Reference number
ISO 10426-1:2009
International Standard
ISO 10426-1:2009
Petroleum and natural gas industries — Cements and materials for well cementing — Part 1: Specification
Edition 3
2009-12
Preview
ISO 10426-1:2009
46188
недоступно на русском языке
Опубликовано (Версия 3, 2009)
Последний раз этот публикация был пересмотрен в  2022. Поэтому данная версия остается актуальной.

ISO 10426-1:2009

ISO 10426-1:2009
46188
Язык
Формат
CHF 181

Тезис

ISO 10426-1:2009 specifies requirements and gives recommendations for six classes of well cements, including their chemical and physical requirements and procedures for physical testing.

ISO 10426-1:2009 is applicable to well cement classes A, B, C and D, which are the products obtained by grinding Portland cement clinker and, if needed, calcium sulfate as an interground additive. Processing additives can be used in the manufacture of cement of these classes. Suitable set-modifying agents can be interground or blended during manufacture of class D cement.

ISO 10426-1:2009 is also applicable to well cement classes G and H, which are the products obtained by grinding clinker with no additives other than one or more forms of calcium sulfate, water or chemical additives as required for chromium (VI) reduction.

Общая информация

  •  : Опубликовано
     : 2009-12
    : Международный стандарт подлежит пересмотру [90.92]
  •  : 3
  • ISO/TC 67/SC 3
    75.020  91.100.10 
  • RSS обновления

Новая версия в процессе разработки

Draft
International Standard
ISO/DIS 10426-1
Oil and gas industries including lower carbon energy — Cements and materials for well cementing — Part 1: Specification
Reference number
ISO/DIS 10426-1
Edition 1
Проект Международный стандарт

ISO/DIS 10426-1

Oil and gas industries including lower carbon energy — Cements and materials for well cementing

Part 1: Specification

ISO/DIS 10426-1

ISO/DIS 10426-1
94106
Язык
Формат
CHF 67

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