Withdrawal of ISO/R 91-1970

Paints, varnishes, petroleum and related products — Flash/no flash test — Closed cup equilibrium method

Determination of flash/no flash — Closed cup equilibrium method

Paints, varnishes, petroleum and related products — Determination of flashpoint — Closed cup equilibrium method

Determination of flash point — Closed cup equilibrium method

Petroleum industry — Vocabulary

Petroleum industry — Terminology — Part 1: Raw materials and products

Petroleum industry — Terminology — Part 1: Raw materials and products — Technical Corrigendum 1

Petroleum industry — Vocabulary

Petroleum industry — Terminology — Part 2: Properties and tests

Petroleum industry — Terminology — Part 3: Exploration and production

Petroleum industry — Terminology — Part 4: Refining

Petroleum industry — Terminology — Part 5: Transport, storage, distribution

Petroleum industry — Terminology — Part 5: Transport, storage, distribution — Technical Corrigendum 1

Petroleum industry — Terminology — Part 6: Measurement

Petroleum industry — Terminology — Part 7: Miscellaneous terms

Petroleum industry — Terminology — Part 99: General and index

Petroleum products — Determination of colour

Petroleum products — Determination of colour (ASTM scale)

Gasoline — Determination of lead content — Volumetric chromate method

Petroleum products — Lubricating grease — Determination of cone penetration

Petroleum products — Lubricating grease and petrolatum — Determination of cone penetration

Petroleum products and lubricants — Determination of cone penetration of lubricating greases and petrolatum

Petroleum products and lubricants — Determination of cone penetration of lubricating greases and petrolatum

Petroleum products — Corrosiveness to copper — Copper strip test

Petroleum products — Corrosiveness to copper — Copper strip test

Petroleum products — Corrosiveness to copper — Copper strip test — Technical Corrigendum 1

Petroleum products — Corrosiveness to copper — Copper strip test

Petroleum products — Lubricating grease — Determination of dropping point

Petroleum products — Lubricating grease — Determination of dropping point

Petroleum products — Lubricating grease — Determination of dropping point — Amendment 1

Petroleum products — Lubricating grease — Determination of dropping point — Technical Corrigendum 1

Petroleum products — Determination of total sulfur content — Lamp method

Petroleum waxes — Determination of congealing point

Petroleum products — Determination of flash and fire points — Cleveland open cup method

Determination of flash and fire points — Cleveland open cup method

Petroleum and related products — Determination of flash and fire points — Cleveland open cup method

Petroleum products — Determination of flash point — Pensky-Martens closed cup method

Petroleum products and lubricants — Determination of flash point — Pensky-Martens closed cup method

Determination of flash point — Pensky-Martens closed cup method

Determination of flash point — Pensky-Martens closed cup method

Determination of flash point — Pensky-Martens closed cup method — Amendment 1: Thermometers correction

Petroleum waxes — Determination of oil content

Petroleum products — Calculation of viscosity index from kinematic viscosity

Petroleum products — Calculation of viscosity index from kinematic viscosity

Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point

Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point

Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point — Technical Corrigendum 1

Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point

Petroleum products — Determination of vapour pressure — Reid method

Petroleum products — Determination of vapour pressure — Reid method

Petroleum products and crude petroleum — Determination of vapour pressure — Reid method

Aviation turbine fuels — Determination of mercaptan sulphur — Amperometric and potentiometric methods

Gasoline, kerosine and distillate fuels — Determination of mercaptan sulfur — Potentiometric method

Petroleum products — Determination of thiol (mercaptan) sulfur in light and middle distillate fuels — Potentiometric method

Aviation fuels — Determination of freezing point

Petroleum products — Determination of the freezing point of aviation fuels

Aviation turbine fuels — Determination of smoke point

Petroleum products — Determination of the smoke point of kerosine

Petroleum oils — Determination of cloud point

Petroleum products — Determination of cloud point

Petroleum and related products from natural or synthetic sources — Determination of cloud point

Petroleum oils — Determination of pour point

Petroleum products — Determination of pour point

Petroleum and related products from natural or synthetic sources — Determination of pour point

Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity

Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity

Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity — Technical Corrigendum 1

Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity

Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity

Glass capillary kinematic viscometers — Specification and operating instructions

Glass capillary kinematic viscometers — Specifications and operating instructions

Petroleum products — Liquid hydrocarbons — Manual sampling

Petroleum products — Liquid hydrocarbons — Automatic pipeline sampling

Petroleum products — Determination of distillation characteristics

Petroleum products — Determination of distillation characteristics

Petroleum products — Determination of distillation characteristics at atmospheric pressure

Petroleum products — Determination of distillation characteristics at atmospheric pressure

Petroleum and related products from natural or synthetic sources — Determination of distillation characteristics at atmospheric pressure

Industrial liquid lubricants — ISO viscosity classification

Industrial liquid lubricants — ISO viscosity classification

Industrial liquid lubricants — ISO viscosity classification — Technical Corrigendum 1

Lubricants for machine tools — Classification

Aviation fuels — Estimation of specific energy

Aviation fuels — Estimation of net specific energy

Aviation fuels — Estimation of net specific energy — Technical Corrigendum 1

Viscosity of water

Viscosity of water

Crude petroleum and liquid petroleum products — Laboratory determination of density or relative density — Hydrometer method

Paints, varnishes, petroleum and related products — Determination of flashpoint — Rapid equilibrium method

Determination of flash point — Rapid equilibrium closed cup method

Determination of flash no-flash and flash point — Rapid equilibrium closed cup method

Determination of flash point – Method for flash no-flash and flash point by small scale closed cup tester

Paints, varnishes, petroleum and related products — Flash/no flash test — Rapid equilibrium method

Determination of flash/no flash — Rapid equilibrium closed cup method

Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method

Crude petroleum and fuel oils — Determination of sediment — Extraction method

Petroleum products — Total base number — Perchloric acid potentiometric titration method

Petroleum products — Determination of base number — Perchloric acid potentiometric titration method

Petroleum products — Determination of base number — Perchloric acid potentiometric titration method

Petroleum products — Gasoline — Determination of lead content — Iodine monochloride method

Petroleum products — Determination of lead content of gasoline — Iodine monochloride method

Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method

Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method — Amendment 1

Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method — Technical Corrigendum 1

Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method — Technical Corrigendum 2

Petroleum distillates and commercial aliphatic olefins — Determination of bromine number — Electrometric method

Petroleum products — Determination of bromine number of distillates and aliphatic olefins — Electrometric method

Petroleum products — Determination of bromine number of distillates and aliphatic olefins — Electrometric method — Amendment 1

Petroleum distillates — Determination of olefinic plus aromatic hydrocarbons content

Petroleum waxes — Determination of melting point (cooling curve)

Petroleum products — Determination of boiling range distribution — Gas chromatography method

Petroleum products — Determination of boiling range distribution — Gas chromatography method

Petroleum products — Determination of boiling range distribution — Gas chromatography method

Petroleum products — Determination of boiling range distribution — Gas chromatography method

Petroleum products — Determination of boiling range distribution — Gas chromatography method

Petroleum products — Lubricating oils and additives — Determination of sulphated ash

Petroleum products — Lubricating oils and additives — Determination of sulfated ash

Petroleum products — Determination of sulfated ash in lubricating oils and additives

Petroleum products — Determination of sulfated ash in lubricating oils and additives — Technical Corrigendum 1

Liquefied petroleum gases — Determination of vapour pressure — LPG method

Liquefied petroleum gases — Determination of gauge vapour pressure — LPG method

Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test

Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test — Amendment 1

Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test — Amendment 2

Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test

Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test — Amendment 1

Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test

Petroleum and related products — Precision of measurement methods and results — Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory

Petroleum and related products — Precision of measurement methods and results — Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property

Petroleum products — Determination and application of precision data in relation to methods of test

Petroleum products — Determination and application of precision data in relation to methods of test

Petroleum products — Determination and application of precision data in relation to methods of test — Technical Corrigendum 1

Petroleum products — Determination and application of precision data in relation to methods of test

Petroleum products and hydrocarbons — Determination of sulfur content — Wickbold combustion method

Petroleum products — Determination of carbon residue — Ramsbottom method

Petroleum products — Determination of carbon residue — Ramsbottom method

Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids — TOST test — Part 1: Procedure for mineral oils

Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids — TOST test — Part 2: Procedure for category HFC hydraulic fluids

Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids — TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids

Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids

Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids

Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids — TOST test — Part 4: Procedure for industrial gear oils

Petroleum products — Inhibited mineral oils — Determination of oxidation characteristics

Petroleum products — Calculation of cetane index of middle-distillate fuels by the four-variable equation

Petroleum products — Calculation of cetane index of middle-distillate fuels by the four-variable equation

Petroleum products — Calculation of cetane index of middle-distillate fuels by the four-variable equation — Amendment 1

Petroleum products — Calculation of cetane index of middle-distillate fuels by the four variable equation

Petroleum products — Lubricating oils and additives — Determination of phosphorus content — Quinoline phosphomolybdate method

Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids

Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids

Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 2: Non-aqueous fluids

Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 2: Non-aqueous fluids

Petroleum and related products — Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems

Petroleum liquids and gases — Measurement — Standard reference conditions

Motor and aviation-type fuels — Determination of knock characteristics — Motor method

Motor and aviation-type fuels — Determination of knock characteristics — Motor method

Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method

Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method — Technical Corrigendum 1

Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method

Motor fuels — Determination of knock characteristics — Research method

Motor fuels — Determination of knock characteristics — Research method

Petroleum products — Determination of knock characteristics of motor fuels — Research method

Petroleum products — Determination of knock characteristics of motor fuels — Research method

Diesel fuels — Determination of ignition quality — Cetane method

Diesel fuels — Determination of ignition quality — Cetane method

Petroleum products — Determination of the ignition quality of diesel fuels — Cetane engine method

Petroleum products — Determination of the ignition quality of diesel fuels — Cetane engine method

Petroleum products — Determination of the ignition quality of diesel fuels — Cetane engine method

Aromatic hydrocarbons — Test for presence of mercaptans (thiols) — Doctor test

Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species — Doctor test

Petroleum products — Hydrocarbon liquids — Determination of refractive index

Petroleum products — Electrical insulating oils — Detection of corrosive sulphur

Petroleum products — Electrical insulating oils — Detection of corrosive sulfur

Hydraulic fluid power — Petroleum fluids — Prediction of bulk moduli

Petroleum products — Prediction of the bulk moduli of petroleum fluids used in hydraulic power systems

Petroleum waxes and petrolatums — Determination of drop melting point

Petroleum products — Determination of ash

Petroleum products — Determination of ash

Petroleum products — Determination of ash

Petroleum products — Motor gasoline and aviation fuels — Determination of existent gum — Jet evaporation method

Petroleum products — Gum content of light and middle distillate fuels — Jet evaporation method

Petroleum products — Gum content of light and middle distillate fuels — Jet evaporation method — Technical Corrigendum 1

Petroleum products — Gum content of fuels — Jet evaporation method

Petroleum products — Gum content of fuels — Jet evaporation method — Amendment 1: Purity requirement for n-heptane

Petroleum products — Determination of foaming characteristics of lubricating oils

Petroleum products — Determination of foaming characteristics of lubricating oils — Technical Corrigendum 1

Petroleum products — Gas turbine fuels — Determination of thermal oxidation stability — JFTOT method

Petroleum products — Determination of thermal oxidation stability of gas turbine fuels — JFTOT method

Petroleum products — Determination of thermal oxidation stability of gas turbine fuels

Aviation fuels — Determination of water reaction

Petroleum products — Determination of the water reaction of aviation fuels

Liquefied petroleum gases — Corrosiveness to copper — Copper strip test

Liquefied petroleum gases — Corrosiveness to copper — Copper strip test

Petroleum products — Determination of saponification number — Part 1: Colour-indicator titration method

Petroleum products — Determination of saponification number — Part 2: Potentiometric titration method

Petroleum products — Determination of saponification number

Petroleum products — Mineral oils — Determination of interfacial tension of oil against water — Ring method

Petroleum products — Aviation and distillate fuels containing a static dissipator additive — Determination of electrical conductivity

Petroleum products — Aviation and distillate fuels — Determination of electrical conductivity

Petroleum products — Determination of dropping point of lubricating greases (wide temperature range)

Petroleum oils and synthetic fluids — Determination of demulsibility characteristics

Petroleum products — Determination of water separability of petroleum oils and synthetic fluids

Petroleum products — Determination of water separability of petroleum oils and synthetic fluids — Amendment 1

Petroleum products — Determination of carbon residue — Conradson method

Petroleum products — Determination of carbon residue — Conradson method

Petroleum-based lubricating oils — Aging characteristics — Determination of change in Conradson carbon residue after oxidation

Petroleum products and lubricants — Neutralization number — Colour-indicator titration method

Petroleum products and lubricants — Determination of acid or base number — Colour-indicator titration method

Petroleum products and lubricants — Determination of acid or base number — Colour-indicator titration method — Technical Corrigendum 1

Petroleum products and lubricants — Neutralization number — Potentiometric titration method

Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water

Petroleum products — Determination of oxidation stability of gasoline — Induction period method

Petroleum products — Determination of oxidation stability of gasoline — Induction period method

Petroleum products — Determination of total acid number — Semi-micro colour-indicator titration method

Petroleum products — Determination of acid number — Semi-micro colour-indicator titration method

Petroleum products and lubricants — Inhibited mineral turbine oils — Determination of oxidation stability

Commercial propane and butane — Analysis by gas chromatography

Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing

Petroleum products — Determination of sulfur content — Energy-dispersive X-ray fluorescence method

Petroleum products — Determination of sulfur content — Energy-dispersive X-ray fluorescence spectrometry

Liquified petroleum gases — Detection of hydrogen sulfide — Lead acetate method

Liquefied petroleum gases — Detection of hydrogen sulfide — Lead acetate method

Liquefied petroleum gases — Calculation method for density and vapour pressure

Liquefied petroleum gases — Calculation method for density and vapour pressure — Amendment 1

Determination of sustained combustibility of liquids

Determination of sustained combustibility of liquids

Crude petroleum — Determination of water content by hydride reaction — Field method

Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method

Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method — Amendment 1

Industrial quenching oils — Determination of cooling characteristics — Nickel-alloy probe test method

Petroleum products — Total sediment in residual fuel oils — Part 1: Determination by hot filtration

Petroleum products — Total sediment in residual fuel oils — Part 1: Determination by hot filtration — Technical Corrigendum 1

Petroleum products — Total sediment in residual fuel oils — Part 1: Determination by hot filtration

Petroleum products — Total sediment in residual fuel oils — Part 2: Determination using standard procedures for ageing

Petroleum products — Total sediment in residual fuel oils — Part 2: Determination using standard procedures for ageing

Petroleum products — Total sediment in residual fuel oils — Part 2: Determination using standard procedures for ageing — Technical Corrigendum 1

Petroleum products — Determination of carbon residue — Micro method

Petroleum products — Determination of carbon residue — Micro method — Technical Corrigendum 1

Petroleum products — Determination of carbon residue — Micro method

Petroleum products — Determination of aluminium and silicon in fuel oils — Inductively coupled plasma emission and atomic absorption spectroscopy methods

Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 1: Dynamic wet conditions

Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 2: Method with water wash-out

Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases

Petroleum products and lubricants — Determination of water washout characteristics of lubricating greases

Petroleum products and lubricants — Determination of water washout characteristics of lubricating greases

Petroleum and liquid petroleum products — Direct static measurements — Contents of vertical storage tanks — Part 1: Mass measurement by hydrostatic tank gauging

Lubricants, industrial oils and related products — Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig — Flender foam test procedure

Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method

Petroleum products — Determination of the oxidation stability of middle-distillate fuels

Petroleum products and related products — Determination of the mechanical stability of greases in presence of water

Petroleum products and related products --Determination of roll stability of lubricating grease — Part 1: Dry condition test

Petroleum products and related products --Determination of roll stability of lubricating grease — Part 2: Wet condition test

Petroleum products — Determination of low concentration of sulfur in automotive fuels — Energy-dispersive X-ray fluorescence spectrometric method

Petroleum products and lubricants — Rheological properties of lubricating greases — Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system

Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water

Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water

Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils

Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils

Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils

Petroleum products and lubricants — Rheological properties of lubricating greases — Determination of the consistency of metal-saponified greases by an oscillatory rheometer with a cone/plate measuring system

Petroleum products and other liquids — Determination of flash point — Abel closed cup method

Determination of flash point — Abel closed-cup method

Determination of flash point — Abel closed-cup method

Determination of flash point — Abel closed-cup method

Determination of flash point — Abel closed-cup method — Amendment 1: Bias statement update

Petroleum products and lubricants — Determination of low-temperature cone penetration of lubricating greases

Liquefied petroleum gases — Determination of oily residues — High-temperature method

Liquefied petroleum gases — Assessment of the dryness of propane — Valve freeze method

Liquefied petroleum gases — Assessment of the dryness of propane — Valve freeze method — Amendment 1

Petroleum products — Determination of alkyl nitrate in diesel fuels — Spectrometric method

Petroleum and related products — Determination of arsenic content in crude oil using atomic fluorescence spectrometry

Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry

Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry — Technical Corrigendum 1

Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry

Petroleum products — Determination of vanadium and nickel content — Wavelength-dispersive X-ray fluorescence spectrometry

Petroleum and related products — Determination of wick flame persistence of fire-resistant fluids

Petroleum and related products — Determination of wick flame persistence of fire-resistant fluids

Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 1: Spray flame persistence — Hollow-cone nozzle method

Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilised flame heat release method

Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilized flame heat release method

Petroleum products — Determination of particulate content of middle distillate fuels — Laboratory filtration method

Petroleum and related products — Determination of chlorine and bromine content — Wavelength-dispersive X-ray fluorescence spectrometry

Petroleum products — Estimation of net specific energy of aviation turbine fuels using hydrogen content data

Petroleum products — Determination of sulfur content — Oxidative microcoulometry method

Petroleum and related products — Determination of anti-aging for phosphate ester turbine control fluids — Closed cup method

Petroleum products — Calculation of specific energy of residual fuels from physical and compositional properties — Basic data

Lubricants — Determination of tribological quantities for oils and greases — Tribological test in the translatory oscillation apparatus

Petroleum products — Density versus temperature relationships of current fuels, biofuels and biofuel components

Petroleum products — Equivalency of test method determining the same property — Part 1: Atmospheric distillation of petroleum products

Petroleum products — Equivalency of test method determining the same property — Part 2: Density of petroleum products

Petroleum products — Equivalency of test method determining the same property — Part 100: Background and principle of the comparison and the evaluation of equivalency

Petroleum and related products — Determination of the extreme-pressure and anti-wear properties of fluids — Four ball method (European conditions)

Petroleum and related products — Determination of the extreme-pressure and anti-wear properties of lubricants — Four-ball method (European conditions)

Petroleum and related products — Determination of anti-wear properties of hydraulic fluids — Vane pump method

Petroleum and related products — Preparation of a test portion of high-boiling liquids for the determination of water content — Nitrogen purge method

Petroleum and related products — Determination of emulsion stability of fire-resistant fluids — Part 1: Fluids in category HFAE

Petroleum and related products — Determination of emulsion stability of fire-resistant fluids — Part 1: Fluids in category HFAE

Petroleum and related products — Determination of emulsion stability of fire-resistant fluids — Part 2: Fluids in category HFB

Petroleum and related products — Determination of the flammability characteristics of fluids in contact with hot surfaces — Manifold ignition test

Petroleum and related products — Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC

Petroleum and related products — Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC

Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle

Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle

Petroleum products — Determination of sulfur content of automotive fuels — Ultraviolet fluorescence method

Petroleum products — Determination of sulfur content of automotive fuels — Ultraviolet fluorescence method

Petroleum products — Determination of sulfur content of automotive fuels — Ultraviolet fluorescence method

Petroleum products — Determination of sulfur content of automotive fuels — Energy-dispersive X-ray fluorescence spectrometry

Petroleum products — Determination of sulfur content of automotive fuels — Wavelength-dispersive X-ray fluorescence spectrometry

Petroleum products — Determination of sulfur content of automotive fuels — Wavelength-dispersive X-ray fluorescence spectrometry

Petroleum products — Determination of sulfur content of automotive fuels — Wavelength-dispersive X-ray fluorescence spectrometry

Petroleum products — Determination of sulfur content of automotive fuels — Wavelength-dispersive X-ray fluorescence spectrometry — Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of Table 1

Petroleum products — Determination of turbidity point and aniline point equivalent

Refrigerated hydrocarbon fluids — Dynamic measurement — Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids

Petroleum products and lubricants — Determination of oil separation from grease — Pressure filtration method

Petroleum products and lubricants - Determination of the dropping point of grease with an automatic apparatus

Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor gasoline — Multidimensional gas chromatography method

Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel — Multidimensional gas chromatography method

Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel — Multidimensional gas chromatography method

Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel — Multidimensional gas chromatography method

Petroleum products — Determination of cloud point — Automated step-wise cooling method

Petroleum products — Lubricating greases — Sampling of greases

Petroleum products and related products ― Determination of dynamic viscosity and calculation of kinematic viscosity ― Method by Stabinger type viscosimeter

Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer

Petroleum and related products from natural or synthetic sources — Determination of pour point — Part 1: Automated step-wise cooling method

Petroleum and related products from natural or synthetic sources - Determination of pour point — Part 2: Automated linear cooling method

Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing

Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing

Petroleum products and other liquids — Guidance for flash point testing

Petroleum products and other liquids — Guidance for flash point and combustibility testing