• Filter:

  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 61/SC 13 Secretariat Stage ICS
ISO 527-4:1997
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
90.60
ISO 527-5:1997
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
95.99
ISO 527-5:2009
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
90.60
ISO 1172:1975
Textile glass reinforced plastics — Determination of loss on ignition
95.99
ISO 1172:1996
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
90.93
ISO 1268-10:2005
Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens
90.93
ISO 1268-11:2005
Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates
90.93
ISO 1268-1:2001
Fibre-reinforced plastics — Methods of producing test plates — Part 1: General conditions
90.93
ISO 1268-2:2001
Fibre-reinforced plastics — Methods of producing test plates — Part 2: Contact and spray-up moulding
90.93
ISO 1268-3:2000
Fibre-reinforced plastics — Methods of producing test plates — Part 3: Wet compression moulding
90.93
ISO 1268-4:2005
Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs
90.93
ISO 1268-4:2005/Amd 1:2010
Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs — Amendment 1
60.60
ISO 1268-5:2001
Fibre-reinforced plastics — Methods of producing test plates — Part 5: Filament winding
90.93
ISO 1268-6:2002
Fibre-reinforced plastics — Methods of producing test plates — Part 6: Pultrusion moulding
90.93
ISO 1268-7:2001
Fibre-reinforced plastics — Methods of producing test plates — Part 7: Resin transfer moulding
90.93
ISO 1268-8:2004
Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC
90.93
ISO 1268-9:2003
Fibre-reinforced plastics — Methods of producing test plates — Part 9: Moulding of GMT/STC
90.93
ISO 1268:1974
Plastics — Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes
95.99
ISO 1886:1980
Textile glass — Method of sampling applicable to batches
95.99
ISO 1886:1990
Reinforcement fibres — Sampling plans applicable to received batches
95.99
ISO 1887:1980
Textile glass — Determination of combustible matter content
95.99
ISO 1887:1995
Textile glass — Determination of combustible-matter content
95.99
ISO 1887:2014
Textile glass — Determination of combustible-matter content
90.60
ISO 1888:1979
Textile glass — Determination of the average diameter of staple fibres or continuous filaments constituting a textile glass yarn — Cross-section method
95.99
ISO 1888:1996
Textile glass — Staple fibres or filaments — Determination of average diameter
95.99
ISO 1888:2006
Textile glass — Staple fibres or filaments — Determination of average diameter
90.93
ISO 1889:1975
Textile glass products — Continuous filament yarns, staple fibre yarns and rovings in the form of packages — Determination of linear density
95.99
ISO 1889:1987
Textile glass — Continuous filament yarns, staple fibre yarns, textured yarns and rovings (packages) — Determination of linear density
95.99
ISO 1889:1997
Reinforcement yarns — Determination of linear density
95.99
ISO 1889:2009
Reinforcement yarns — Determination of linear density
90.20
ISO 1890:1986
Textile glass — Continuous filament yarns and staple fibre yarns — Determination of twist
95.99
ISO 1890:1997
Reinforcement yarns — Determination of twist
95.99
ISO 1890:2009
Reinforcement yarns — Determination of twist
90.20
ISO 2078:1985
Textile glass — Yarns — Designation
95.99
ISO 2078:1993
Textile glass — Yarns — Designation
90.60
ISO 2078:1993/Amd 1:2015
Textile glass — Yarns — Designation — Amendment 1
60.60
ISO 2113:1981
Textile glass — Woven fabrics — Basis for specification
95.99
ISO 2113:1996
Reinforcement fibres — Woven fabrics — Basis for a specification
90.93
ISO 2113:1996/Cor 1:2003
Reinforcement fibres — Woven fabrics — Basis for a specification — Technical Corrigendum 1
60.60
ISO 2558:1974
Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene
95.99
ISO 2558:2010
Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene
90.93
ISO 2559:1980
Textile glass — Mats (made from chopped or continuous strands) — Basis for a specification
95.99
ISO 2559:1991
Textile glass — Mats (made from chopped or continuous strands) — Basis for a specification
95.99
ISO 2559:2000
Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications
95.99
ISO 2559:2011
Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications
90.93
ISO 2797:1986
Textile glass — Rovings — Basis for a specification
95.99
ISO 2797:2017
Textile glass — Rovings — Basis for a specification
60.60
ISO 3268:1978
Plastics — Glass reinforced materials — Determination of tensile properties
95.99
ISO 3341:1984
Textile glass — Yarns — Determination of breaking force and breaking elongation
95.99
ISO 3341:2000
Textile glass — Yarns — Determination of breaking force and breaking elongation
90.93
ISO 3342:1987
Textile glass — Mats — Determination of tensile breaking force
95.99
ISO 3342:1995
Textile glass — Mats — Determination of tensile breaking force
95.99
ISO 3342:2011
Textile glass — Mats — Determination of tensile breaking force
90.93
ISO 3343:1984
Textile glass — Yarns — Determination of twist balance index
95.99
ISO 3343:2010
Reinforcement yarns — Determination of twist balance index
90.93
ISO 3344:1977
Textile glass products — Determination of moisture content
95.99
ISO 3344:1997
Reinforcement products — Determination of moisture content
90.93
ISO 3374:1980
Textile glass — Glass mats — Determination of mass per unit area
95.99
ISO 3374:1990
Textile glass mats — Determination of mass per unit area
95.99
ISO 3374:2000
Reinforcement products — Mats and fabrics — Determination of mass per unit area
90.93
ISO 3375:1975
Textile glass — Determination of stiffness of rovings
95.99
ISO 3375:2009
Textile glass — Determination of stiffness of rovings
90.93
ISO 3597-1:1993
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods
95.99
ISO 3597-1:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods
90.60
ISO 3597-2:1993
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
95.99
ISO 3597-2:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
90.60
ISO 3597-3:1993
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
95.99
ISO 3597-3:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
90.60
ISO 3597-4:1993
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength
95.99
ISO 3597-4:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength
90.60
ISO 3597:1977
Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of flexural (cross-breaking) strength
95.99
ISO 3598:1986
Textile glass — Yarns — Basis for a specification
95.99
ISO 3598:2011
Textile glass — Yarns — Basis for a specification
90.93
ISO 3605:1978
Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of compressive strength
95.99
ISO 3605:1987
Textile glass — Rovings — Determination of compressive strength of rod composites
95.99
ISO 3616:1977
Textile glass — Mats — Determination of average thickness, thickness under load and recovery after compression
95.99
ISO 3616:2001
Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression
90.93
ISO 3616:2001/Amd 1:2017
Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression — Amendment 1
60.60
ISO 4585:1989
Textile glass reinforced plastics — Determination of apparent interlaminar shear properties by short-beam test
95.99
ISO 4602:1978
Textile glass — Woven fabrics — Determination of number of yarns per unit length of warp and weft
95.99
ISO 4602:1997
Reinforcements — Woven fabrics — Determination of number of yarns per unit length of warp and weft
95.99
ISO 4602:2010
Reinforcements — Woven fabrics — Determination of number of yarns per unit length of warp and weft
90.93
ISO 4603:1978
Textile glass — Woven fabrics — Determination of thickness
95.99
ISO 4603:1993
Textile glass — Woven fabrics — Determination of thickness
90.93
ISO 4603:1993/Amd 1:2010
Textile glass — Woven fabrics — Determination of thickness — Amendment 1
60.60
ISO 4604:1978
Textile glass — Woven fabrics — Determination of conventional flexural stiffness — Fixed angle flexometer method
95.99
ISO 4604:2011
Reinforcement fabrics — Determination of conventional flexural stiffness — Fixed-angle flexometer method
90.93
ISO 4605:1978
Textile glass — Woven fabrics — Determination of mass per unit area
95.99
ISO 4606:1979
Textile glass — Woven fabric — Determination of tensile breaking force and breaking elongation by the strip method
95.99
ISO 4606:1995
Textile glass — Woven fabric — Determination of tensile breaking force and elongation at break by the strip method
90.93
ISO 4899:1982
Textile glass reinforced thermosetting plastics — Properties and test methods
