Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick

Recommended practice for radiographic examination of fusion welded joints — Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness

Recommended practice for radiographic examination of fusion welded joints — Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness

Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick

Radiography of welds and viewing conditions for films — Utilization of recommended patterns of image quality indicators (I.Q.I.)

Fusion-welded butt joints in steel — Transverse tensile test

Destructive tests on welds in metallic materials — Transverse tensile test

Destructive tests on welds in metallic materials — Transverse tensile test

Destructive tests on welds in metallic materials — Transverse tensile test

Non-destructive testing of welds — Phased array ultrasonic testing (UT-PA) for thin-walled steel components — Acceptance levels

Destructive tests on welds in metallic materials — Bend tests

Destructive tests on welds in metallic materials — Bend tests

Destructive tests on welds in metallic materials — Bend tests — Amendment 1

Destructive tests on welds in metallic materials — Bend tests

Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints

Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints

Spot welding equipment — Taper plug gauges and taper ring gauges

Welds in steel — Calibration block No. 2 for ultrasonic examination of welds

Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints

Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints

Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints

Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination

Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination

Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination

Destructive tests on welds in metallic materials — Fracture test

Destructive tests on welds in metallic materials — Fracture test

Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints

Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints

Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys

Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys

Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys

Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys

Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys

Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys

Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)

Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)

Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)

Non-destructive testing of welds — Ultrasonic testing — Acceptance levels

Non-destructive testing of welds — Ultrasonic testing — Acceptance levels

Non-destructive testing of welds — Ultrasonic testing — Acceptance levels

Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology

Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology

Non-destructive testing of welds — Ultrasonic testing — Phased array technique

Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels

Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels

Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels

Destructive tests on welds in metallic materials — Etchants for macroscopic and microscopic examination

Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion

Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion

Non-destructive testing of welds — General rules for fusion welds in metallic materials

Non-destructive testing of welds — General rules for metallic materials

Non-destructive testing of welds — General rules for metallic materials

Non-destructive testing of welds — General rules for metallic materials

Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film

Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film

Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors

Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors

Non-destructive testing of welds — Radiographic testing of fusion-welded joints

Non-destructive testing of welds — Visual testing of fusion-welded joints

Non-destructive testing of welds — Visual testing of fusion-welded joints

Non-destructive testing of welds — Magnetic particle testing

Non-destructive testing of welds — Magnetic particle testing

Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds

Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds

Non-destructive testing of welds — Ultrasonic testing of welded joints

Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment

Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment

Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment

Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment

Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 1: General

Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests

Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests

Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests

Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1: General

Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests

Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests

Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis

Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis

Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels

Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels

Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components

Non-destructive testing of welds — Ultrasonic testing — Phased array technique for thin-walled steel components

Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys

Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys

Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys

Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys

Destructive tests on welds in metallic materials — Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)

Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels

Non-destructive testing of welds — Penetrant testing — Acceptance levels

Non-destructive testing of welds — Magnetic particle testing of welds — Acceptance levels

Non-destructive testing of welds — Magnetic particle testing — Acceptance levels

Non-destructive testing of welds — Ultrasonic testing — Characterization of indications in welds

Non-destructive testing of welds — Ultrasonic testing — Characterization of indications in welds

Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds

Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds