недоступно на русском языке
The electronic version of this International Standard can be downloaded from the ISO/IEC Information Technology Task Force (ITTF) web site

Тезис Предпросмотр

ISO/IEC 14846:2003 specifies the signalling protocol for the support of the Call Intrusion supplementary service (SS-CI) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN).

SS-CI is a supplementary service which, on request from the calling user, enables the calling user to establish communication with a busy called user by breaking into an established call between the called user and a third user (unwanted user).

The Q reference point is defined in ISO/IEC 11579-1.

Service specifications are produced in three stages and according to the method specified in ETS 300 387. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 14845.

The signalling protocol for SS-CI operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.

ISO/IEC 14846:2003 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-CI and other supplementary services and ANFs.

NOTE Additional interactions that have no impact on the signalling protocol at the Q reference point can be found in the relevant stage 1 specifications.

ISO/IEC 14846:2003 is applicable to PINXs which can interconnect to form a PISN.


Общая информация

  • Текущий статус :  Published
    Дата публикации : 2003-04
  • Версия : 2
    Число страниц : 64
  • :
    ISO/IEC JTC 1/SC 6
    Telecommunications and information exchange between systems
  • 33.040.35
    Telephone networks

Приобрести данный стандарт

Формат Язык
Бумажный
  • CHF178

Жизненны цикл

Стандарт, который пересматривается каждые 5 лет



Изменения / Исправления

  • Ранее
    ISO/IEC 14846:1996
  • Сейчас на стадии пересмотра
    ISO/IEC 14846:2003

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)

Будьте в курсе актуальных новостей ИСО

Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах