Standards catalogue

ISO/TC 138/SC 6

Reinforced plastics pipes and fittings for all applications

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 138/SC 6 Secretariat Stage ICS
ISO 7370:1983 [Withdrawn]
Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings -- Nominal diameters, specified diameters and standard lengths
95.99
ISO 7432:2002
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
90.92
ISO/DIS 7432.2 [Under development]
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
40.60
ISO 7509:2000 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure
95.99
ISO 7509:2015
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure
60.60
ISO 7510:1997 [Withdrawn]
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method
95.99
ISO 7510:2017
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents
60.60
ISO 7511:1999
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure
90.93
ISO 7684:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions
90.93
ISO 7685:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
90.92
ISO/WD 7685 [Under development]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
20.20
ISO 8483:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints
90.92
60.60
ISO/DIS 8483 [Under development]
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints
40.60
ISO 8513:2000 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of longitudinal tensile properties
95.99
ISO 8513:2014 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial longitudinal tensile strength
95.99
ISO 8513:2016
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the initial longitudinal tensile strength
60.60
ISO 8521:1998 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the apparent initial circumferential tensile strength
95.99
ISO 8521:2009
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial circumferential tensile strength
90.92
ISO/NP 8521 [Under development]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial circumferential tensile strength
10.99
ISO 8533:2003
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of cemented or wrapped joints
90.92
60.60
ISO/DIS 8533 [Under development]
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test method to prove the design of cemented or wrapped joints
40.60
ISO 8572:1991 [Withdrawn]
Pipes and fittings made of glass-reinforced thermosetting plastics (GRP) -- Definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing
95.99
ISO 8639:2000 [Withdrawn]
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods for leaktightness of flexible joints
95.99
ISO 8639:2016
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods for leaktightness and proof of structural design of flexible joints
60.60
ISO/TR 10465-1:1993 [Withdrawn]
Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes -- Part 1: Installation procedures
95.99
ISO/TS 10465-1:2007
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 1: Installation procedures
90.93
ISO/TR 10465-2:1999 [Withdrawn]
Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes -- Part 2: Comparison of static calculation methods
95.99
ISO/TR 10465-2:2007
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 2: Comparison of static calculation methods
90.93
ISO/TR 10465-3:1999 [Withdrawn]
Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes -- Part 3: Installation parameters and application limits
95.99
ISO/TR 10465-3:2007
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 3: Installation parameters and application limits
90.93
ISO 10466:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection
90.93
ISO 10467:2004
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
90.92
60.60
ISO/DIS 10467 [Under development]
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
40.93
ISO 10468:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor
90.92
60.60
ISO/DIS 10468 [Under development]
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the ring creep properties under wet or dry conditions
40.60
ISO 10471:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
90.92
60.60
ISO/DIS 10471 [Under development]
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
40.60
ISO 10639:2004 [Withdrawn]
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
95.99
95.99
ISO 10639:2017
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
60.60
ISO 10928:1997 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use
95.99
ISO 10928:2009 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use
95.99
95.99
ISO 10928:2016
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use
60.60
ISO 10952:1999 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack from the inside of a section in a deflected condition
95.99
ISO 10952:2008 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition
95.99
ISO 10952:2014
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition
60.60
ISO/NP TS 10986 [Under development]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- System design of above ground pipe and joint installations without end thrust
10.99
ISO/TS 12512:2017
Glass reinforced thermosetting plastic (GRP) pipes -- Determination of initial specific ring stiffness using segment test species cut from a pipe
60.60
ISO 14828:2003 [Withdrawn]
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
95.99
95.99
ISO 15306:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure
90.93
60.60
ISO 16611:2017
Plastics piping systems for drainage and sewerage without pressure -- Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) -- Dimensions, requirements and tests
60.60
ISO 18672-1:2009
Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints
90.93
ISO 18851:2015
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test method to prove the structural design of fittings
60.60
ISO/TS 20656-1:2017
Plastics piping systems -- General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes -- Part 1: Buried pipes
60.60
ISO 25780:2011
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques
90.92

No matching records found