Это стандарт пересмотрен ISO 1268-1:2001 | ISO 1268-2:2001 | ISO 1268-3:2000 | ISO 1268-5:2001 | ISO 1268-6:2002 | ISO 1268-7:2001 | ISO 1268-8:2004 | ISO 1268-9:2003 | ISO 1268-10:2005 | ISO 1268-11:2005
Тезис
Specification of standard procedures for the preparation of test plates for subsequent preparation of test specimens by bonding glass cloth or mats with low pressure thermosetting resins. Three methods are specified: Method A: Glass reinforcement and liquid resin with suitable catalyst or curing agent are moulded in a press mould under appropriate conditions. Method B: Glass reinforced prepregs are moulded in a press at a mould temperature higher than room temperature. Method C: The glass reinforcement is manually laminated with simultaneous impregnation with a resin containing a suitable catalyst or curing agent.
Общая информация
-
Текущий статус : WithdrawnДата публикации : 1974-11
-
Версия : 1
-
- ICS :
-
Reinforced plastics
Жизненный цикл
-
Сейчас
-
Пересмотрен
PublishedISO 1268-1:2001
PublishedISO 1268-2:2001
PublishedISO 1268-3:2000
PublishedISO 1268-5:2001
PublishedISO 1268-6:2002
PublishedISO 1268-7:2001
PublishedISO 1268-8:2004
PublishedISO 1268-9:2003
PublishedISO 1268-10:2005
PublishedISO 1268-11:2005
Появились вопросы?
Ознакомьтесь с FAQ
Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)
Будьте в курсе актуальных новостей ИСО
Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах.