Standards catalogue

ISO/TC 156

Corrosion of metals and alloys

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 156 Secretariat Stage ICS
ISO 3231:1993
Paints and varnishes -- Determination of resistance to humid atmospheres containing sulfur dioxide
90.92
ISO 3651-3:2017
Determination of resistance to intergranular corrosion of stainless steels -- Part 3: Corrosion test for low-Cr ferritic stainless steels
60.60
ISO 6509:1981 [Withdrawn]
Corrosion of metals and alloys -- Determination of dezincification resistance of brass
95.99
ISO 6509-1:2014
Corrosion of metals and alloys -- Determination of dezincification resistance of copper alloys with zinc -- Part 1: Test method
60.60
ISO 6509-2:2017
Corrosion of metals and alloys -- Determination of dezincification resistance of copper alloys with zinc -- Part 2: Assessment criteria
60.60
ISO 6988:1985
Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture
90.92
ISO 7384:1986
Corrosion tests in artificial atmosphere -- General requirements
90.93
ISO 7441:1984 [Withdrawn]
Corrosion of metals and alloys -- Determination of bimetallic corrosion in outdoor exposure corrosion tests
95.99
ISO 7441:2015
Corrosion of metals and alloys -- Determination of bimetallic corrosion in atmospheric exposure corrosion tests
60.60
ISO 7539-1:1987 [Withdrawn]
Corrosion of metals and alloys -- Stress corrosion testing -- Part 1: General guidance on testing procedures
95.99
ISO 7539-1:2012
Corrosion of metals and alloys -- Stress corrosion testing -- Part 1: General guidance on testing procedures
90.20
ISO 7539-2:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 2: Preparation and use of bent-beam specimens
90.93
ISO 7539-3:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 3: Preparation and use of U-bend specimens
90.93
ISO 7539-4:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 4: Preparation and use of uniaxially loaded tension specimens
90.93
ISO 7539-5:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 5: Preparation and use of C-ring specimens
90.93
ISO 7539-6:1989 [Withdrawn]
Corrosion of metals and alloys -- Stress corrosion testing -- Part 6: Preparation and use of pre-cracked specimens
95.99
ISO 7539-6:2003 [Withdrawn]
Corrosion of metals and alloys -- Stress corrosion testing -- Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
95.99
ISO 7539-6:2011
Corrosion of metals and alloys -- Stress corrosion testing -- Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
90.92
ISO/DIS 7539-6 [Under development]
Corrosion of metals and alloys -- Stress corrosion testing -- Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
40.20
ISO 7539-7:1989 [Withdrawn]
Corrosion of metals and alloys -- Stress corrosion testing -- Part 7: Slow strain rate testing
95.99
ISO 7539-7:2005
Corrosion of metals and alloys -- Stress corrosion testing -- Part 7: Method for slow strain rate testing
90.93
ISO 7539-8:2000
Corrosion of metals and alloys -- Stress corrosion testing -- Part 8: Preparation and use of specimens to evaluate weldments
90.93
ISO 7539-9:2003
Corrosion of metals and alloys -- Stress corrosion testing -- Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
90.93
ISO 7539-10:2013
Corrosion of metals and alloys -- Stress corrosion testing -- Part 10: Reverse U-bend method
90.20
ISO 7539-11:2013
Corrosion of metals and alloys -- Stress corrosion testing -- Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
60.60
ISO 8044:1986 [Withdrawn]
Corrosion of metals and alloys -- Terms and definitions
95.99
ISO 8044:1989 [Withdrawn]
Corrosion of metals and alloys -- Vocabulary
95.99
95.99
ISO 8044:1999 [Withdrawn]
Corrosion of metals and alloys -- Basic terms and definitions
95.99
ISO 8044:2015
Corrosion of metals and alloys -- Basic terms and definitions
90.92
ISO/NP 8044 [Under development]
Corrosion of metals and alloys -- Basic terms and definitions
10.99
ISO 8407:1991 [Withdrawn]
Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens
95.99
ISO 8407:2009
Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens
90.92
ISO/CD 8407 [Under development]
Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens
30.00
ISO 8565:1992 [Withdrawn]
Metals and alloys -- Atmospheric corrosion testing -- General requirements for field tests
95.99
ISO 8565:2011
Metals and alloys -- Atmospheric corrosion testing -- General requirements
90.93
ISO 9223:1992 [Withdrawn]
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification
95.99
ISO 9223:2012
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification, determination and estimation
90.93
ISO 9224:1992 [Withdrawn]
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guiding values for the corrosivity categories
95.99
ISO 9224:2012
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guiding values for the corrosivity categories
90.93
ISO 9225:1992 [Withdrawn]
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of pollution
95.99
ISO 9225:2012
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of environmental parameters affecting corrosivity of atmospheres
90.93
ISO 9226:1992 [Withdrawn]
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity
95.99
ISO 9226:2012
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity
90.93
ISO 9227:1990 [Withdrawn]
Corrosion tests in artificial atmospheres -- Salt spray tests
95.99
ISO 9227:2006 [Withdrawn]
Corrosion tests in artificial atmospheres -- Salt spray tests
95.99
ISO 9227:2012 [Withdrawn]
Corrosion tests in artificial atmospheres -- Salt spray tests
95.99
ISO 9227:2017
Corrosion tests in artificial atmospheres -- Salt spray tests
60.60
ISO 9400:1990
Nickel-based alloys -- Determination of resistance to intergranular corrosion
90.93
ISO 9591:1992 [Withdrawn]
Corrosion of aluminium alloys -- Determination of resistance to stress corrosion cracking
95.99
ISO 9591:2004
Corrosion of aluminium alloys -- Determination of resistance to stress corrosion cracking
90.93
ISO 10062:1991 [Withdrawn]
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
95.99
ISO 10062:2006
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
90.93
ISO 10270:1995
Corrosion of metals and alloys -- Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
90.93
60.60
ISO 11130 [Under development]
Corrosion of metals and alloys -- Alternate immersion test in salt solution
60.00
ISO 11130:1999 [Withdrawn]
Corrosion of metals and alloys -- Alternate immersion test in salt solution
95.99
ISO 11130:2010
Corrosion of metals and alloys -- Alternate immersion test in salt solution
90.92
ISO 11303:2002
Corrosion of metals and alloys -- Guidelines for selection of protection methods against atmospheric corrosion
90.92
ISO/DTR 11303 [Under development]
Corrosion of metals and alloys -- Guidelines for selection of protection methods against atmospheric corrosion
30.60
ISO 11306:1998
Corrosion of metals and alloys -- Guidelines for exposing and evaluating metals and alloys in surface sea water
90.93
ISO 11463:1995
Corrosion of metals and alloys -- Evaluation of pitting corrosion
90.92
ISO/CD 11463 [Under development]
Corrosion of metals and alloys -- Evaluation of pitting corrosion
30.00
ISO 11474:1998
Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
90.93
ISO 11782-1:1998
Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 1: Cycles to failure testing
90.93
ISO 11782-2:1998
Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens
90.93
ISO 11844-1:2006
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 1: Determination and estimation of indoor corrosivity
90.92
ISO/CD 11844-1 [Under development]
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 1: Determination and estimation of indoor corrosivity
30.99
ISO 11844-2:2005
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 2: Determination of corrosion attack in indoor atmospheres
90.92
ISO/CD 11844-2 [Under development]
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 2: Determination of corrosion attack in indoor atmospheres
30.99
ISO 11844-3:2006
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 3: Measurement of environmental parameters affecting indoor corrosivity
90.92
ISO/CD 11844-3 [Under development]
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 3: Measurement of environmental parameters affecting indoor corrosivity
30.99
ISO 11845:1995
Corrosion of metals and alloys -- General principles for corrosion testing
90.92
ISO/CD 11845 [Under development]
Corrosion of metals and alloys -- General principles for corrosion testing
30.00
ISO 11846:1995
Corrosion of metals and alloys -- Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
90.93
ISO 11881:1999
Corrosion of metals and alloys -- Exfoliation corrosion testing of aluminium alloys
90.93
60.60
ISO 12473:2006 [Withdrawn]
General principles of cathodic protection in sea water
95.99
ISO 12473:2017
General principles of cathodic protection in seawater
60.60
ISO 12696:2012 [Withdrawn]
Cathodic protection of steel in concrete
95.99
ISO 12696:2016
Cathodic protection of steel in concrete
60.60
ISO 12732:2006
Corrosion of metals and alloys -- Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
90.93
ISO 13174:2012
Cathodic protection of harbour installations
90.20
ISO 13573:2012
Corrosion of metals and alloys -- Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
90.20
ISO 14802:2012
Corrosion of metals and alloys -- Guidelines for applying statistics to analysis of corrosion data
90.20
ISO 14993:2001
Corrosion of metals and alloys -- Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions
90.92
ISO/DIS 14993 [Under development]
Corrosion of metals and alloys -- Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
40.20
ISO 15158:2014
Corrosion of metals and alloys -- Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
60.60
ISO 15257:2017
Cathodic protection -- Competence levels of cathodic protection persons -- Basis for a certification scheme
60.60
ISO 15324:2000
Corrosion of metals and alloys -- Evaluation of stress corrosion cracking by the drop evaporation test
90.93
ISO 15329:2006
Corrosion of metals and alloys -- Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
90.93
ISO 16151:2005
Corrosion of metals and alloys -- Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
90.93
ISO/DIS 16151 [Under development]
Corrosion of metals and alloys -- Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
40.20
ISO/TR 16203:2016
Corrosion of metals and alloys -- Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
60.60
ISO/TR 16208:2014
Corrosion of metals and alloys -- Test method for corrosion of materials by electrochemical impedance measurements
60.60
ISO/TR 16335:2013
Corrosion of metals and alloys -- Corrosion tests in artificial atmospheres -- Guidelines for selection of accelerated corrosion test for product qualification
60.60
ISO 16539:2013
Corrosion of metals and alloys -- Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process -- "Dry" and "wet" conditions at constant absolute humidity
90.20
ISO 16540:2015
Corrosion of metals and alloys -- Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
60.60
ISO 16701:2003 [Withdrawn]
Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
95.99
ISO 16701:2015
Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
60.60
ISO 16784-1:2006
Corrosion of metals and alloys -- Corrosion and fouling in industrial cooling water systems -- Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
90.93
ISO 16784-2:2006
Corrosion of metals and alloys -- Corrosion and fouling in industrial cooling water systems -- Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
90.93
ISO 17081:2004 [Withdrawn]
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
95.99
ISO 17081:2014
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
60.60
ISO 17093:2015
Corrosion of metals and alloys -- Guidelines for corrosion test by electrochemical noise measurements
60.60
ISO 17224:2015
Corrosion of metals and alloys -- Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
60.60
ISO 17245:2015
Corrosion of metals and alloys -- Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
60.60
ISO 17248:2015
Corrosion of metals and alloys -- Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
60.60
ISO 17474:2012
Corrosion of metals and alloys -- Conventions applicable to electrochemical measurements in corrosion testing
90.93
ISO 17475:2005
Corrosion of metals and alloys -- Electrochemical test methods -- Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
90.93
60.60
ISO 17752:2012
Corrosion of metals and alloys -- Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
90.93
ISO 17864:2005
Corrosion of metals and alloys -- Determination of the critical pitting temperature under potientiostatic control
90.93
ISO 17918:2015
Corrosion of metals and alloys -- Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
60.60
ISO 18069:2015
Corrosion of metals and alloys -- Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
60.60
ISO 18070:2015
Corrosion of metals and alloys -- Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
60.60
ISO 18086:2015
Corrosion of metals and alloys -- Determination of AC corrosion -- Protection criteria
60.60
ISO 18089:2015
Corrosion of metals and alloys -- Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
60.60
ISO/DIS 18897 [Deleted]
Corrosion of metals and alloys -- Standard test method for particle-free erosion corrosion of metallic materials by jet-in-slit
40.98
ISO/FDIS 19097-1 [Under development]
Accelerated life test method of mixed metal oxide anodes for cathodic protection -- Part 1: Application in concrete
50.20
ISO/FDIS 19097-2 [Under development]
Accelerated life test method of mixed metal oxide anodes for cathodic protection -- Part 2: Application in soils and natural waters
50.20
ISO 19280:2017
Corrosion of metals and alloys -- Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
60.60
ISO/DTR 19735 [Under development]
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guidelines for mapping areas of increased risk of corrosion
30.60
ISO/DIS 20728 [Under development]
Corrosion of metal and alloys -- Determination of resistance of magnesium alloys to stress corrosion cracking
40.99
ISO/WD 21062 [Under development]
Corrosion of Metals and Alloys -- Method to Compare the Corrosion Rates of the Embedded Steel Reinforcement in Concrete Exposed to the Simulated Marine Environments
20.20
ISO/DIS 21153 [Under development]
Corrosion of metals and alloys -- Measurement of environmentally assisted small crack growth rate
40.20
ISO 21207:2004 [Withdrawn]
Corrosion tests in artificial atmospheres -- Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
95.99
95.99
ISO 21207:2015
Corrosion tests in artificial atmospheres -- Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
60.60
ISO 21601:2013
Corrosion of metals and alloys -- Guidelines for assessing the significance of stress corrosion cracks detected in service
90.20
ISO 21608:2012
Corrosion of metals and alloys -- Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
90.93
ISO 21610:2009
Corrosion of metals and alloys -- Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
90.93
ISO/CD 22410 [Under development]
Electrochemical measurement of ion transfer resistance and characterization of Patina Rust on weathering steel
30.00
ISO/AWI 22426 [Under development]
Assessment of the effectiveness of cathodic protection based on coupon measurements
20.00
ISO/CD 22479 [Under development]
Corrosion of metals and alloys -- Sulfur dioxide test in a humid atmosphere (Fixed gas method)
30.99
ISO/AWI 22848 [Under development]
Test method for measuring stress corrosion crack growth rate of austenitic steels and alloys under constant-load condition in high-temperature water
20.00
ISO/AWI 22858 [Under development]
Test Method for Monitoring Atmospheric Corrosion Rate by Electrochemical Measurements
20.00
ISO/AWI 22910 [Under development]
Corrosion of metals and alloys -- Measurement of the Electrochemical Critical Localized Corrosion Temperature (E-CLCT) for Stacked Ti Alloys Fabricated by the Additive Manufacturing Method
20.00
ISO 26146:2012
Corrosion of metals and alloys -- Method for metallographic examination of samples after exposure to high-temperature corrosive environments
90.20

No matching records found