Reduction sleeves and extension sockets for tools with Morse taper shanks

Reduction sleeves and extension sockets for tools with Morse taper shanks

Machine tools — Self-holding tapers for tool shanks

Machine tools — Self-holding tapers for tool shanks

7/24 tapers for tool shanks for manual changing

7/24 tapers for tool shanks for manual changing

Machine tool tables — T-slots and corresponding bolts

Machine tool tables — T-slots and corresponding bolts

Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 1: Type A

Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connection

Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connection

Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 2: Camlock type

Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type

Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type — Technical Corrigendum 1

Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 3: Bayonet type

Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 3: Bayonet type

Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 4: Cylindrical connection

Milling machine arbors with 7/24 tapers — Part 1: Dimensions

Milling machine arbors with 7/24 tapers — Part 1: Dimensions and designation

Milling machine arbors with 7/24 tapers — Part 2: Accessories

Machine tools — Morse taper shanks — Cotter slots with taper keys

Self centring, manually operated chucks for machine tools — Normal accuracy — Acceptance test specifications (geometrical tests)

Self-centring manually-operated chucks for machine tools — Acceptance test specifications (geometrical tests)

Machine tools — Test conditions for self-centring, manually operated chucks with one-piece jaws

Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 1: Manually operated chucks with tongue and groove type jaws

Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 2: Power-operated chucks with tongue and groove type jaws

Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 3: Power-operated chucks with serrated jaws

Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications

Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications

Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions

Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions

Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper

Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper

Cutter arbors with tenon drive — Part 3: Dimensions of hollow taper interface with flange contact surface

Cutter arbors with tenon drive — Dimensions

Cutter arbors with tenon drive — Dimensions

Reduction sleeves with external 7/24 taper for tools with Morse taper shanks

Reduction sleeves with external 7/24 taper for tools with Morse taper shanks

Counterbores with Morse taper shanks and detachable pilots

Counterbores with Morse taper shanks and detachable pilots

Jig bushes and accessories for drilling purposes — Dimensions

Jig bushes — Definitions and nomenclature

Machine tools — Positive drive of Morse tapers

Machine tools — Positive drive of Morse tapers

Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks

Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 1: Dimensions of the driving system of tool shanks

Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 2: Connecting dimensions of chucks

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designation

Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw

Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw

Polygonal turret interface with flat contact surface — Part 1: Shanks of type F, H and A

Polygonal turret interface with flat contact surface — Part 2: Receivers of type F, H, A and X for shanks of type F, H and A

Polygonal turret interface with flat contact surface — Part 3: Coupling for driven tool holders with shanks of type F and A

Test conditions of mechanical dividing heads for machine tools — Testing of the accuracy

Acceptance conditions of mechanical dividing heads for machine tools — Testing of accuracy

Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions

Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions — Addendum 1: Conicity tolerances

Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF

Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristics

Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF

Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF

Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF

Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF

Conditions of acceptance and installation for work-holding fixed tables of machine tools

7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF

7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF

7/24 tapers for tool shanks for automatic changing — Tapers for spindle noses

Machine tools — Jaw mountings on power chucks

Cutter arbors with parallel key and tenon drive — Part 1: General dimensions

Cutter arbors with parallel key and tenon drive — Part 1: General dimensions

Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface

Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface

Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers

Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer

Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers

Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer

Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface

Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system

Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions

Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions

Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs

Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs

Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs

Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat

Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat

Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat

Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat

Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat

Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat

Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat

Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat

Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat

Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat

Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat

Tool holders with cylindrical shank — Part 7: Type F with taper seat

Tool holders with cylindrical shank — Part 7: Type F with taper seat

Tool holders with cylindrical shank — Part 7: Type F with taper seat

Tool holders with cylindrical shank — Part 8: Type Z, accessories

Collets for tool holders with taper ratio 1:10 — Collets, hoders,nuts

Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts

Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions

Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB

Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions

Hollow taper interface with flange contact surface — Part 2: Receivers of types A, C and E for hollow taper shanks of types A, AB, C, CB and EB

Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools

Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools

Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U

Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools

Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools

Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U

Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES

Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES

Code of practice for the safe operation of work-holding chucks used on lathes

Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions

Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions

Machine tools — Work holding chucks — Vocabulary

Medium-transfer units for tool interfaces — Part 1: Transfer units for hollow taper shanks in accordance with the ISO 12164 series

Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series

Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks

Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks

Modular taper interface with ball track system — Part 2: Dimensions and designation of receivers

Modular taper interface with ball track system — Part 3: Dimensions of shanks for interface utilizing four locking elements

Modular taper interface with ball track system — Part 4: Dimensions of receivers for interface utilizing four locking elements

Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks

Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks

Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks

Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers

Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers