Guide for addressing accessibility in standards

Geometrical orientation and directions of movements

Spatial orientation and direction of movement — Ergonomic requirements

Information technology — User interfaces — Evaluating usability of natural user interfaces

Multivariate analysis using anthropometric data and a virtual fit tool

Assistive products — Accessibility guidelines and requirements to survey the needs of persons with sensory disabilities for assistive products and services

Ergonomic principles in the design of work systems

Ergonomic principles in the design of work systems

Ergonomics principles in the design of work systems

Ergonomics — The application of ISO/TR 12295, ISO 11226, the ISO 11228 series and ISO/TR 23476 in the construction sector (civil construction)

Hot environments — Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)

Hot environments — Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)

Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index

Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks

Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks

Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations

Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations — Amendment 1

Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations

Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards

Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards

Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists

Basic human body measurements for technological design

Thermal environments — Instruments and methods for measuring physical quantities

Ergonomics of the thermal environment — Instruments for measuring physical quantities

Ergonomics of the thermal environment — Instruments for measuring and monitoring physical quantities

Moderate thermal environments — Determination of the PMV and PPD indices and specification of the conditions for thermal comfort

Moderate thermal environments — Determination of the PMV and PPD indices and specification of the conditions for thermal comfort

Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

Danger signals for work places — Auditory danger signals

Ergonomics — Danger signals for public and work areas — Auditory danger signals

Hot environments — Analytical determination and interpretation of thermal stress using calculation of required sweat rate

Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

Ergonomics of the thermal environment — Management of working conditions in hot environments

Road vehicles — Box task and detection response task to measure visual-manual and cognitive demand

Road vehicles — Ergonomic aspects of human vehicle interactions — Taxonomy for the classification of adaptive interactive vehicle systems

Information technology — Brain-computer interfaces — Vocabulary

Light and lighting — Lighting of work places — Part 1: Indoor

Lighting of work places — Part 1: Indoor

Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places

Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places

Principles of visual ergonomics — The lighting of indoor work systems

Lighting of work places — Part 1: Indoor — Technical Corrigendum 1

Ergonomics — Determination of metabolic heat production

Ergonomics of the thermal environment — Determination of metabolic rate

Ergonomics of the thermal environment — Determination of metabolic rate

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 1: General introduction

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 1: General introduction

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 1: General introduction — Amendment 1

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 2: Guidance on task requirements

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 3: Visual display requirements

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 3: Visual display requirements — Amendment 1: .

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 4: Keyboard requirements

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 4: Keyboard requirements — Technical Corrigendum 1

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 5: Workstation layout and postural requirements

Ergonomics of human-system interaction — Part 5: Workstation layout and postural requirements

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 6: Guidance on the work environment

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 7: Requirements for display with reflections

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 8: Requirements for displayed colours

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 9: Requirements for non-keyboard input devices

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 10: Dialogue principles

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 11: Guidance on usability

Ergonomics of human-system interaction — Part 11: Usability: Definitions and concepts

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 12: Presentation of information

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 13: User guidance

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 14: Menu dialogues

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 15: Command dialogues

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 16: Direct manipulation dialogues

Ergonomic requirements for office work with visual display terminals (VDTs) — Part 17: Form filling dialogues

Ergonomics of human-system interaction — Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services

Ergonomics of human-system interaction — Part 20: An ergonomic approach to accessibility within the ISO 9241 series

Ergonomics of human-system interaction — Part 100: Introduction to standards related to software ergonomics

Ergonomics of human-system interaction — Part 100: Overview of ISO 9241 software ergonomic standards

Ergonomics of human-system interaction — Part 110: Dialogue principles

Ergonomics of human-system interaction — Part 110: Interaction principles

Ergonomics of human-system interaction — Part 112: Principles for the presentation of information

Ergonomics of human-system interaction — Part 112: Principles for the presentation of information

Ergonomics of human-system interaction — Part 115: Guidance on conceptual design, user-system interaction design, user interface design and navigation design

Ergonomics of human-system interaction — Part 125: Guidance on visual presentation of information

Ergonomics of human-system interaction — Part 126: Guidance on the presentation of auditory information

Ergonomics of human-system interaction — Part 129: Guidance on software individualization

Ergonomics of human-system interaction — Part 130: User assistance within interactive systems

Ergonomics of human-system interaction — Part 143: Forms

Ergonomics of human-system interaction — Part 151: Guidance on World Wide Web user interfaces

Ergonomics of human-system interaction — Part 154: Interactive voice response (IVR) applications

Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements

Ergonomics of human-system interaction — Part 161: Visual user-interface elements

Ergonomics of human-system interaction — Part 171: Guidance on software accessibility

Ergonomics of human-system interaction — Part 171: Software accessibility

Ergonomics of human-system interaction — Part 210: Human-centred design for interactive systems

Ergonomics of human-system interaction — Part 210: Human-centred design for interactive systems

Ergonomics of human-system interaction — Part 220: Processes for enabling, executing and assessing human-centred design within organizations

Ergonomics of human-system interaction — Part 221: Human-centred design process assessment model

Ergonomics of human-system interaction — Part 222: Self-assessment of human-centred design approach

Ergonomics of human-system interaction — Part 300: Introduction to electronic visual display requirements

Ergonomics of human-system interaction — Part 302: Terminology for electronic visual displays

Ergonomics of human-system interaction — Part 303: Requirements for electronic visual displays

Ergonomics of human-system interaction — Part 303: Requirements for electronic visual displays

Ergonomics of human-system interaction — Part 304: User performance test methods for electronic visual displays

Ergonomics of human-system interaction — Part 305: Optical laboratory test methods for electronic visual displays

Ergonomics of human-system interaction — Part 306: Field assessment methods for electronic visual displays

Ergonomics of human-system interaction — Part 306: Field assessment methods for electronic visual displays

Ergonomics of human-system interaction — Part 307: Analysis and compliance test methods for electronic visual displays

Ergonomics of human-system interaction — Part 308: Surface-conduction electron-emitter displays (SED)

Ergonomics of human-system interaction — Part 309: Organic light-emitting diode (OLED) displays

Ergonomics of human-system interaction — Part 310: Visibility, aesthetics and ergonomics of pixel defects

Ergonomics of human-system interaction — Part 311: Application of ISO 9241-307: LCD screens for workstations

Ergonomics of human-system interaction — Part 312: Readability of electrophoretic displays

Ergonomics of human-system interaction — Part 313: Optical measurement methods for reflective displays

Ergonomics of human-system interaction — Part 331: Optical characteristics of autostereoscopic displays

Ergonomics of human-system interaction — Part 333: Stereoscopic displays using glasses

Ergonomics of human-system interaction — Part 380: Survey result of HMD (Head-Mounted Displays) characteristics related to human-system interaction

Ergonomics of human-system interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures

Ergonomics of human-system interaction — Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images

Ergonomics of human-system interaction — Part 393: Structured literature review of visually induced motion sickness during watching electronic images

Ergonomics of human-system interaction — Part 394: Ergonomic requirements for reducing undesirable biomedical effects of visually induced motion sickness during watching electronic images

Ergonomics of human—system interaction — Part 400: Principles and requirements for physical input devices

Ergonomics of human-system interaction — Part 410: Design criteria for physical input devices

Ergonomics of human-system interaction — Part 410: Design criteria for physical input devices — Amendment 1

Ergonomics of human-system interaction — Part 411: Evaluation methods for the design of physical input devices

Ergonomics of human-system interaction — Part 420: Selection of physical input devices

Ergonomics of human-system interaction — Part 430: Recommendations for the design of non-touch gestural input for the reduction of biomechanical stress

Ergonomics of human-system interaction — Part 500: Ergonomic principles for the design and evaluation of environments of interactive systems

Ergonomics of human-system interaction — Part 514: Guidance for the application of anthropometric data in the ISO 9241-500 series

Ergonomics of human-system interaction — Part 520: Ergonomics aspect of activity-based working (ABW)

Ergonomics of human-system interaction — Part 610: Impact of light and lighting on users of interactive systems

Ergonomics of human-system interaction — Part 620: The role of sound for users of interactive systems

Ergonomics of human-system interaction — Part 810: Robotic, intelligent and autonomous systems

Ergonomics of human-system interaction — Part 820: Ergonomic guidance on interactions in immersive environments, including augmented reality and virtual reality

Ergonomics of human-system interaction — Part 910: Framework for tactile and haptic interaction

Ergonomics of human-system interaction — Part 920: Guidance on tactile and haptic interactions

Ergonomics of human-system interaction — Part 920: Tactile and haptic interactions

Ergonomics of human-system interaction — Part 940: Evaluation of tactile and haptic interactions

Ergonomics of human-system interaction — Part 960: Framework and guidance for gesture interactions

Ergonomics of human-system interaction — Part 971: Accessibility of tactile/haptic interactive systems

Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators

Ergonomic requirements for the design of displays and control actuators — Part 2: Displays

Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators

Evaluation of thermal strain by physiological measurements

Ergonomics — Evaluation of thermal strain by physiological measurements

Ergonomics of the thermal environment — Estimation of the thermal insulation and evaporative resistance of a clothing ensemble

Ergonomics of the thermal environment — Estimation of thermal insulation and water vapour resistance of a clothing ensemble

Ergonomic assessment of speech communication — Part 1: Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method)

Ergonomics — Assessment of speech communication

Ergonomic principles related to mental workload — Part 1: General issues and concepts, terms and definitions

Ergonomic principles related to mental workload — Part 2: Design principles

Ergonomic principles related to mental workload — Part 2: Design principles

Ergonomic principles related to mental workload — Part 3: Principles and requirements concerning methods for measuring and assessing mental workload

Ergonomic principles related to mental work-load — General terms and definitions

Ergonomics of the thermal environment — Assessment of the influence of the thermal environment using subjective judgement scales

Ergonomics of the physical environment — Subjective judgement scales for assessing physical environments

Ergonomic design of control centres — Part 1: Principles for the design of control centres

Ergonomic design of control centres — Part 2: Principles for the arrangement of control suites

Ergonomic design of control centres — Part 3: Control room layout

Ergonomic design of control centres — Part 3: Control room layout — Technical Corrigendum 1

Ergonomic design of control centres — Part 4: Layout and dimensions of workstations

Ergonomic design of control centres — Part 4: Layout and dimensions of workstations

Ergonomic design of control centres — Part 5: Displays and controls

Ergonomic design of control centres — Part 6: Environmental requirements for control centres

Ergonomic design of control centres — Part 7: Principles for the evaluation of control centres

Ergonomic design of control centres — Part 10: Introduction to the control room design series of standards

Ergonomics of the thermal environment — Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects

Evaluation of cold environments — Determination of required clothing insulation (IREQ)

Ergonomics — Evaluation of static working postures

Ergonomics — Evaluation of static working postures — Technical Corrigendum 1

Ergonomics — Manual handling — Part 1: Lifting and carrying

Ergonomics — Manual handling — Part 1: Lifting, lowering and carrying

Ergonomics — Manual handling — Part 2: Pushing and pulling

Ergonomics — Manual handling — Part 2: Pushing and pulling — Amendment 1

Ergonomics — Manual handling — Part 3: Handling of low loads at high frequency

Ergonomics — Manual handling — Part 3: Repetitive movements and exertions of the upper limbs

Ergonomics of the thermal environment — Principles and application of relevant International Standards

Ergonomics — Visual danger signals — General requirements, design and testing

Ergonomics — System of auditory and visual danger and information signals

Ergonomics — Application document for International Standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) and evaluation of static working postures (ISO 11226)

Ergonomics — Manual handling of people in the healthcare sector

Aircraft ground handling — Checked baggage — Part 3: Workstation ergonomics

Ergonomics of the thermal environment — Medical supervision of individuals exposed to extreme hot or cold environments

Ergonomic requirements for work with visual displays based on flat panels — Part 1: Introduction

Ergonomic requirements for work with visual displays based on flat panels — Part 2: Ergonomic requirements for flat panel displays

Human-centred design processes for interactive systems

Ergonomics of the thermal environment — Vocabulary and symbols

Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces

Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature

Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces

Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems

Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems

Ergonomics of the thermal environment — Application of International Standards to people with special requirements

Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 1: Principles and methods for assessment of thermal stress

Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 1: Principles and methods for assessment of thermal stress

Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature

Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature — Technical Corrigendum 1

Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature

Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 3: Evaluation of thermal comfort using human subjects

Ergonomics of the thermal environment — Evaluation of the thermal environment in vehicles — Part 3: Evaluation of thermal comfort using human participants

Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 4: Determination of the equivalent temperature by means of a numerical manikin

Safety of machinery — Anthropometric requirements for the design of workstations at machinery

Safety of machinery — Anthropometric requirements for the design of workstations at machinery — Technical Corrigendum 1

Safety of machinery — Anthropometric requirements for the design of workstations at machinery — Technical Corrigendum 2

Software ergonomics for multimedia user interfaces — Part 1: Design principles and framework

Software ergonomics for multimedia user interfaces — Part 2: Multimedia navigation and control

Software ergonomics for multimedia user interfaces — Part 3: Media selection and combination

Road vehicles — Ergonomic aspects of transport information and control systems — Dialogue management principles and compliance procedures

Road vehicles — Ergonomic aspects of transportation and control systems — Dialogue management principles and compliance procedures

Road vehicles — Ergonomic aspects of transport information and control systems — Specifications for in-vehicle auditory presentation

Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters

Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters

Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures

Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures

Road vehicles — Measurement and analysis of driver visual behaviour with respect to transport information and control systems

Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and compliance procedures for in-vehicle visual presentation

Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and test procedures for in-vehicle visual presentation

Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and test procedures for in-vehicle visual presentation

Ergonomics of the thermal environment — Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions

Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery

Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery

Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings

Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings

Ergonomic design for the safety of machinery — Part 3: Anthropometric data

Ergonomic design for the safety of machinery — Part 3: Anthropometric data

General requirements for establishing anthropometric databases

General requirements for establishing anthropometric databases

General requirements for establishing anthropometric databases

General requirements for establishing anthropometric databases

Ergonomics — Computer manikins and body templates — Part 1: General requirements

Ergonomics — Computer manikins and body templates — Part 2: Verification of functions and validation of dimensions for computer manikin systems

Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs

Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs

Ergonomics of the thermal environment — Cold workplaces — Risk assessment and management

Ergonomics of human-system interaction — Guidance on accessibility for human-computer interfaces

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 1: General description, basic requirements

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 1: General description, basic requirements

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 2: Visibility

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 2: Visibility

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 3: Information devices and controls

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 3: Information devices and controls

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 4: Cabin environment

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 4: Cabin environment

Road vehicles — Ergonomic aspects of in-vehicle presentation for transport information and control systems — Warning systems

Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures

Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures

Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures — Amendment 1: ORP, FeV, MTF10MIN(1:1)/hor, MTF10MIN(1:1)/ver

Road vehicles — Ergonomic aspects of transport information and control systems — Occlusion method to assess visual demand due to the use of in-vehicle systems

Road vehicles — Ergonomic aspects of transport information and control systems — Occlusion method to assess visual demand due to the use of in-vehicle systems

Ergonomics methods — Part 1: Feedback method — A method to understand how end users perform their work with machines

Ergonomics methods — Part 2: A methodology for work analysis to support design

Road vehicles — Ergonomic aspects of transport information and control systems (TICS) — Procedures for determining priority of on-board messages presented to drivers

Road vehicles — Ergonomic aspects of transport information and control systems (TICS) — Procedures for determining priority of on-board messages presented to drivers

Ergonomics of human-system interaction — Usability methods supporting human-centred design

Accessible design — Application of braille on signage, equipment and appliances

Accessible design — Consideration and assistive products for accessible meeting

Accessible design — Consideration and assistive products for accessible meeting

3-D human body scan data — Methods for the processing of human body scan data

Road vehicles — Ergonomic aspects of transport information and control systems — Procedure for assessing suitability for use while driving

Biomechanical effects on amusement ride passengers

Ergonomics of human-system interaction — Specification for the process assessment of human-system issues

Ergonomics of human-system interaction — Specification for the process assessment of human-system issues

Ergonomics — Ergonomics of human-system interaction — Human-centred lifecycle process descriptions

Accessible design — Shape and colour of a flushing button and a call button, and their arrangement with a paper dispenser installed on the wall in public restroom

Design principles for communication support board using pictorial symbols

Accessible design — Information contents, figuration and display methods of tactile guide maps

Accessible design — Auditory guiding signals in public facilities

Ergonomics — Construction and application of tests for speech technology

Unwanted reflections from the active and inactive areas of display surfaces visible during use

Ease of operation of everyday products — Part 1: Design requirements for context of use and user characteristics

Ease of operation of everyday products — Part 2: Test method for walk-up-and-use products

Usability of consumer products and products for public use — Part 2: Summative test method

Ease of operation of everyday products — Part 3: Test method for consumer products

Ease of operation of everyday products — Part 4: Test method for the installation of consumer products

Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Biometrics and elderly people

Ergonomic procedures for the improvement of local muscular workloads — Part 1: Guidelines for reducing local muscular workloads

Ergonomics guidelines for the optimization of musculoskeletal workload

3-D scanning methodologies for internationally compatible anthropometric databases — Part 1: Evaluation protocol for body dimensions extracted from 3-D body scans

Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions

Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions

3-D scanning methodologies for internationally compatible anthropometric databases

3-D scanning methodologies for internationally compatible anthropometric databases

Information technology — User interfaces — Icons for representing services in serviced offices

Ergonomics — Accessible design — Controls of consumer products

Ergonomics of human-system interaction — Electronic paper display — Indoor use

Road vehicles — Ergonomics aspects of transport information and control systems — Human machine interface specifications for keyless ignition systems

Safety of machinery — Relationship with ISO 12100 — Part 3: Implementation of ergonomic principles in safety standards

General requirements for establishing muscular strength databases

Ergonomics — Recovery model for cyclical industrial work

Human performance in physical environments — Part 1: A performance framework

Safety of machinery — Ergonomic principles for the design of sorting cabins intended for the manual sorting of dry household and similar waste originating from selective collection

Ergonomics — Application of ISO 11226, the ISO 11228 series and ISO/TR 12295 in the agricultural sector

Ergonomics of the thermal environment: Adaptive methods for achieving thermal comfort

Road vehicles — Ergonomic design guidance for external visual communication from automated vehicles to other road users

Information technology — User interface requirements and guidelines on avatars — Part 1: General

Validation protocol for walking speed as extracted from various sensor systems that measure human body motion for the healthcare sector

Ergonomics — Accessible design — Auditory signals for consumer products

Ergonomics — Accessible design — Sound pressure levels of auditory signals for consumer products

Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light

Ergonomics — Accessible design — Tactile dots and bars on consumer products

Ergonomics — Accessible design — Sound pressure levels of spoken announcements for products and public address systems

Ergonomics — Accessible design — Part 1: Colour combinations for young and older people without visual impairments

Ergonomics — Accessible design — Part 2: Colour combinations for people with colour deficiency and low vision

Ergonomics — Accessible design — Method for creating colour combinations taking account of age-related changes in human colour vision

Ergonomics — Accessible design — Guidelines for designing tactile symbols and characters

Ergonomics — Accessible design — A method for estimating minimum legible font size for people at any age

Ergonomics — Accessible design — Indicator lights on consumer products

Ergonomics — Accessible design — Spoken instructions of consumer products

Ergonomics — Accessible design — Accessibility of information presented on visual displays of small consumer products

Ergonomics — Accessible design — Ease of operation

Basic muscular strength measurements for technological design — Part 1: Muscular strength measurements definitions, instrumentation, and protocol

Systems and software engineering — Software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for Usability: User requirements specification

Information technology — User interfaces — Describing whole-body movement sequences

Ageing societies — Accessibility and usability considerations for home healthcare products, related services and environments

Road vehicles — Ergonomic aspects of transport information and control systems — Simulated lane change test to assess in-vehicle secondary task demand

Ergonomics — General approach, principles and concepts

The human-centred organization — Rationale and general principles

The human-centred organization — Guidance for managers

Human-centred organization — Rationale, principles and activities for human-centred quality in develepment of products and services

Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people

Ergonomics of the physical environment — Application of International Standards to people with special requirements

Information Technology — Biometrics — Guide on designing accessible and inclusive biometric systems

Occupational health and safety management — Guidelines for remote working