This standard was last reviewed and confirmed in 2006. Therefore this version remains current.
This International Standard defines the mapping functions in exchanges of private integrated services networks (PISN)
required for their attachment to Virtual Private Network (VPN) functionality of public (or third party provided) network
Mapping functions are required to provide for the physical termination of the interface at the C or T reference points, and for
the mapping of user channels and signalling information flows at the Q reference point to the appropriate channels or timeslots
at the C or T reference point.
At the T reference, point it is assumed that the protocol used on the D channel is the enhanced version of DSS1. These protocol
enhancements are given in Annex Q and Annex X of Recommendations Q.931 and Q.932 respectively.
The mapping function specified in this International Standard are applicable to PINXs connected to a VPN that supports either
PISN information flows between accesses and/or PISN services.
The C and Q reference points are defined in ISO/IEC 11579-1. The T reference point is defined in ITU-T
The types of interfaces at the C or T reference point covered by this International Standard are the ISDN primary rate interface
and the basic access interface.
Status : PublishedPublication date : 2001-10
Edition : 1Number of pages : 12
Technical Committee:Telecommunications and information exchange between systems
Buy this standard