Каталог стандартов

ISO/TC 22/SC 33

Vehicle dynamics and chassis components

  • Фильтр:
  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 22/SC 33 Секретариата Этап ICS
ISO 611:2003
Road vehicles -- Braking of automotive vehicles and their trailers -- Vocabulary
90.60
ISO 1728:2006
Road vehicles -- Pneumatic braking connections between motor vehicles and towed vehicles -- Interchangeability
90.60
ISO 3006:2005 [Withdrawn]
Road vehicles -- Passenger car wheels for road use -- Test methods
95.99
ISO 3006:2015
Road vehicles -- Passenger car wheels for road use -- Test methods
60.60
ISO 3583:1984
Road vehicles -- Pressure test connection for compressed-air pneumatic braking equipment
90.60
ISO 3803:1984
Road vehicles -- Hydraulic pressure test connection for braking equipment
90.93
ISO 3871:2000
Road vehicles -- Labelling of containers for petroleum-based or non-petroleum-based brake fluid
90.93
ISO 3888-1:1999 [Withdrawn]
Passenger cars -- Test track for a severe lane-change manoeuvre -- Part 1: Double lane-change
95.99
ISO 3888-1:2018
Passenger cars -- Test track for a severe lane-change manoeuvre -- Part 1: Double lane-change
60.60
ISO 3888-2:2011
Passenger cars -- Test track for a severe lane-change manoeuvre -- Part 2: Obstacle avoidance
90.93
ISO 3894:2005 [Withdrawn]
Road vehicles -- Wheels/rims for commercial vehicles -- Test methods
95.99
ISO 3894:2015
Road vehicles -- Wheels/rims for commercial vehicles -- Test methods
90.92
ISO/NP 3894 [Under development]
Road vehicles -- Wheels/rims for commercial vehicles -- Test methods
10.99
ISO 3911:2004
Wheels and rims for pneumatic tyres -- Vocabulary, designation and marking
90.92
ISO/CD 3911 [Under development]
Wheels and rims for pneumatic tyres -- Vocabulary, designation and marking
30.60
ISO 3996:1995
Road vehicles -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
90.60
ISO 4038:1996
Road vehicles -- Hydraulic braking systems -- Simple flare pipes, tapped holes, male fittings and hose end fittings
90.93
ISO 4039-1:1998
Road vehicles -- Pneumatic braking systems -- Part 1: Pipes, male fittings and tapped holes with facial sealing surface
90.60
ISO 4039-2:1998
Road vehicles -- Pneumatic braking systems -- Part 2: Pipes, male fittings and holes with conical sealing surface
90.60
ISO 4107:2010
Commercial vehicles -- Wheel-hub attachment dimensions
90.92
ISO/NP 4107 [Under development]
Commercial vehicles -- Wheel-hub attachment dimensions
10.99
ISO 4138:2012
Passenger cars -- Steady-state circular driving behaviour -- Open-loop test methods
90.93
ISO 4925:2005
Road vehicles -- Specification of non-petroleum-base brake fluids for hydraulic systems
90.20
ISO 4926:2006
Road vehicles -- Hydraulic braking systems -- Non-petroleum-base reference fluids
90.60
ISO 4927:2005
Road vehicles -- Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.60
ISO 4928:2006
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.60
ISO 4929:1978
Road vehicles -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
90.93
ISO 4930:2006
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
90.60
ISO 6117:2005
Road vehicles -- Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
90.60
ISO 6118:2006
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
90.60
ISO 6119:2006
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.60
ISO 6120:1995
Road vehicles -- Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid
90.93
ISO 6310:2009
Road vehicles -- Brake linings -- Compressive strain test methods
90.92
ISO/NP 6310 [Under development]
Road vehicles -- Brake linings -- Compressive strain test methods
10.99
ISO 6311:1980
Road vehicles -- Brake linings -- Internal shear strength of lining material -- Test procedure
90.60
ISO 6312:2010
Road vehicles -- Brake linings -- Shear test procedure for disc brake pad and drum brake shoe assemblies
90.93
ISO 6313:1980
Road vehicles -- Brake linings -- Effects of heat on dimensions and form of disc brake pads -- Test procedure
90.60
ISO 6314:1980
