ISO 21009-2:2015 specifies operational requirements for static vacuum insulated vessels designed for a maximum allowable pressure of more than 50 kPa (0,5 bar). It may also be used as a guideline for vessels designed for a maximum allowable pressure of less than 50 kPa (0,5 bar).
ISO 21009-2:2015 applies to vessels designed for cryogenic fluids specified in ISO 21009‑1.
Static cryogenic vessels are often partly equipped by the manufacturer, but may be installed or re-installed by another party, such as the operator, user or owner.
NOTE 1 For the installation of these vessels, additional requirements can apply; these are defined in specific regulations.
NOTE 2 Some requirements of this standard can be covered by local regulations, e.g. safety distances, occupational safety and health. Where there is a conflict between the requirements of this International Standard and any applicable local regulation, the local regulation always takes precedence.
A standard is reviewed every 5 years
Stage: 90.92 (To be revised)
Will be replaced byUnder development