Ejector pins with cylindrical head — Dimensions

Tools for moulding — Ejector pins with cylindrical head

Tools for moulding — Ejector pins with cylindrical head

Round punches with 60 degrees conical head and straight shank

Tools for pressing — Round punches with 60 degrees conical head and straight shank

Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools, jigs and fixtures

Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools

Tools for pressing and moulding — Machined plates — Part 2: Machined plates for moulds

Machined plates for press tools, moulds, jigs and fixtures — Nominal dimensions

Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered

Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered

Mould guide bushes, headed, and locating guide bushes, headed

Tools for moulding — Guide bushes, headed, and locating guide bushes, headed

Punches with cylindrical head and reduced shank

Tools for pressing — Punches with cylindrical head and reduced shank

Tools for pressing — Punches with cylindrical head and straight or reduced shank

Tools for pressing — Punches with cylindrical head and straight or reduced shank

Round punches with cylindrical head and straight shank

Angle pins — Basic dimensions

Tools for moulding — Angle pins

Tools for moulding — Angle pins

Tools for moulding — Angle pins

Ejector sleeves with cylindrical head — Basic series for general purposes

Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes

Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes

Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes

Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes

Mould bases — Locating elements

Tools for moulding — Mould bases — Round locating elements and spacers

Tools for moulding — Mould bases — Round locating elements and spacers

Tools for pressing and moulding — Round locating elements and spacers

Tools for moulding — Flat ejector pins

Tools for moulding — Flat ejector pins

Tools for moulding — Flat ejector pins

Tools for moulding — Shouldered ejector pins

Tools for moulding — Shouldered ejector pins

Tools for moulding — Shouldered ejector pins

Tools for pressing — Punches — Nomenclature and terminology

Tools for pressing — Punches — Nomenclature and terminology

Tools for pressing — Round matrixes

Tools for pressing — Matrixes

Tools for pressing — Guides for round punches

Tools for pressing — Round punches with 60 degrees conical head and reduced shank

Tools for pressing — Round punches with 60 degrees conical head and reduced shank

Tools for pressing — Guide pillars — Part 1: Types

Tools for pressing — Guide pillars — Part 1: Types

Tools for pressing — Guide pillars — Part 1: Types

Tools for pressing — Guide pillars — Part 2: Type A, straight pillars

Tools for pressing — Guide pillars — Part 2: Type A, straight pillars

Tools for pressing — Guide pillars — Part 2: Type A, straight pillars

Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars

Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars

Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars

Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars

Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush

Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush

Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush

Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush

Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange

Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange

Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange

Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange

Tools for pressing — Wear plates for press dies — Part 1: Type A

Tools for pressing — Wear plates for press dies — Part 1: Type A

Tools for pressing — Wear plates for press dies — Part 2: Type B

Tools for pressing — Wear plates for press dies — Part 2: Type B

Tools for pressing — Guide bushes — Part 1: Forms

Tools for pressing — Guide bushes — Part 1: Forms

Tools for pressing — Guide bushes — Part 1: Forms

Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1

Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1

Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1

Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1

Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1

Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1

Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1

Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1

Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1

Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1

Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1

Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1

Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1

Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1

Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1

Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1

Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1

Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1

Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1

Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1

Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1

Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2

Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2

Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2

Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2

Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2

Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2

Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2

Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2

Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2

Tools for moulding — Centring sleeves

Tools for moulding — Centring sleeves

Tools for pressing — Elastomer pressure springs — Part 1: General specification

Tools for pressing — Elastomer pressure springs — Part 1: General specification

Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories

Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories

Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty

Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty

Tools for pressing — Ball-lock punches — Part 2: Ball-lock punches for heavy duty

Tools for pressing — Ball-lock punches

Tools for moulding — Sprue bushes — Dimensions

Tools for moulding — Sprue bushes — Dimensions

Tools for moulding — Support pillars

Tools for moulding — Support pillars

Tools for pressing — Punch holder shanks — Part 1: Types A and B

Tools for pressing — Punch holder shanks — Part 1: Type A

Tools for pressing — Punch holder shanks — Part 1: Type A

Tools for pressing — Punch holder shanks — Part 2: Type C

Tools for pressing — Punch holder shanks — Part 2: Type C

Tools for pressing — Punch holder shanks — Part 3: Type D

Tools for pressing — Punch holder shanks — Part 3: Type D

Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding

Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding

Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding — Amendment 1

Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding

Tools for moulding — Locating rings — Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds — Types A and B

Tools for moulding — Locating rings — Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)

Tools for moulding — Locating rings — Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)

Tools for pressing — Die sets

Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty

Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty

Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty

Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty

Tools for pressing — Ball-lock punch retainers — Part 3: Type E, reduced for heavy duty

Tools for pressing — Gas springs — Part 1: General specifications

Tools for pressing — Gas springs — Part 1: General specifications

Tools for pressing — Gas springs — Part 1: General specifications

Tools for pressing — Gas springs — Part 2: Specification of accessories

Tools for pressing — Gas springs — Part 2: Specification of accessories

Tools for pressing — Gas springs — Part 2: Specification of accessories

Tools for pressing — Gas springs — Part 2: Specification of accessories

Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact built height

Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact built height

Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height

Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height

Tools for pressing — Gas springs — Part 5: Safety instructions for gas springs

Tools for pressing — Guide pillar mountings

Tools for pressing — Guide pillar mountings

Tools for moulding — Components of compression and injection moulds and diecasting dies — Terms and symbols

Tools for moulding — Components of compression and injection moulds and diecasting dies — List of equivalent terms and symbols

Tools for moulding — Thermal insulating sheets for injection moulds

Tools for pressing — L-shaped guides

Tools for pressing — L-shaped guides

Tools for pressing — Guide plates — U- and V-blocks

Tools for pressing — Guide plates — U- and V-blocks

Tools for pressing — Guide plates — U- and V-blocks

Tools for moulding — Sprue pullers

Tools for moulding — Tool specification sheet for injection moulds

Tools for moulding — Tool specification sheet for injection moulds

Press tools for tablets — Punches and dies

Press tools for tablets — Punches and dies

Tools for pressing — Spring plungers with helicoidal compression steel spring or gas spring

Tools for pressing — Heel guidings in large stamping and forming dies

Tools for pressing — Heel guidings in large stamping and forming dies

Tools for pressing — Vocabulary

Tools for pressing — Sliding plates

Tools for pressing — Sliding plates

Tools for pressing — Cam driver plates

Tools for pressing — Cam driver plates

Tools for pressing — Cam driver plates

Tools for moulding — Tool specification sheet for diecasting dies

Tools for pressing — Trombone head punches

Compression and injection moulds — Components for gating systems