Road vehicles -- Brake linings -- Resistance to water, saline solution, oil and brake fluid -- Test procedure
90.60
ISO 6315:1980
Road vehicles -- Brake linings -- Seizure to ferrous mating surface due to corrosion -- Test procedure
90.60
ISO 6597:2005
Road vehicles -- Hydraulic braking systems, including those with electronic control functions, for motor vehicles -- Test procedures
90.60
ISO 6786:1980
Road vehicles -- Air braking systems -- Identification of connections on units
90.93
ISO 7141:2005
Road vehicles -- Light alloy wheels -- Impact test
90.92
ISO/NP 7141 [Under development]
Road vehicles -- Light alloy wheels -- Impact test
10.99
ISO 7308:1987
Road vehicles -- Petroleum-based brake-fluid for stored-energy hydraulic brakes
90.93
ISO 7309:1985
Road vehicles -- Hydraulic braking systems -- ISO reference petroleum base fluid
90.93
ISO 7375-1:1986
Road vehicles -- Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles -- Part 1: Dimensions
90.93
ISO 7375-2:1998
Road vehicles -- Coiled tube assemblies for air brake connection between towing and towed vehicles -- Part 2: Performance requirements
90.93
ISO 7401:2011
Road vehicles -- Lateral transient response test methods -- Open-loop test methods
90.93
ISO 7575:1993
Commercial road vehicles -- Flat attachment wheel fixing nuts
90.60
ISO 7628:2010
Road vehicles -- Thermoplastics tubing for air braking systems
90.93
ISO 7629:1987
Road vehicles -- Brake linings -- Disc brake pads -- Evaluation of surface and material flaws after testing
90.60
ISO 7630:1985
Road vehicles -- Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93
ISO 7631:1985
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93
ISO 7632:1985
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93
ISO 7633:1985
Road vehicles -- Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93
ISO 7634:2007
Road vehicles -- Compressed air braking systems for towed vehicles including those with electronic braking control functions -- Test procedures
90.93
ISO 7635:2006
Road vehicles -- Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions -- Test procedures
90.60
ISO 7975:2006 [Withdrawn]
Passenger cars -- Braking in a turn -- Open-loop test method
95.99
ISO 7975:2019
Passenger cars -- Braking in a turn -- Open-loop test method
60.60
ISO 8349:2002
Road vehicles -- Measurement of road surface friction
90.93
ISO 8720:1991
Passenger cars -- Specifications for mechanical jacks
90.93
ISO 8855:2011
Road vehicles -- Vehicle dynamics and road-holding ability -- Vocabulary
90.93
ISO 9128:2006
Road vehicles -- Graphical symbols to designate brake fluid types
90.60
ISO 9815:2010
Road vehicles -- Passenger-car and trailer combinations -- Lateral stability test
90.93
ISO 9816:2006 [Withdrawn]
Passenger cars -- Power-off reaction of a vehicle in a turn -- Open-loop test method
95.99
ISO 9816:2018
Passenger cars -- Power-off reaction of a vehicle in a turn -- Open-loop test method
60.60
ISO 10392:2011
Road vehicles -- Determination of centre of gravity
90.93
ISO 10597:2012
Road vehicles -- Flat attachment fixing nuts for commercial vehicles -- Test methods
90.93
ISO/AWI 11010-1 [Under development]
Passenger cars -- Simulation model taxonomy -- Part 1: Vehicle dynamics maneuver
20.00
ISO 11012:2009
Heavy commercial vehicles and buses -- Open-loop test methods for the quantification of on-centre handling -- Weave test and transition test
90.93
ISO 11026:2010
Heavy commercial vehicles and buses -- Test method for roll stability -- Closing-curve test
90.93
ISO 11157:2005
Road vehicles -- Brake lining assemblies -- Inertia dynamometer test method
90.60
ISO 11530:1993
Road vehicles -- Hydraulic jacks -- Specifications
90.60
ISO 12021:2010
Road vehicles -- Sensitivity to lateral wind -- Open-loop test method using wind generator input
90.93
ISO/NP 12158 [Under development]
Road vehicles -- Braking systems -- Temperature measuring methods
10.99
ISO/PAS 12158:2002
Road vehicles -- Braking systems -- Temperature measuring methods
90.92
ISO 12161:2006
