Metallic and oxide coatings — Measurement of coating thickness — Microscopical method

Metallic and oxide coatings — Measurement of coating thickness — Microscopical method

Metallic and oxide coatings — Measurement of coating thickness — Microscopical method

Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems

Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems

Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems

Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems

Metallic coatings — Protection of iron and steel against corrosion — Metal spraying of zinc and aluminium

Metallic and other inorganic coatings — Thermal spraying — Zinc, aluminium and their alloys

Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys

Metallic and other non-organic coatings — Definitions and conventions concerning the measurement of thickness

Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness

Surface treatment and metallic coatings — General classification of terms

Electroplating and related processes — Vocabulary

Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary

Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary

Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution

Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution

Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution

Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method

Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method

Non-conductive coatings on non-magnetic basis metals — Measurement of coating thickness — Eddy current method

Non-conductive coatings on non-magnetic electrically conductive basis materials — Measurement of coating thickness — Amplitude-sensitive eddy-current method

Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method

Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method

Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method

Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature

Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature

Vitreous and porcelain enamels for sheet steel — Production of specimens for testing

Vitreous and porcelain enamels for sheet steel — Production of specimens for testing

Vitreous and porcelain enamels for cast iron — Production of specimens for testing

Vitreous and porcelain enamels — Apparatus for testing with acid and neutral liquids and their vapours

Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids

Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids

Vitreous and porcelain enamels — Determination of resistance to boiling citric acid

Vitreous and porcelain enamels — Determination of resistance to boiling citric acid

Vitreous and porcelain enamels — Determination of resistance to boiling hydrochloric acid

Vitreous and porcelain enamels — Determination of resistance to condensing hydrochloric acid vapour

Vitreous and porcelain enamels — Determination of resistance to boiling water and water vapour

Vitreous and porcelain enamels — Determination of resistance to boiling water and water vapour

Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide

Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide

Vitreous and porcelain enamels — Enamelled articles for service under highly corrosive conditions — High voltage test

Vitreous and porcelain enamels — Enamelled articles for service under highly corrosive conditions — High voltage test

Vitreous and porcelain enamels — High voltage test

Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock

Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock

Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion

Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion

Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods

Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods

Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods

Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method

Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method

Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method — Technical Corrigendum 1

Chromate conversion coatings on zinc and cadmium — Test methods

Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods

Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods

Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods

Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method

Metallic and other non-organic coatings — Review of methods of measurement of thickness

Metallic and other non-organic coatings — Review of methods of measurement of thickness

Metallic and other inorganic coatings — Review of methods of measurement of thickness

Metallic and other inorganic coatings — Review of methods of measurement of thickness

Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods

Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods

High velocity oxygen fuel (HVOF) cermet coatings for metallurgical roll components — Guidance with requirements

Metallic and related coatings — Vickers and Knoop microhardness tests

Metallic coatings — Measurement of coating thickness — Profilometric method

Metallic coatings — Measurement of coating thickness — Profilometric method

Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes

Vitreous and porcelain enamel finishes — Selection of test methods for vitreous and porcelain enamelled areas of articles

Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain enamelled areas of articles

Vitreous and porcelain enamel finishes — Selection of test methods for vitreous and porcelain enamelled areas of articles

Vitreous and porcelain enamelled manufactured articles — Determination of resistance to heat

Vitreous and porcelain enamelled manufactured articles — Determination of resistance to heat

Vitreous and porcelain enamels — Release of lead and cadmium from enamelled ware in contact with food — Part 1: Method of test

Vitreous and porcelain enamels — Release of lead and cadmium from enamelled ware in contact with food — Part 2: Permissible limits

Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits

Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits

Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits

Vitreous and porcelain enamels — Determination of the resistance of enamelled articles to impact — Pistol test

Vitreous and porcelain enamels — Determination of resistance to hot detergent solutions used for washing textiles

Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test

Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test

Vitreous and porcelain enamels — Apparatus for determination of resistance to hot detergent solutions used for washing textiles

Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 1: Abrasion testing apparatus

Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 2: Loss in mass after sub-surface abrasion

Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 2: Loss in mass after sub-surface abrasion

Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 2: Loss in mass after sub-surface abrasion

Vitreous and porcelain enamels — Determination of surface scratch hardness according to the Mohs scale

Metallic coatings for electromagnetic interference shielding — Designation and characterization method