95.99
ISO 4899:1993
Textile-glass-reinforced thermosetting plastics — Properties and test methods
90.93
ISO 4900:1990
Textile glass — Mats and fabrics — Determination of contact mouldability
95.99
ISO 4900:2011
Textile glass — Mats and fabrics — Determination of contact mouldability
90.93
ISO 5025:1978
Textile glass — Woven fabric — Determination of width and length
95.99
ISO 5025:1997
Reinforcement products — Woven fabrics — Determination of width and length
95.99
ISO 5025:2017
Reinforcement products — Woven fabrics — Determination of width and length
60.60
ISO 7822:1990
Textile glass reinforced plastics — Determination of void content — Loss on ignition, mechanical disintegration and statistical counting methods
90.93
ISO 8515:1991
Textile-glass-reinforced plastics — Determination of compressive properties in the direction parallel to the plane of lamination
95.99
ISO 8516:1987
Textile glass — Textured yarns — Basis for a specification
95.99
ISO 8516:2011
Textile glass — Textured yarns — Basis for a specification
90.93
ISO 8605:1989
Textile glass reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
95.99
ISO 8605:2001
Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
90.93
ISO 8606:1990
Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification
90.93
ISO 9163:1996
Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings
95.99
ISO 9163:2005
Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings
90.93
ISO 9291:1996
Textile-glass-reinforced plastics — Rovings — Preparation of unidirectional plates by winding
95.99
ISO 9353:1991
Glass-reinforced plastics — Preparation of plates with unidirectional reinforcements by bag moulding
95.99
ISO 9782:1993
Plastics — Reinforced moulding compounds and prepregs — Determination of apparent volatile-matter content
90.93
ISO 10119:1992
Carbon fibre — Determination of density
95.99
ISO 10119:2002
Carbon fibre — Determination of density
90.92
ISO/DIS 10119
Carbon fibre — Determination of density
40.60
ISO 10120:1991
Carbon fibre — Determination of linear density
95.99
ISO 10122:1995
Reinforcement materials — Tubular braided sleeves — Basis for a specification
95.99
ISO 10122:2014
Reinforcement materials — Tubular braided sleeves — Basis for a specification
90.60
ISO 10352:1991
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
95.99
ISO 10352:1997
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
95.99
ISO 10352:2010
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
90.92
ISO/DIS 10352
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area and fibre mass per unit area
40.60
ISO 10371:1993
Reinforcement materials — Braided tapes — Basis for a specification
90.93
ISO 10548:1994
Carbon fibre — Determination of size content
95.99
ISO 10548:2002
Carbon fibre — Determination of size content
90.93
ISO 10548:2002/Cor 1:2008
Carbon fibre — Determination of size content — Technical Corrigendum 1
60.60
ISO 10618:1999
Carbon fibre — Determination of tensile properties of resin-impregnated yarn
95.99
ISO 10618:2004
Carbon fibre — Determination of tensile properties of resin-impregnated yarn
90.93
ISO 11566:1996
Carbon fibre — Determination of the tensile properties of single-filament specimens
90.93
ISO 11567:1995
Carbon fibre — Determination of filament diameter and cross-sectional area
95.99
ISO 11567:2018
Carbon fibre — Determination of filament diameter and cross-sectional area
60.60
ISO 11667:1997
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods
90.93
ISO 12114:1997
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of cure characteristics
90.93
ISO 12115:1997
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of flowability, maturation and shelf life
90.93
ISO 12115:1997/Cor 1:1998
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of flowability, maturation and shelf life — Technical Corrigendum 1
60.60
ISO 12815:2013
Fibre-reinforced plastic composites — Determination of plain-pin bearing strength
90.93
ISO 12817:2013
Fibre-reinforced plastic composites — Determination of open-hole compression strength
90.93
ISO 13002:1998
Carbon fibre — Designation system for filament yarns
90.93
ISO 13003:2003
Fibre-reinforced plastics — Determination of fatigue properties under cyclic loading conditions
90.93
ISO/TR 13883:1995
Plastics — Guide to the writing of test methods
90.93
ISO 13931:2013
Carbon fibre — Determination of volume resistivity
90.93
ISO 14125:1998
Fibre-reinforced plastic composites — Determination of flexural properties
90.60
ISO 14125:1998/Amd 1:2011
Fibre-reinforced plastic composites — Determination of flexural properties — Amendment 1
60.60
ISO 14125:1998/Cor 1:2001
Fibre-reinforced plastic composites — Determination of flexural properties — Technical Corrigendum 1
60.60
ISO 14126:1999
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
90.60
ISO 14126:1999/Cor 1:2001
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction — Technical Corrigendum 1
60.60
ISO 14127:2008
Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
90.93
ISO 14129:1997
Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
90.93
ISO 14130:1997
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method
90.93
ISO 14130:1997/Cor 1:2003
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method — Technical Corrigendum 1
60.60
ISO 15024:2001
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
90.93
ISO 15034:1999
Composites — Prepregs — Determination of resin flow
90.20
ISO 15039:2003
Textile-glass rovings — Determination of solubility of size
90.93
ISO 15039:2003/Amd 1:2015
Textile-glass rovings — Determination of solubility of size — Amendment 1
60.60
ISO 15040:1999
Composites — Prepregs — Determination of gel time
90.20
ISO 15100:2000
Plastics — Reinforcement fibres — Chopped strands — Determination of bulk density
90.93
ISO 15114:2014
Fibre-reinforced plastic composites — Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach
90.93
ISO 15310:1999
Fibre-reinforced plastic composites — Determination of the in-plane shear modulus by the plate twist method
90.93
ISO 17771:2003
Plastics — Thermoset moulding compounds — Determination of the degree of fibre wetting in SMC
90.93
ISO 18352:2009
Carbon-fibre-reinforced plastics — Determination of compression-after-impact properties at a specified impact-energy level
90.93
ISO 19927:2018
Fibre-reinforced plastic composites — Determination of interlaminar strength and modulus by double beam shear test
60.60
ISO 20144:2019
Fibre-reinforced plastic composites — Standard qualification plan (SQP) for composite materials, including reduced qualification plan (RQP) and extended qualification plan (EQP) schemes
60.60
ISO 20337:2018
Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
60.60
ISO 20975-2:2018
Fibre-reinforced plastic compositess — Determination of laminate through-thickness properties — Part 2: Determination of the elastic modulus, the strength and the Weibull size effects by flexural test of unidirectional laminate, for carbon-fibre based systems
60.60
ISO/NP 20975-1
Carbon fibre-reinforced plastics — Methods for measurement of through-thickness laminate properties — Part 1: Direct tension and compression
10.99
ISO 21746:2019
Composites and metal assemblies — Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres — Salt spray tests
60.60
ISO 22314:2006
Plastics — Glass-fibre-reinforced products — Determination of fibre length
90.93
ISO/DIS 22821
Carbon-fibre-reinforced composites — Determination of fibre wight content — By thermograrvimetry (TG)
40.60
ISO/DIS 22836
Carbon fibre-reinforced composites — Method for accelerated moisture absorption and supersaturated conditioning by moisture using sealed pressure vessel
40.60
ISO/DIS 22838
Composites and reinforcements fibres — Determination of the fracture toughness of bonded plates of carbon fibre reinforced plastics (CFRPs) and metal using double cantilever beam specimens
40.60
ISO/DIS 22841
Composites and reinforcements fibres — Carbon fibre reinforced plastics(CFRPs) and metal assemblies — Determination of the tensile lap-shear strength
40.60
ISO/CD 23483
Carbon fibres — Determination of PAN-based carbon fibre tow characteristics — Thermal conductivity
30.60
ISO/WD 24360
Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Determination of the cross tension strength
20.00
ISO 30012:2016
Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects
60.60
ISO 30012:2016/Amd 1:2018
Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects — Amendment 1
60.60

No matching records found. Please try changing the filter settings.