Standards catalogue

IIW

International Institute of Welding

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of IIW Secretariat Stage ICS
ISO 3580:2004 [Withdrawn]
Welding consumables -- Covered electrodes for manual metal arc welding of creep-resisting steels -- Classification
95.99
ISO 3690:2000 [Withdrawn]
Welding and allied processes -- Determination of hydrogen content in ferritic steel arc weld metal
95.99
ISO 3690:2012
Welding and allied processes -- Determination of hydrogen content in arc weld metal
90.92
ISO/NP 3690 [Under development]
Welding and allied processes -- Determination of hydrogen content in arc weld metal
10.99
ISO 6847:2000 [Withdrawn]
Welding consumables -- Deposition of a weld metal pad for chemical analysis
95.99
ISO 6847:2013
Welding consumables -- Deposition of a weld metal pad for chemical analysis
60.60
ISO 8249:2000
Welding -- Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
90.93
ISO 10446:1990 [Withdrawn]
Welding -- All-weld metal test assembly for the classification of corrosion-resisting chromium and chromium-nickel steel covered arc welding electrodes
95.99
ISO 10447:1991 [Withdrawn]
Welding -- Peel and chisel testing of resistance spot, projection and seam welds
95.99
ISO 10447:2006 [Withdrawn]
Resistance welding -- Peel and chisel testing of resistance spot and projection welds
95.99
ISO 10447:2015
Resistance welding -- Testing of welds -- Peel and chisel testing of resistance spot and projection welds
60.60
ISO/TR 13392:2014
Health and safety in welding and allied processes -- Arc welding fume components
60.60
ISO/TR 13393:2009
Welding consumables -- Hardfacing classification -- Microstructures
90.93
ISO 14270:2000 [Withdrawn]
Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
95.99
ISO 14270:2016
Resistance welding -- Destructive testing of welds -- Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
60.60
ISO 14271:2000 [Withdrawn]
Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
95.99
ISO 14271:2011
Resistance welding -- Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
90.92
60.60
ISO/DIS 14271 [Under development]
Resistance welding -- Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
40.60
ISO 14272:2000 [Withdrawn]
Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
95.99
ISO 14272:2016
Resistance welding -- Destructive testing of welds -- Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
60.60
ISO 14273:2000 [Withdrawn]
Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
95.99
ISO 14273:2016
Resistance welding -- Destructive testing of welds -- Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
60.60
ISO 14323:2006 [Withdrawn]
Resistance spot welding and projection welds -- Destructive testing of welds -- Specimen dimensions and procedure for impact shear test and cross-tension testing
95.99
ISO 14323:2015
Resistance welding -- Destructive testing of welds -- Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
60.60
ISO 14324:2003
Resistance spot welding -- Destructive tests of welds -- Method for the fatigue testing of spot welded joints
90.93
ISO 14329:2003
Resistance welding -- Destructive tests of welds -- Failure types and geometric measurements for resistance spot, seam and projection welds
90.93
ISO 14343:2002 [Withdrawn]
Welding consumables -- Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels -- Classification
95.99
ISO 14343:2002/Amd 1:2006 [Withdrawn]
Addition of strip electrodes for submerged arc welding and electroslag welding
95.99
ISO 14344:2002 [Withdrawn]
Welding and allied processes -- Flux and gas shielded electrical welding processes -- Procurement guidelines for consumables
95.99
ISO/TR 14345:2012
Fatigue -- Fatigue testing of welded components -- Guidance
60.60
ISO 14346:2013
Static design procedure for welded hollow-section joints -- Recommendations
60.60
ISO 14347:2008
Fatigue -- Design procedure for welded hollow-section joints -- Recommendations
90.93
ISO 14372:2000 [Withdrawn]
Welding consumables -- Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
95.99
ISO 14372:2011
Welding consumables -- Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
90.93
ISO 14373:2006 [Withdrawn]
Resistance welding -- Procedure for spot welding of uncoated and coated low carbon steels
95.99
ISO 14373:2015
Resistance welding -- Procedure for spot welding of uncoated and coated low carbon steels
60.60
ISO 16432:2006
Resistance welding -- Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)
90.93
ISO 16433:2006
Resistance welding -- Procedure for seam welding of uncoated and coated low carbon steels
90.93
ISO 18211:2016
Non-destructive testing -- Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation
60.60
ISO/DIS 18785-1 [Under development]
Friction stir spot welding -- Aluminium -- Part 1: Terminology
40.60
ISO/DIS 18785-2 [Under development]
Friction stir spot welding -- Aluminium -- Part 2: Design of weld joints
40.60
ISO/DIS 18785-3 [Under development]
Friction stir spot welding -- Aluminium -- Part 3: Qualification of welding operators
40.60
ISO/DIS 18785-4 [Under development]
Friction stir spot welding -- Aluminium -- Part 4: Specification and qualification of welding procedures
40.60
ISO/DIS 18785-5 [Under development]
Friction stir spot welding -- Aluminium -- Part 5: Quality and inspection requirements
40.60
ISO/TR 18786:2014
Health and safety in welding -- Guidelines for risk assessment of welding fabrication activities
60.60
ISO 19675:2017
Non-destructive testing -- Ultrasonic testing -- Specification for a calibration block for phased array testing (PAUT)
60.60
ISO/PRF TS 20273 [Under development]
Guidelines on weld quality in relationship to fatigue strength
50.00
ISO/TR 22824:2003
Welding consumables -- Predicted and measured FN in specifications -- A position statement of the experts of IIW Commission IX
90.93
ISO 24497-1:2007
Non-destructive testing -- Metal magnetic memory -- Part 1: Vocabulary
90.92
ISO/NP 24497-1 [Under development]
Non-destructive testing -- Metal magnetic memory -- Part 1: Vocabulary
10.99
ISO 24497-2:2007
Non-destructive testing -- Metal magnetic memory -- Part 2: General requirements
90.92
ISO/NP 24497-2 [Under development]
Non-destructive testing -- Metal magnetic memory -- Part 2: General requirements
10.99
ISO 24497-3:2007
Non-destructive testing -- Metal magnetic memory -- Part 3: Inspection of welded joints
90.92
ISO/NP 24497-3 [Under development]
Non-destructive testing -- Metal magnetic memory -- Part 3: Inspection of welded joints
10.99
ISO 25239-1:2011
Friction stir welding -- Aluminium -- Part 1: Vocabulary
90.92
ISO/NP 25239-1 [Under development]
Friction stir welding -- Aluminium -- Part 1: Vocabulary
10.99
ISO 25239-2:2011
Friction stir welding -- Aluminium -- Part 2: Design of weld joints
90.92
ISO/NP 25239-2 [Under development]
Friction stir welding -- Aluminium -- Part 2: Design of weld joints
10.99
ISO 25239-3:2011
Friction stir welding -- Aluminium -- Part 3: Qualification of welding operators
90.92
ISO/NP 25239-3 [Under development]
Friction stir welding -- Aluminium -- Part 3: Qualification of welding operators
10.99
ISO 25239-4:2011
Friction stir welding -- Aluminium -- Part 4: Specification and qualification of welding procedures
90.92
ISO/NP 25239-4 [Under development]
Friction stir welding -- Aluminium -- Part 4: Specification and qualification of welding procedures
10.99
ISO 25239-5:2011
Friction stir welding -- Aluminium -- Part 5: Quality and inspection requirements
90.92
ISO/NP 25239-5 [Under development]
Friction stir welding -- Aluminium -- Part 5: Quality and inspection requirements
10.99

No matching records found