Последний раз этот стандарт был пересмотрен в 2016. Поэтому данная версия остается актуальной
Тезис Предпросмотр
This International Standard describes two methods for the determination of free formaldehyde (HCHO) in polymer
dispersions. The procedure has been evaluated using acrylic, acrylonitrile butadiene, carboxylated styrenebutadiene
and vinyl acetate polymer dispersions. Both test methods may also be applicable to polymer dispersions
of other compositions.
Method A is the preferred method for polymer dispersions with a free-formaldehyde content higher than .
Method B is recommended if lower formaldehyde contents have to be determined or arbitration analyses have to be
carried out.
Both methods minimize changes in free-formaldehyde concentration that can result from changes in the physical or
chemical properties of polymer dispersions.
There are no known limitations to these methods when used in the manner described.
Общая информация
-
Текущий статус : PublishedДата публикации : 2001-08
-
Версия : 1
-
- ICS :
-
Thermoplastic materials
Приобрести данный стандарт
Формат | Язык | |
---|---|---|
Бумажный |
- CHF58
Жизненный цикл
Стандарт, который пересматривается каждые 5 лет
Изменения / Исправления
-
Сейчас на стадии пересмотра
ISO 15373:2001
Появились вопросы?
Ознакомьтесь с FAQ
Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)
Будьте в курсе актуальных новостей ИСО
Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах.