This standard was last reviewed and confirmed in 2015. Therefore this version remains current.
Specifies the procedure for the preparation of crude samples and dried samples and of natural and synthetic materials having a molar ratio sodium fluoride/aluminium trifluoride between 3 and 1,7 approximately. The crude sample is intended for the determination of geometric characteristics, for certain physical and physico-chemical tests and for moisture determination. The dried sample serves especially for chemical tests. The principle of the procedure consists in grinding followed by sieving of the sample until the whole passes through a sieve of mesh aperture 0,125 mm. Thorough mixing and drying at approximately 110 °C.
Status : PublishedPublication date : 1976-09
Edition : 1Number of pages : 2
Technical Committee:Materials for the production of primary aluminium
Buy this standard
A standard is reviewed every 5 years
Revisions / Corrigenda
Now under review