International Standard
ISO 30011:2025
Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
Reference number
ISO 30011:2025
Edition 2
2025-08
© ISO 2026
Preview
недоступно на русском языке
Опубликовано (Версия 2, 2025)

ISO 30011:2025

Язык
Формат
CHF 159
* Pасходы на перевозку должны оплачиваться
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document specifies a procedure for the use of quadrupole inductively coupled plasma mass spectrometry (ICP-MS), including single-quadrupole instruments and tandem ICP-MS/MS, for analysing test solutions prepared from samples of airborne particulate matter collected as specified in ISO 15202-1. Method development, performance checks and a routine analysis method are specified in this document

NOTE 1        Other types of ICP-MS (e.g. magnetic sector) are outside of the scope of this document.

Test solutions for analysis by this document are prepared as specified in ISO 15202-2.

This document is applicable to the assessment of workplace exposure to metals and metalloids for comparison with limit values (e.g. see EN 689[10] and ASTM E1370[8]).

This document is not applicable to the determination of elemental mercury, since mercury vapour is not collected using the sampling method specified in ISO 15202-1.

The procedure specified in this document is suitable for the assessment of exposure against the long-term exposure limits for most of the metals and metalloids for which occupational exposure limit values have been set, when sampling at a typical flow rate of at least 2 l min−1 for sampling times in the range 0,25 h to 8 h and for the assessment of exposure against the short-term exposure limits, where applicable.

NOTE 2        The procedure is subject to no significant spectral interferences (see Clause A.3), provided that suitable analytical isotopes are used. However, inadequate matrix-matching can adversely affect results.

Общая информация

  • Текущий статус
     : Опубликовано
    Дата публикации
     : 2025-08
    Этап
    : Опубликование международного стандарта [60.60]
  • Версия
     : 2
  • Технический комитет :
    ISO/TC 146/SC 2
    ICS :
    13.040.30 
  • RSS обновления

Жизненный цикл

Цели в области устойчивого развития

Данный стандарт разработан для достижения следующих Цели в области устойчивого развития

3
Хорошее здоровье и благополучие
8
Достойная работа и экономический рост

Появились вопросы?

Ознакомьтесь с FAQ

  2. Интернет-магазин
  3. Интернет-магазин
  4. МКС
  5. 13
  6. 13.040
  7. 13.040.30
  8. ISO 30011:2025