• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 39/SC 2 Секретариата Этап ICS
ISO 230-10:2011
Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
95.99
ISO 230-10:2011/Amd 1:2014
Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools — Amendment 1: Measuring performance with scanning probes
95.99
ISO 230-10:2016
Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
90.92
ISO 230-10:2016/CD Amd 1
Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools — Amendment 1: .
30.98
ISO 230-1:1986
Acceptance code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
95.99
ISO 230-1:1996
Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
95.99
ISO 230-1:2012
Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
90.93
ISO 230-2:1988
Acceptance code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled machine tools
95.99
ISO 230-2:1997
Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
95.99
ISO 230-2:1997/Cor 1:1999
Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes — Technical Corrigendum 1
95.99
ISO 230-2:2006
Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
95.99
ISO 230-2:2014
Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
90.93
ISO 230-2:2014/Amd 1:2016
Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes — Amendment 1
60.60
ISO 230-3:2001
Test code for machine tools — Part 3: Determination of thermal effects
95.99
ISO 230-3:2007
Test code for machine tools — Part 3: Determination of thermal effects
90.92
ISO 230-4:1996
Test code for machine tools — Part 4: Circular tests for numerically controlled machine tools
95.99
ISO 230-4:2005
Test code for machine tools — Part 4: Circular tests for numerically controlled machine tools
90.93
ISO 230-6:2002
Test code for machine tools — Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
90.93
ISO 230-7:2006
Test code for machine tools — Part 7: Geometric accuracy of axes of rotation
95.99
ISO 230-7:2015
Test code for machine tools — Part 7: Geometric accuracy of axes of rotation
60.60
ISO/CD 230-10
Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
30.60
ISO/FDIS 230-3
Test code for machine tools — Part 3: Determination of thermal effects
50.92
ISO/TR 230-11:2018
Test code for machine tools — Part 11: Measuring instruments suitable for machine tool geometry tests
60.60
ISO/TR 230-8:2009
Test code for machine tools — Part 8: Determination of vibration levels
95.99
ISO/TR 230-8:2010
Test code for machine tools — Part 8: Vibrations
60.60
ISO/TR 230-9:2005
Test code for machine tools — Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
90.93
ISO 1701-0:1984
Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Part 0: General introduction
95.99
ISO 1701-1:2004
Test conditions for milling machines with table of variable height — Testing of the accuracy — Part 1: Machines with horizontal spindle
90.93
ISO 1701-2:1997
Test conditions for milling machines with table of variable height — Testing of the accuracy — Part 2: Machines with horizontal spindle
95.99
ISO 1701-2:2004
Test conditions for milling machines with table of variable height — Testing of accuracy — Part 2: Machines with vertical spindle
90.93
ISO 1701-3:1997
Test conditions for milling machines with table of variable height — Testing of accuracy — Part 3: Machines with vertical spindle
95.99
ISO 1701:1974
Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy
95.99
ISO 1708:1983
Acceptance conditions for general purpose parallel lathes — Testing of the accuracy
95.99
ISO 1708:1989
Acceptance conditions for general purpose parallel lathes — Testing of the accuracy
90.93
ISO 1984-0:1984
Test conditions for milling machines with table of fixed height, with horizontal or vertical spindle — Part 0: General introduction
95.99
ISO 1984-1:2001
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy — Part 1: Machines with horizontal spindle
90.93
ISO 1984-2:2001
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy — Part 2: Machines with vertical spindle
90.93
ISO 1984:1982
Acceptance conditions for milling machines with table of fixed height with horizontal or vertical spindle — Testing of accuracy
95.99
ISO 1985:1985
Acceptance conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of accuracy
95.99
ISO 1985:1998
Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy
95.99
ISO 1985:2015
Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy
60.60
ISO 1986-1:2001
Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of the accuracy — Part 1: Machines with a table length of up to 1 600 mm
95.99
ISO 1986-1:2014
Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of the accuracy — Part 1: Machines with table length of up to 1 600 mm
90.93
ISO 1986:1985
Acceptance conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of accuracy
95.99
ISO 2407:1984
Acceptance conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy
95.99
ISO 2407:1997
Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy
90.93
ISO 2407:1997/Amd 1:2016
Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy — Amendment 1
60.60
ISO 2423:1982
Acceptance conditions for radial drilling machines with the arm adjustable in height — Testing of accuracy
90.93
ISO 2433:1984
Acceptance conditions for external cylindrical grinding machines with a movable table — Testing of accuracy
95.99
ISO 2433:1999
