• Filter:

  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 131/SC 5 Secretariat Stage ICS
ISO 4400:1994
Fluid power systems and components — Three-pin electrical plug connectors with earth contact — Characteristics and requirements
90.93
ISO 4401:1980
Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
95.99
ISO 4401:1994
Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
95.99
ISO 4401:2005
Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
90.93
ISO 4411:1986
Hydraulic fluid power — Valves — Determination of pressure differential/flow characteristics
95.99
ISO 4411:2008
Hydraulic fluid power — Valves — Determination of pressure differential/flow characteristics
95.99
ISO 4411:2019
Hydraulic fluid power — Valves — Determination of differential pressure/flow rate characteristics
60.60
ISO 5599-1:1989
Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector
95.99
ISO 5599-1:2001
Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector
90.93
ISO 5599-1:2001/Cor 1:2007
Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector — Technical Corrigendum 1
60.60
ISO 5599-2:1990
Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector
95.99
ISO 5599-2:2001
Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector
90.93
ISO 5599-2:2001/Amd 1:2004
Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector — Amendment 1
60.60
ISO 5599-2:2001/Cor 1:2007
Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector — Technical Corrigendum 1
60.60
ISO 5599-3:1990
Pneumatic fluid power — Five-port directional control valves — Part 3: Code system for communication of valve functions
95.99
ISO 5781:1987
Hydraulic fluid power — Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces
95.99
ISO 5781:2000
Hydraulic fluid power — Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces
95.99
ISO 5781:2016
Hydraulic fluid power — Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces
60.60
ISO 5782-1:1990
Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in commercial literature and specific requirements
95.99
ISO 5782-1:1997
Pneumatic fluid power — Compressed-air filters — Part 1: Main characteristics to be included in suppliers' literature and product marking requirements
95.99
ISO 5782-1:2017
Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
60.60
ISO 5782-2:1997
Pneumatic fluid power — Compressed-air filters — Part 2: Test methods to determine the main characteristics to be included in supplier's literature
90.20
ISO 5783:1981
Hydraulic fluid power — Code for identification of valve mounting surfaces
95.99
ISO 5783:1995
Hydraulic fluid power — Code for identification of valve mounting surfaces and cartridge valve cavities
95.99
ISO 5783:2019
Hydraulic fluid power — Code for identification of valve mounting surfaces and cartridge valve cavities
60.60
ISO 5784-1:1988
Fluid power systems and components — Fluid logic circuits — Part 1: Symbols for binary logic and related functions
95.99
ISO 5784-2:1989
Fluid power systems and components — Fluid logic circuits — Part 2: Symbols for supply and exhausts as related to logic symbols
95.99
ISO 5784-3:1989
Fluid power systems and components — Fluid logic circuits — Part 3: Symbols for logic sequencers and related functions
95.99
ISO 6263:1987
Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
95.99
ISO 6263:1997
Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
95.99
ISO 6263:2013
Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
90.93
ISO 6264:1987
Hydraulic fluid power — Pressure-relief valves — Mounting surfaces
95.99
ISO 6264:1998
Hydraulic fluid power — Pressure-relief valves — Mounting surfaces
90.93
ISO 6301-1:1989
Pneumatic fluid power — Compressed air lubricators — Part 1: Main characteristics to be included in commercial literature and specific requirements
95.99
ISO 6301-1:1997
Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
95.99
ISO 6301-1:2009
Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
95.99
ISO 6301-1:2017
Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
60.60
ISO 6301-2:1997
Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier's literature
95.99
ISO 6301-2:2006
Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier's literature
95.99
ISO 6301-2:2018
Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier's literature
60.60
ISO 6358-1:2013
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow
90.93
ISO 6358-1:2013/DAmd 1
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow — Amendment 1: Effective conductance
40.99
ISO 6358-2:2013
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 2: Alternative test methods
95.99
ISO 6358-2:2019
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 2: Alternative test methods
