Тезис 

ISO/TS 10303-1828:2018-11 specifies the application module for Wiring harness assembly design.

The following are within the scope of ISO/TS 10303-1828:2018-11:

  • electrical definition of a wiring harness;
  • wire-list for an wiring harness assembly, consisting of:
    • wires and cables;
    • terminal lug;
    • terminal block;
    • electrically non conductive through termination;
    • wire cap;
    • single and multi pin connector contact;
    • splice definitions within the harness assembly;
    • electrical shielding definition in the assembly.
  • component-list for an wiring harness assembly, consisting of:
    • connector and associated material;
    • terminal lug;
    • terminal block;
    • electrically non conductive through termination;
    • wire cap;
    • single and multi pin connector contact;
    • splice definitions within the harness assembly;
    • electrical shielding definition in the assembly;
    • tape marking.
  • modifications made to the cables and wires to be used in the harness;
  • assembly joints, each of which specify the mechanical connection between two terminals;
  • requirement allocation from the physical connectivity definition to the implementing item in the wire list;
  • assembly_joint that reference an external item;
  • segment topology of an electrical harness;
  • cross section structure of harness segments;
  • marking of harness components and topology segments;
  • protection of harness segments including:
    • grommet;
    • retention clamps;
    • sleeving;
    • overall shielding for one or more harness segments.
  • items within the scope of application module Wire and cable design connectivity, ISO/TS 10303-1845;
  • items within the scope of application module Extruded structure cross section, ISO/TS 10303-1827;
  • items within the scope of application module Edge based topological representation with length, ISO/TS 10303-1830.


Общая информация

  • Текущий статус :  Withdrawn
    Дата публикации : 2018-11
  • Версия : 1
    Число страниц : 11
  • :
    ISO/TC 184/SC 4
    Industrial data
  • 25.040.40
    Industrial process measurement and control

Приобрести данный стандарт

Жизненны цикл

Стандарт, который пересматривается каждые 5 лет



Изменения / Исправления

  • В настоящее время отменен
    ISO/TS 10303-1828:2018
  • Пересмотрен
    ISO/TS 10303-1828:2019

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)

Будьте в курсе актуальных новостей ИСО

Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах