Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod

Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method

Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method

Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method

Plastics — Determination of temperature of evolution of flammable gases (decomposition temperature) from a small sample of pulverized material

Plastics — Determination of ignition temperature using a hot-air furnace

Plastics — Determination of ignition temperature using a hot-air furnace

Plastics — Determination of ignition temperature using a hot-air furnace

Textile glass reinforced plastics — Determination of loss on ignition

Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame

Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source

Plastics — Determination of flammability and burning rate of plastics in the form of film

Light measuring system for smoke emission testing

Cellular plastic and cellular rubber materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame

Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame

Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1

Road vehicles — Determination of burning behaviour of interior materials for motor vehicles

Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials

Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance

Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test — Amendment 1

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 4: High gas velocity test

Plastics — Determination of flammability by oxygen index

Burning behaviour of textiles and textile products — Vocabulary

Burning behaviour of textiles and textile products — Vocabulary

Burning behaviour of textiles and textile products — Vocabulary — Amendment 1

Burning behaviour of textiles and textile products — Vocabulary — Amendment 2

Burning behaviour of textiles and textile products — Vocabulary

Plastics — Smoke generation — Part 1: Guidance on optical-density testing

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test — Technical Corrigendum 1

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method

Plastics — Smoke generation — Determination of optical density by a single-chamber test

Evaluation of physical parameters of filter paper substrates for the determination of the ignition propensity of cigarettes

Fire hazard and the design and use of fire tests

Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens

Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens — Amendment 1

Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens

Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens

Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens

Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens — Amendment 1

Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens

Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens

Wheelchairs — Part 16: Resistance to ignition of upholstered parts — Requirements and test methods

Wheelchairs — Part 16: Resistance to ignition of postural support devices

Rubber and plastics hoses for underground mining — Method of test for flammability

Rubber and plastics hoses — Method of test for flammability

Rubber and plastics hoses — Method of test for flammability

Furniture — Assessment of the ignitability of upholstered furniture — Part 1: Ignition source: smouldering cigarette

Furniture — Assessment of ignitability of upholstered furniture — Part 2: Ignition source: match-flame equivalent

Test for sustained combustibility of liquids

Paints and varnishes — Determination of the ability of liquid paints to sustain combustion

Determination of sustained combustibility of liquids

Determination of sustained combustibility of liquids

Determination of sustained combustibility of liquids

Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source

Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 1

Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 2

Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source

Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source

Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source

Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2

Textiles — Design of apparel for reduced fire hazard

Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame

Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame

Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1: Specimens

Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame

Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame

Plastics — Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source

Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source — Amendment 1: Specimens

Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small flame ignition source

Textiles — Determination of surface burning time of fabrics

Textiles — Determination of surface burning time of fabrics

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources — Technical Corrigendum 1

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Determination of the combustibility of specimens using a 125 mm flame source

Plastics — Survey of ignition sources used for national and international fire tests

Textiles — Commercial laundering procedure for textile fabrics prior to flammability testing

Plastics — Guidance for the use of standard fire tests

Plastics — Burning behaviour — Guidance for development and use of fire tests

Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1

Plastics — Guidance for the use of standard fire tests

Plastics — Specifications and guidance for the use of standard fire tests

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: Guidance

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 3: Dynamic decomposition method using a travelling furnace

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater

Reaction to fire tests — Measurement of material properties using a fire propagation apparatus

Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing

Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing

Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 1: Loadbearing elements and vertical and horizontal separating elements

Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 2: Non-loadbearing elements

Fire-resistance tests — Guidance on the application and extension of results

Standard test method for assessing the ignition propensity of cigarettes

Standard test method for assessing the ignition propensity of cigarettes — Amendment 1

Standard test method for assessing the ignition propensity of cigarettes — Technical Corrigendum 1

Standard test method for assessing the ignition propensity of cigarettes

Textiles — Burning behaviour of bedding items — Part 1: General test methods for the ignitability by a smouldering cigarette

Textiles — Assessment of the ignitability of bedding items — Part 1: Ignition source: smouldering cigarette

Textiles — Burning behaviour of bedding items — Part 2: Specific test methods for the ignitability by a smouldering cigarette

Textiles — Assessment of the ignitability of bedding items — Part 2: Ignition source: match-flame equivalent

Textiles — Burning behaviour of bedding items — Part 3: General test methods fot the ignitability by a small open flame

Textiles — Burning behaviour of bedding items — Part 4: Specific test methods for the ignitability by a small open flame

Plastics — Vertical flame spread determination for film and sheet

Plastics — Vertical flame spread determination for film and sheet

Rubber and plastics hoses for fuels for internal-combustion engines — Method of test for flammability

Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials

Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials

Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials

Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials

Space systems — Safety and compatibility of materials — Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments

Reaction-to-fire tests — Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)

Reaction to fire tests — Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)

Fire tests — Calibration and use of heat flux meters — Part 1: General principles

Fire tests — Calibration and use of radiometers and heat flux meters — Part 1: General principles

Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods

Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods

Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method

Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method

Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests

Fire tests — Calibration of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests

Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 1: Spray flame persistence — Hollow-cone nozzle method

Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilised flame heat release method

Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilized flame heat release method

Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design

Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products

Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 1: Ignition source: smouldering cigarette

Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 2: Ignition source: match flame equivalent

Space systems — Safety and compatibility of materials - Method to determine the flammability thresholds of materials

Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering

Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering

Fire tests— Reduced-scale model box test

Reaction to fire tests — Mass loss measurement

Reaction to fire tests — Mass loss measurement

Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy

Fire tests — Use of LED (light-emitting diode) as an alternative to white light for measuring smoke parameters

Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens

Plastics — Impinging flame test on water-filled plastic pipes

Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter

Plastics — Application of spread of flame test to plastic pipes

Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW

Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites

Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites

Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods

Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods

Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods — Amendment 1

Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods — Amendment 1