ISO/DIS 18335

Тезис

Scope of the proposed deliverable This document specifies a procedure for the determination of dynamic viscosity (η) and density (ρ) for the calculation of kinematic viscosity (ν) of middle distillate fuels, fatty acid methyl ester fuels (FAME) and mixtures of these with middle distillate fuels, and lubricating oils including base oils, formulated oils, and synthetics, using a constant pressure viscometer. The range of kinematic viscosities covered in this test method is from 0,5 mm2/s to 2 000 mm2/s, with precision at 40 °C from 0,9 mm2/s to 1 300 mm2/s, and precision at 100 °C from 2.9 mm2/s to 161 mm2/s. The result obtained using the procedure described in this document depends on the rheological behaviour of the sample. This document is predominantly applicable to liquids whose shear stress and shear rate are proportional (Newtonian flow behaviour). However, if the viscosity changes significantly with the shear rate, comparison with other measuring methods is only permissible at similar shear rates

Общая информация

Текущий статус
: Under development

You can help develop this draft international standard by contacting your national member
Версия
: 1
Технический комитет
: ISO/TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources
ICS
:
75.080 Petroleum products in general

Данный стандарт разработан для достижения следующих Цель устойчивого развития:

Недорогостоящая и чистая энергия

Приобрести данный стандарт

	Формат	Язык
std 1 61	PDF
std 2 61	Бумажный

CHF61

Жизненный цикл

Сейчас

Under development

ISO/DIS 18335
Этап: 40.20

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами

+41 22 749 08 88

customerservice@iso.org

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)

Будьте в курсе актуальных новостей ИСО

Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах.

недоступно на русском языке