Atomic layer deposition — Vocabulary

Vitreous and porcelain enamels — Low-voltage test for detecting and locating defects — Part 1: Swab test for non-profiled surfaces

Vitreous and porcelain enamels — Low-voltage test for detecting and locating defects — Part 2: Slurry test for profiled surfaces

Vitreous and porcelain enamels — Low voltage test for detecting and locating defects

Vitreous and porcelain enamels — Low voltage test for detecting and locating defects

Vitreous and porcelain enamels — Determination of resistance to sulfuric acid at room temperature

Vitreous and porcelain enamels — Determination of resistance to sulfuric acid at room temperature

Vitreous and porcelain enamels — Method of test of self-cleaning properties

Metallic coatings — Review of methods of measurement of ductility

Metallic coatings — Review of methods of measurement of ductility

Metallic coatings — Measurement of coating thickness — Scanning electron microscope method

Metallic coatings — Measurement of coating thickness — Scanning electron microscope method

Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods

Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods

Metallic and other inorganic coatings — Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods — Inclined wedge method

Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing

Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing

Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing

Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions

Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings

Thermal spraying — Thermally sprayed coatings — Symbolic representation on drawings

Thermal spraying — Recommendations for thermal spraying

Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities

Metallic and other inorganic coatings — Test method of cyclic heating for thermal-barrier coatings under temperature gradient

Vitreous and porcelain enamels for aluminium — Production of specimens for testing

Vitreous and porcelain enamels for aluminium — Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)

Vitreous and porcelain enamels — Corrosion tests in closed systems

Vitreous and porcelain enamels — Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry

Vitreous and porcelain enamels — Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry — Technical Corrigendum 1

Vitreous and porcelain enamels — Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry

Metallic and other inorganic coatings — Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method

Metallic and other inorganic coatings — Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings

Thermal spraying — Acceptance inspection of thermal spraying equipment

Thermal spraying — Powders — Part 1: Characterization and technical supply conditions

Thermal spraying — Powders — Part 2: Comparison of coating performance and spray powder chemistry

Thermal spraying — Powders — Composition and technical supply conditions

Metallic coatings on non-metallic basis materials — Measurement of coating thickness — Micro-resistivity method

Thermal spraying — Determination of tensile adhesive strength

Thermal spraying — Determination of tensile adhesive strength

Thermal spraying — Terminology, classification

Thermal spraying — Terminology, classification

Thermal spraying — Approval testing of thermal sprayers

Thermal spraying — Qualification testing of thermal sprayers

Thermal spraying — Qualification testing of thermal sprayers

Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions

Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions

Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification and technical supply conditions

Thermal spraying — Spraying and fusing of self-fluxing alloys

Thermal spraying — Spraying and fusing of self-fluxing alloys

Thermal spraying — Spraying and fusing of self-fluxing alloys

Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components

Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components

Thermal spraying — Quality requirements of thermally sprayed structures — Part 1: Guidance for selection and use

Thermal spraying — Quality requirements of thermally sprayed structures — Part 2: Comprehensive quality requirements

Thermal spraying — Quality requirements of thermally sprayed structures — Part 3: Standard quality requirements

Thermal spraying — Quality requirements of thermally sprayed structures — Part 4: Elementary quality requirements

Thermal spraying — Quality requirements for manufacturers of thermal sprayed coatings

Thermal spraying — Characterization and testing of thermally sprayed coatings

Thermal spraying — Post-treatment and finishing of thermally sprayed coatings

Vitreous and porcelain enamels — Determination of scratch resistance of enamel finishes

Vitreous and porcelain enamels — Determination of scratch resistance of enamel finishes — Technical Corrigendum 1

Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method

Metallic and other inorganic coatings — Definitions and conventions concerning appearance

Metallic and other inorganic coatings — Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)

Thermal spraying — Coatings for protection against corrosion and oxidation at elevated temperatures

Thermal spraying — Determination of the deposition efficiency for thermal spraying

Thermal spraying — Determination of the deposition efficiency for thermal spraying

Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method

Metallic and other inorganic coatings — Determination of thermal conductivity of thermal barrier coatings

Thermal spraying — Classification method of adhesive strength by indentation

Atomic layer deposition — Chemical characteristics and related process specifications of atomic layer deposition precursors

