Iron ores — Determination of tumbler strength

Iron ores — Determination of tumble strength

Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices

Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices

Iron ores (maximum particle size 40 mm or smaller) — Determination of bulk density

Iron ores — Determination of bulk density

Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density

Iron ores — Determination of reducibility

Iron ores — Determination of reducibility

Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index

Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index

Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index

Iron ores — Static test for low-temperature reduction-disintegration — Part 1: Reaction with CO, CO2 and H2

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2

Iron ores — Static test for low-temperature reduction-disintegration — Part 2: Reaction with CO

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2

Iron ores — Low-temperature disintegration test — Method using cold tumbling after static reduction

Iron ore pellets — Determination of relative free-swelling index

Iron ore pellets for blast furnace feedstocks — Determination of the free-swelling index

Iron ore pellets for blast furnace feedstocks — Determination of the free-swelling index

Iron ore pellets — Determination of crushing strength

Iron ore pellets — Determination of crushing strength

Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength

Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength

Iron ores — Determination of bulk density for ores of maximum particle size larger than 40 mm

Iron ores — Determination of relative reducibility

Iron ores — Determination of relative reducibility

Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index

Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index

Iron ores — Determination of reduction properties under load

Iron ores for blast furnace feedstocks — Determination of reduction under load

Iron ores for blast furnace feedstocks — Determination of reduction under load

Iron ores for blast furnace feedstocks — Determination of reduction under load

Iron ore fines — Method for presentation of the results of sintering tests

Iron ores — Determination of decrepitation index

Iron ores for blast furnace feedstocks — Determination of the decrepitation index

Iron ores for blast furnace feedstocks — Determination of the decrepitation index

Iron ores for blast furnace feedstocks — Determination of the decrepitation index

Iron ore pellets — Determination of clustering of feedstock for direct reduction by gas reforming processes

Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index

Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index

Iron ores — Determination of disintegration and metallization of feedstock for direct reduction by gas reforming processes

Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization

Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization

Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization

Iron ores — Determination of reducibility and metallization of feedstock for direct reduction by gas reforming processes

Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization

Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization

Iron ores — Dynamic test for low-temperature reduction-disintegration

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method

Direct reduced iron — Determination of tumble strength of hot briquetted iron (HBI)

Direct reduced iron — Determination of the tumble and abrasion indices of hot briquetted iron (HBI)

Direct reduced iron — Determination of apparent density and water absorption of hot briquetted iron (HBI)

Direct reduced iron — Determination of apparent density and water absorption of hot briquetted iron (HBI)

Iron ores — Determination of specific surface area — Test method using air-permeability apparatus (Blaine)