Road vehicles -- Endurance braking systems of motor vehicles and towed vehicles -- Test procedures
90.60
ISO 13486-1:1999
Road vehicles -- Hydraulic braking systems -- Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
90.60
ISO/TR 13487:1997
Braking of road vehicles -- Considerations on the definition of mean fully developed deceleration
90.20
ISO 13674-1:2010
Road vehicles -- Test method for the quantification of on-centre handling -- Part 1: Weave test
90.93
ISO 13674-2:2006 [Withdrawn]
Road vehicles -- Test method for the quantification of on-centre handling -- Part 2: Transition test
95.99
ISO 13674-2:2016
Road vehicles -- Test method for the quantification of on-centre handling -- Part 2: Transition test
60.60
ISO 13988:2008
Passenger vehicle wheels -- Clip balance weight and rim flange nomenclature, test procedures and performance requirements
90.92
ISO/CD 13988 [Under development]
Passenger vehicle wheels -- Clip balance weight and rim flange nomenclature, test procedures and performance requirements
30.60
ISO 14400:2005
Road vehicles -- Wheels and rims -- Use, general maintenance and safety requirements and out-of-service conditions
90.92
ISO/CD 14400 [Under development]
Road vehicles -- Wheels and rims -- Use, general maintenance and safety requirements and out-of-service conditions
30.60
ISO 14512:1999
Passenger cars -- Straight-ahead braking on surfaces with split coefficient of friction -- Open-loop test procedure
90.93
ISO 14791:2000
Road vehicles -- Heavy commercial vehicle combinations and articulated buses -- Lateral stability test methods
90.93
ISO 14792:2011
Road vehicles -- Heavy commercial vehicles and buses -- Steady-state circular tests
90.92
ISO/AWI 14792 [Under development]
Road vehicles -- Heavy commercial vehicles and buses -- Steady-state circular tests
20.00
ISO 14793:2011
Road vehicles -- Heavy commercial vehicles and buses -- Lateral transient response test methods
90.93
ISO 14794:2011
Heavy commercial vehicles and buses -- Braking in a turn -- Open-loop test methods
90.93
ISO 15037-1:2006 [Withdrawn]
Road vehicles -- Vehicle dynamics test methods -- Part 1: General conditions for passenger cars
95.99
ISO 15037-1:2019
Road vehicles -- Vehicle dynamics test methods -- Part 1: General conditions for passenger cars
60.60
ISO 15037-2:2002
Road vehicles -- Vehicle dynamics test methods -- Part 2: General conditions for heavy vehicles and buses
90.60
ISO 15172:2005
Road vehicles -- Wheels -- Nut seat strength tests
90.60
ISO 15484:2008
Road vehicles -- Brake lining friction materials -- Product definition and quality assurance
90.92
ISO/NP 15484 [Under development]
Road vehicles -- Brake lining friction materials -- Product definition and quality assurance
10.99
ISO 16234:2006
Heavy commercial vehicles and buses -- Straight-ahead braking on surfaces with split coefficient of friction -- Open-loop test method
90.93
ISO 16333:2011
Heavy commercial vehicles and buses -- Steady-state rollover threshold -- Tilt-table test method
90.93
ISO 16552:2014
Heavy commercial vehicles and buses -- Stopping distance in straight-line braking with ABS -- Open loop and closed loop test methods
60.60
ISO 16833:2006
Road vehicles -- Wheels -- Measurement of radial and lateral run-out
90.92
ISO/CD 16833 [Under development]
Road vehicles -- Wheels -- Measurement of radial and lateral run-out
30.60
ISO 17288-1:2011
Passenger cars -- Free-steer behaviour -- Part 1: Steering-release open-loop test method
90.93
ISO 17288-2:2011
Passenger cars -- Free-steer behaviour -- Part 2: Steering-pulse open-loop test method
90.93
ISO 18375:2016
Heavy commercial vehicles and buses -- Test method for yaw stability -- Sine with dwell test
60.60
ISO 19206-1:2018
Road vehicles -- Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions -- Part 1: Requirements for passenger vehicle rear-end targets
60.60
ISO 19206-2:2018
Road vehicles -- Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions -- Part 2: Requirements for pedestrian targets
60.60
ISO/AWI 19206-3 [Under development]