Metallic and other inorganic coatings — Measurement of Young's modulus of thermal barrier coatings by beam bending

Vitreous and porcelain enamels — Terminology — Part 1: Terms and definitions

Vitreous and porcelain enamels — Terminology — Part 2: Visual representations and descriptions

Metallic and other inorganic coatings- Determination of volume fraction of monoclinic phase in yttria stabilized zirconia of thermal barrier coatings by X-ray diffractometry

Thermal spraying — Determination of interfacial toughness of ceramic coatings by indentation

Vitreous and porcelain enamels — Preparation of samples and determination of thermal expansion coefficient

Carbon based films — Determination of load carrying capacity of diamond-like carbon films by ball-on-disc reciprocating method accompanying with load increasing

Carbon based films — Classification and designations

Metallic and other inorganic coatings — DC magnetron sputtered silver coatings for engineering purposes — Measurement of coating adhesion

Specification and requirements of thermal spray coatings for power plant boiler tubes

Determination of the residual stress of TGO layer in thermal barrier coating by photoexcitation fluorescence piezoelectric spectroscopy

Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling

Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method

Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method

Metallic and other inorganic coatings — Measurement of the linear thermal expansion coefficient of thermal barrier coatings

Ellipsometry — Part 2: Bulk material model

Ellipsometry — Part 3: Transparent single layer model

Ellipsometry — Principles

Carbon based films — Determination of optical properties of amorphous carbon films by spectroscopic ellipsometry

Metallic and other inorganic coatings — Measurement of Young’s modulus of thermal barrier coatings at elevated temperature by flexural resonance method

Metallic and other inorganic coatings — Determination of thermal conductivity of thermal barrier coatings at elevated temperature

Carbon-based films — Rockwell indentation test to evaluate adhesion

Atomic layer deposition of alumina coatings for silicon solar cell — requirements and test methods

Area selective atomic layer deposition — Specification and test methods

Peel strength of metallic coatings on plastics — Designation and test method under controlled temperatures

Corrosion protection of offshore wind structures — Part 1: Design considerations

Corrosion protection of offshore wind structures — Part 2: Primary steel components — general requirements for thermal spraying and painting

Corrosion protection of offshore wind structures — Part 3: Primary steel components — Supplementary requirements for Foundations

Corrosion protection of offshore wind structures — Part 4: Primary steel components — Supplementary requirements for Towers

Corrosion protection of offshore wind structures — Part 5: Supplementary requirements for primary structural steel- and cast components for rotor nacelle assembly

Classification and Specification of Thermal Spray Seal Coatings for Gas Turbines — Low-temperature Applications

High Velocity Oxygen Fuel (HVOF) cermet coatings for battery pole piece rollers — Guidance with requirements

Laser surface treatment and related coatings — Terminology, Classification

Powder coating by atomic layer deposition — Specification and test methods

Metallic coatings — Technical requirements and testing of metallic laser cladding coatings

Vitreous and porcelain enamels--Determination of adhesion rate of electrostatic dry powder bisque coating

Heat-resistant coating for electrochemical energy storage battery system — Technical requirements

Non-metallic coatings--Measurement of thickness--Terahertz method

Specifications and requirements for laser cladding coatings on key components of thermal power generation equipment

Metallic and other inorganic coatings — Electrodeposited coatings of tin-cobalt alloy

Metallic and other inorganic coatings — Electrodeposited coatings of tin-cobalt alloy

Standard method for porosity measurement of thermally sprayed coatings

Thermal spraying — Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 1: Determination of resistance to chemical corrosion by acids at room temperature

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed systems

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed systems

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 6: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel with a volume surface ratio 3:1 cm

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 1: Quality requirements for apparatus, components, appliances and accessories

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 1: Quality requirements for apparatus, components, appliances and accessories

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 3: Thermal shock resistance

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 5: Presentation and characterization of defects

Vitreous and porcelain enamels — Characteristics of enamel coatings applied to steel panels intended for architecture

Vitreous and porcelain enamels — Determination of the edge covering on enamelled steel plate to be used in heat exchangers

Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces — Specification

Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces — Specification

Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers — Specifications

Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers — Specifications

Vitreous and porcelain enamels — Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron

Vitreous and porcelain enamels — Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron

Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges

Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges

Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges