Specifies methods of test for natural and synthetic materials having a molar ratio sodium fluoride/aluminium trifluoride between 3 and 1,7 approximately. The method is applicable to products the phosphorus pentoxide content of which does not exceed 0,02 % (m/m). The procedure consists in alkaline fusion of a test portion by means of a mixture of sodium carbonate and boric acid. Dissolution of the fused mass in excess nitric acid so that the pH value is between 0,7 and 0,9. Formation of the (Yellow) oxidized molybdosilicate under clearly defined conditions of acidity, temperature, time and concentration of reagents. Selective reduction in the presence of tartaric acid and measurement at a wvelength of about 815 nm.
Текущий статус : PublishedДата публикации : 1976-09
Версия : 1
Технический комитет:Materials for the production of primary aluminium
Приобрести данный стандарт