Road vehicles -- Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions -- Part 3: Requirements for passenger vehicle 3D targets
20.00
ISO/CD 19206-4 [Under development]
Road vehicles -- Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions -- Part 4: Requirements for bicyclist targets
30.60
ISO 19364:2016
Passenger cars -- Vehicle dynamic simulation and validation -- Steady-state circular driving behaviour
60.60
ISO 19365:2016
Passenger cars -- Validation of vehicle dynamic simulation -- Sine with dwell stability control testing
60.60
ISO 19377:2017
Heavy commercial vehicles and buses -- Emergency braking on a defined path -- Test method for trajectory measurement
60.60
ISO/PRF 19380 [Under development]
Heavy commercial vehicles and buses -- Centre of gravity measurements -- Axle lift, tilt-table and stable pendulum test methods
50.00
ISO/DIS 19585 [Under development]
Heavy commercial vehicles and buses -- Vehicle dynamics simulation and validation -- Steady-state circular driving behavior
40.60
ISO/DIS 19586 [Under development]
Heavy commercial vehicles and buses -- Vehicle dynamics simulation and validation -- Lateral dynamic stability of vehicle combinations
40.60
ISO 20918:2007
Road vehicles -- Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems -- Test with roller brake tester
90.93
ISO 21069-1:2004
Road vehicles -- Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester -- Part 1: Pneumatic braking systems
90.93
ISO 21069-2:2008
Road vehicles -- Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester -- Part 2: Air over hydraulic and purely hydraulic braking systems
90.93
ISO/CD 21233 [Under development]
Heavy commercial vehicles and buses -- Vehicle dynamics simulation and validation -- Closing-curve test
30.60
ISO/AWI 21234 [Under development]
Road vehicles -- Heavy commercial vehicles and buses -- Moment of inertia measurement
20.00
ISO 21750:2006
Road vehicles -- Safety enhancement in conjunction with tyre inflation pressure monitoring
90.93
ISO 21994:2007
Passenger cars -- Stopping distance at straight-line braking with ABS -- Open-loop test method
90.93
ISO 21995:2008
Road vehicles -- Test of vehicle air braking systems with a permissible mass of over 3,5 t -- Acquisition and use of reference values using a roller brake tester
90.93
ISO/AWI 22140 [Under development]
Road vehicles --Passenger cars -- Vehicle dynamic simulation and validation -- Lateral transient response test methods
20.00
ISO/PAS 22574:2007
Road vehicles -- Brake linings frictions materials -- Visual inspection
90.60
ISO/AWI 22596 [Under development]
Road vehicles -- Dynamometer metal pick-up generation procedure for disc brakes
20.00
ISO/CD 22733-1 [Under development]
Road vehicles -- Test method to evaluate the performance of autonomous emergency braking systems -- Part 1: Car-to-car
30.60
ISO/CD 22735 [Under development]
Road vehicles --Test method to evaluate the performance of lane-keeping assistance systems
30.60
ISO 26865:2009
Road vehicles -- Brake lining friction materials -- Standard performance test procedure for commercial vehicles with air brakes
90.92
ISO/AWI 26865 [Under development]
Road vehicles -- Brake lining friction materials -- Standard performance test procedure for commercial vehicles with air brakes
20.00
ISO 26866:2009
Road vehicles -- Brake lining friction materials -- Standard wear test procedure for commercial vehicles with air brakes
90.92
ISO/AWI 26866 [Under development]
Road vehicles -- Brake lining friction materials -- Standard wear test procedure for commercial vehicles with air brakes
20.00
ISO 26867:2009
Road vehicles -- Brake lining friction materials -- Friction behaviour assessment for automotive brake systems
90.92
ISO/NP 26867 [Under development]
Road vehicles -- Brake lining friction materials -- Friction behaviour assessment for automotive brake systems
10.99
ISO 27667:2011
Road vehicles -- Brake lining friction materials -- Evaluation of corrosion effects on painted backing plates and brake shoes
90.93

По запросу ничего не найдено