60.60
ISO 6358-3:2014
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 3: Method for calculating steady-state flow-rate characteristics of systems
90.20
ISO 6952:1989
Fluid power systems and components — Two-pin electrical plug connector with earth contact — Characteristics and requirements
95.99
ISO 6952:1994
Fluid power systems and components — Two-pin electrical plug connectors with earth contact — Characteristics and requirements
90.93
ISO 6953-1:1990
Pneumatic fluid power — Air line pressure regulators — Part 1: Main characteristics to be included in commercial literature and specific requirements
95.99
ISO 6953-1:2000
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
95.99
ISO 6953-1:2000/Cor 1:2006
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements — Technical Corrigendum 1
95.99
ISO 6953-1:2015
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
60.60
ISO 6953-2:2000
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
95.99
ISO 6953-2:2015
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
60.60
ISO 6953-3:2012
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
90.93
ISO 7368:1989
Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities
95.99
ISO 7368:2016
Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities
60.60
ISO 7789:1998
Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities
95.99
ISO 7789:1998/Cor 1:1999
Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities — Technical Corrigendum 1
95.99
ISO 7789:2007
Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities
90.93
ISO 7790:1986
Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 03 and 05 — Clamping dimensions
95.99
ISO 7790:1997
Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 — Clamping dimensions
95.99
ISO 7790:2013
Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 — Clamping dimensions
90.93
ISO 8778:2003
Pneumatic fluid power — Standard reference atmosphere
90.93
ISO 9461:1992
Hydraulic fluid power — Identification of valve ports, subplates, control devices and solenoids
90.93
ISO 10041-1:2010
Pneumatic fluid power — Electro-pneumatic continuous flow control valves — Part 1: Main characteristics to include in the supplier's literature
90.93
ISO 10041-2:2010
Pneumatic fluid power — Electro-pneumatic continuous flow control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature
90.93
ISO 10094-1:2010
Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 1: Main characteristics to include in the supplier's literature
90.92
ISO 10094-2:2010
Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature
90.92
ISO/CD 10094-2
Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature
30.60
ISO/DIS 10094-1
Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 1: Main characteristics to include in the supplier's literature
40.99
ISO 10372:1992
Hydraulic fluid power — Four- and five-port servovalves — Mounting surfaces
90.93
ISO 11727:1999
Pneumatic fluid power — Identification of ports and control mechanisms of control valves and other components
90.93
ISO 12238:2001
Pneumatic fluid power — Directional control valves — Measurement of shifting time
90.92
ISO/AWI 12238
Pneumatic fluid power — Directional control valves — Measurement of shifting time
20.00
ISO 15217:2000
Fluid power systems and components — 16 mm square electrical connector with earth contact — Characteristics and requirements
90.93
ISO 15218:2003
Pneumatic fluid power — 3/2 solenoid valves — Mounting interface surfaces
90.93
ISO 15407-1:2000
Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 1: Mounting interface surfaces without electrical connector
90.93
ISO 15407-2:2003
Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector
90.93
ISO 16873:2002
Hydraulic fluid power — Pressure switches — Mounting surfaces
95.99
ISO 16873:2002/Amd 1:2005
Hydraulic fluid power — Pressure switches — Mounting surfaces — Amendment 1
95.99
ISO 16873:2011
Hydraulic fluid power — Pressure switches — Mounting surfaces
90.93
ISO 16874:2004
Hydraulic fluid power — Identification of manifold assemblies and their components
90.20
ISO 17082:2004
Pneumatic fluid power — Valves — Data to be included in supplier literature
90.93
ISO/TR 17209:2013
Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities with ISO 725 (UN and UNF) threads
60.60
ISO 20145
Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers
60.00
ISO 20401:2005
Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
95.99
ISO 20401:2005/Cor 1:2005
Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm — Technical Corrigendum 1
95.99
ISO 20401:2017
Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
60.60

No matching records found. Please try changing the filter settings.