• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 79/SC 6 Секретариата Этап ICS
ISO 209-1:1989
Wrought aluminium and aluminium alloys — Chemical composition and forms of products — Part 1: Chemical composition
95.99
ISO 209-2:1989
Wrought aluminium and aluminium alloys — Chemical composition and forms of products — Part 2: Forms of products
95.99
ISO 209:2007
Aluminium and aluminium alloys — Chemical composition
90.93
ISO/R 209:1971
Composition of wrought products of aluminium and aluminium alloys — Chemical composition (per cent)
95.99
ISO/R 826:1968
Mechanical property limits for rolled products of aluminium and aluminium alloys
95.99
ISO/R 827:1968
Mechanical property limits for extruded products of aluminium and aluminium alloys
95.99
ISO/R 828:1968
Mechanical property limits for rivet stock of aluminium and aluminium alloys
95.99
ISO/R 829:1968
Mechanical property limits for aluminium alloy forgings
95.99
ISO/TR 2136:1977
Wrought aluminium and aluminium alloys — Rolled products — Mechanical properties
95.99
ISO 2142:1981
Wrought aluminium, magnesium and their alloys — Selection of specimens and test pieces for mechanical testing
95.99
ISO/TR 2778:1977
Wrought aluminium and aluminium alloys — Drawn tubes — Mechanical properties
95.99
ISO 2779:1973
Aluminium machining alloys — Chemical composition and mechanical properties of alloys Al-Cu6 Bi Pb and Al-Cu4 Pb Mg
95.99
ISO 3335:1977
Extruded solid profiles in aluminium-zinc- magnesium alloy Al Zn4,5 Mg1 (7020) — Chemical composition and mechanical properties
95.99
ISO 5191:1980
Wrought aluminium and aluminium alloy products — General conditions for inspection and delivery
95.99
ISO 5193:1981
Wrought aluminium and aluminium alloys — Drawn round bars — Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)
95.99
ISO 6361-1:1986
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 1: Technical conditions for inspection and delivery
95.99
ISO 6361-1:2011
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery
90.93
ISO 6361-2:1987
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 2: Mechanical properties
95.99
ISO 6361-2:1990
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 2: Mechanical properties
95.99
ISO 6361-2:2011
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
95.99
ISO 6361-2:2014
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
90.20
ISO 6361-3:1985
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 3: Strips — Tolerances on shape and dimensions
95.99
ISO 6361-3:2011
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions
95.99
ISO 6361-3:2014
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions
90.20
ISO 6361-4:1988
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 4: Sheets and plates — Tolerances on form and dimensions
95.99
ISO 6361-4:2011
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions
95.99
ISO 6361-4:2014
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions
90.20
ISO 6361-5:2011
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition
90.93
ISO 6362-1:1986
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
95.99
ISO 6362-1:2012
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
90.92
ISO 6362-2:1987
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
95.99
ISO 6362-2:1990
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
95.99
ISO 6362-2:2012
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
95.99
ISO 6362-2:2014
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
90.92
ISO 6362-3:1990
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on dimensions and form
95.99
ISO 6362-3:2001
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
95.99
ISO 6362-3:2012
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
90.92
ISO 6362-4:1988
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 4: Extruded profiles — Tolerances on shape and dimensions
95.99
ISO 6362-4:2012
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions
90.92
ISO 6362-5:1991
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 5: Extruded round, square and hexagonal bars — Tolerances on form and dimensions
95.99
ISO 6362-5:2001
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 5: Extruded round, square and hexagonal bars — Tolerances on shape and dimensions
95.99
ISO 6362-5:2012
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions
90.92
ISO 6362-6:2012
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions
90.93
ISO 6362-7:2012
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
95.99
ISO 6362-7:2014
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
90.92
ISO/AWI 6362-1
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
20.00
ISO/AWI 6362-2
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
20.00
ISO/AWI 6362-3
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
20.00
ISO/AWI 6362-4
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions
20.00
ISO/AWI 6362-5
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions
20.00
ISO/AWI 6362-7
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
20.00
ISO 6363-1:1988
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 1: Technical conditions for inspection and delivery
95.99
ISO 6363-1:2012
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery
90.92
ISO 6363-2:1993
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 2: Mechanical properties
95.99
ISO 6363-2:2012
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars and tubes and wires — Part 2: Mechanical properties
90.92
ISO 6363-3:2012
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3: Drawn round bars and wires — Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)
90.92
ISO 6363-4:1991
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 4: Drawn rectangular bars — Tolerances on form and dimensions
95.99
ISO 6363-4:2012
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 4: Drawn rectangular bars and wires — Tolerances on form and dimensions
90.92
ISO 6363-5:1992
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 5: Drawn square and hexagonal bars — Tolerances on form and dimensions
95.99
ISO 6363-5:2012
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 5: Drawn square and hexagonal bars and wires — Tolerances on form and dimensions
90.92
ISO 6363-6:2012
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6: Drawn round tubes — Tolerances on form and dimensions
90.92
ISO/AWI 6363-1
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery
20.00
ISO/AWI 6363-2
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars and tubes and wires — Part 2: Mechanical properties
20.00
ISO/AWI 6363-3
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3: Drawn round bars and wires — Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)
20.00
ISO/AWI 6363-4
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 4: Drawn rectangular bars and wires — Tolerances on form and dimensions
20.00
ISO/AWI 6363-5
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 5: Drawn square and hexagonal bars and wires — Tolerances on form and dimensions
20.00
ISO/AWI 6363-6
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6: Drawn round tubes — Tolerances on form and dimensions
20.00
ISO 6365-1:1988
Wrought aluminium and aluminium alloy cold-drawn wire — Part 1: Technical conditions for inspection and delivery
95.99
ISO 7271:1982
Aluminium and aluminium alloys — Foil and thin strip — Dimensional tolerances
95.99
ISO 7271:2011
Aluminium and aluminium alloys — Foil and thin strip — Dimensional tolerances
90.93
ISO 7273:1981
Wrought aluminium and aluminium alloys — Extruded round bars — Tolerances on shape and dimensions
95.99
ISO 7274:1981
Wrought aluminium and aluminium alloys — Drawn round bars — Tolerances on shape and dimensions (All minus tolerances on diameter)
95.99
ISO/TR 7735:1982
Wrought aluminium and aluminium alloys — Sheet — Tolerances on shape and dimensions
95.99

По запросу ничего не найдено