Machine tools — Test conditions for external cylindrical and universal grinding machines with a movable table — Testing of accuracy
90.93
ISO 2772-1:1973
Test conditions for box type vertical drilling machines — Testing of the accuracy — Part 1: Geometrical tests
95.99
ISO 2772-2:1974
Test conditions for box type vertical drilling machines — Testing of the accuracy — Part 2: Practical test
95.99
ISO 2772:2019
Test conditions for box type vertical drilling machines — Testing of the accuracy
60.60
ISO 2773-1:1973
Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 1: Geometrical tests
90.20
ISO 2773-2:1973
Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 2: Practical test
90.20
ISO 3070-0:1982
Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 0: General introduction
95.99
ISO 3070-1:1987
Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table-type machines
95.99
ISO 3070-1:1987/Add 1:1987
Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table-type machines — Addendum 1
95.99
ISO 3070-1:2007
Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 1: Machines with fixed column and movable table
90.93
ISO 3070-2:1997
Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 2: Table-type machines
95.99
ISO 3070-2:2007
Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column and fixed table
95.99
ISO 3070-2:2016
Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column along the X-axis (floor type)
60.60
ISO 3070-3:1982
Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 3: Planer type machines with movable column
95.99
ISO 3070-3:1997
Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 3: Floor type machines with detached, stationary work-holding table
95.99
ISO 3070-3:2007
Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 3: Machines with movable column and movable table
90.93
ISO 3070-4:1998
Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 4: Planer type machines with movable column
95.99
ISO 3190:1975
Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle — Testing of the accuracy
90.93
ISO 3655:1986
Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table — General introduction and testing of the accuracy
90.93
ISO 3686-1:2000
Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle — Testing of the accuracy — Part 1: Single column type machines
90.93
ISO 3686-2:2000
Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle — Testing of the accuracy — Part 2: Portal type machines with moving table
90.93
ISO 3686:1976
Test conditions for turret and single spindle co-ordinate drilling and boring machines with table of fixed height with vertical spindle — High accuracy machines — Testing of the accuracy
95.99
ISO 3875:1990
Acceptance conditions for external cylindrical centreless grinding machines — Testing of the accuracy
95.99
ISO 3875:2004
Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy
90.92
ISO/FDIS 3875.2
Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy
50.00
ISO 4703:1984
Acceptance conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of accuracy
95.99
ISO 4703:2001
Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy
90.93
ISO 5734:1986
Acceptance conditions of mechanical dividing heads for machine tools — Testing of accuracy
90.93
ISO 6155-1:1981
Acceptance conditions for horizontal spindle capstan, turret and single spindle automatic lathes — Testing of the accuracy — Part 1: Machinable bar diameters greater than 25 mm
95.99
ISO 6155-2:1986
Acceptance conditions for horizontal spindle capstan, turret and single spindle automatic lathes — Testing of the accuracy — Part 2: Machinable bar diameters 25 mm or less and chuck diameter up to 160 mm
95.99
ISO 6155:1998
Machine tools — Test conditions for horizontal spindle turret and single spindle automatic lathes — Testing of the accuracy
90.20
ISO 6480:1983
Conditions of acceptance for horizontal internal broaching machines — Testing of the accuracy
95.99
ISO 6480:2019
Test conditions for horizontal internal type broaching machines — Testing of accuracy
60.60
ISO 6481:1981
Acceptance conditions for vertical surface type broaching machines — Testing of accuracy
95.99
ISO 6481:2019
Test conditions for vertical surface type broaching machines — Testing of accuracy
60.60
ISO 6545:1992
Acceptance conditions for gear hobbing machines — Testing of the accuracy
90.93
ISO 6779:1981
Acceptance conditions for broaching machines of vertical internal type — Testing of accuracy
95.99
ISO 6779:2019
Test conditions for vertical internal type broaching machines — Testing of accuracy
60.60
ISO 7572:1984
Conditions of acceptance and installation for work-holding fixed tables of machine tools
95.99
ISO 8636-1:1987
Acceptance conditions for plano-milling machines — Testing of the accuracy — Part 1: Portal-type machines
95.99
ISO 8636-1:2000
Machine tools — Test conditions for bridge-type milling machines — Testing of the accuracy — Part 1: Fixed bridge (portal-type) machines
90.93
ISO 8636-2:1988
Machine tools — Conditions for testing the accuracy of bridge-type milling machines — Part 2: Travelling bridge (gantry-type) machines
95.99
ISO 8636-2:2007
Machine tools — Test conditions for bridge-type milling machines — Testing of the accuracy — Part 2: Travelling bridge (gantry-type) machines
90.92
ISO 8956:1986
Acceptance conditions for copying attachments, integral or otherwise, for lathes — Testing of the accuracy
90.93
ISO 10791-10:2007
Test conditions for machining centres — Part 10: Evaluation of thermal distortions
90.92
ISO 10791-1:1998
Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
95.99
ISO 10791-1:2015
Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
60.60
ISO 10791-2:2001
Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
90.93
ISO 10791-3:1998
Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
90.20
ISO 10791-3:1998/Cor 1:1999
Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis) — Technical Corrigendum 1
60.60
ISO 10791-4:1998
Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
90.20
ISO 10791-5:1998
Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
90.20
ISO 10791-6:1998
Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
95.99
ISO 10791-6:1998/Cor 1:2004
Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations — Technical Corrigendum 1
95.99
ISO 10791-6:2014
Test conditions for machining centres — Part 6: Accuracy of speeds and interpolations
90.20
ISO 10791-7:1998
Test conditions for machining centres — Part 7: Accuracy of a finished test piece
95.99
ISO 10791-7:2014
Test conditions for machining centres — Part 7: Accuracy of finished test pieces
90.92
ISO 10791-8:2001
Test conditions for machining centres — Part 8: Evaluation of contouring performance in the three coordinate planes
90.93
ISO 10791-9:2001
Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
90.93
ISO/FDIS 10791-7.2
Test conditions for machining centres — Part 7: Accuracy of finished test pieces
50.20
ISO/WD 10791-10
Test conditions for machining centres — Part 10: Evaluation of thermal distortions
20.20
ISO 11090-1:1998
Machine tools — Test conditions for die sinking electro-discharge machines (EDM) — Terminology and testing of accuracy — Part 1: Single column machines (cross slide table type and fixed table type)
95.99
ISO 11090-1:2014
Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy — Part 1: Single-column machines (cross-slide table type and fixed-table type)
90.20
ISO 11090-2:1998
Machine tools — Test conditions for die sinking electro-discharge machines (EDM) — Terminology and testing of accuracy — Part 2: Two column machines (slide-head type and cross-slide table type)
95.99
ISO 11090-2:2014
Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy — Part 2: Double-column machines (slide-head type)
90.20
ISO 13041-1:2004
Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spindle
90.92
ISO 13041-2:2008
Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle
90.92
ISO 13041-3:2009
Test conditions for numerically controlled turning machines and turning centres — Part 3: Geometric tests for machines with inverted vertical workholding spindles
90.93
ISO 13041-4:2004
Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
90.93
ISO 13041-5:2006
Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of feeds, speeds and interpolations
95.99
ISO 13041-5:2015
Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of speeds and interpolations
60.60
ISO 13041-6:2005
Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece
95.99
ISO 13041-6:2009
Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece
90.20
ISO 13041-7:2004
Test conditions for numerically controlled turning machines and turning centres — Part 7: Evaluation of contouring performance in the coordinate planes
90.93
ISO 13041-8:2004
Test conditions for numerically controlled turning machines and turning centres — Part 8: Evaluation of thermal distortions
90.93
ISO/FDIS 13041-1
Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with horizontal workholding spindle(s)
50.92
ISO/FDIS 13041-2
Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle
50.92
ISO 14137:2000
Machine tools — Test conditions for wire electrical-discharge machines (wire EDM) — Terminology and testing of the accuracy
95.99
ISO 14137:2015
Test conditions for wire electrical-discharge machines (wire EDM) — Testing of the accuracy
60.60
ISO/TR 16907:2015
Machine tools — Numerical compensation of geometric errors
60.60
ISO/DTR 17243-3
Machine tool spindles — Evaluation of machine tool spindle vibrations by measurements on spindle housing — Part 3: Gear-driven spindles spindles with rolling element bearings operating at speeds between 600 r/min and 12 000 r/min
30.99
ISO/TR 17243-1:2014
Machine tool spindles — Evaluation of machine tool spindle vibrations by measurements on spindle housing — Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1
60.60
ISO/TR 17243-2:2017
Machine tool spindles — Evaluation of spindle vibrations by measurements on non-rotating parts — Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min
60.60
ISO/FDIS 17543-1
Machine tools — Test conditions for universal spindle heads — Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis)
50.92
ISO/DIS 19744-1
Test conditions for numerically controlled broaching machines — Testing of the accuracy — Part 1: Vertical surface type broaching machines
40.98
ISO/FDIS 19744
Test conditions for numerically controlled broaching machines — Testing of accuracy — Vertical surface type broaching machines
50.00
ISO 26303:2012
Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools
90.93

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.