Standards catalogue

ISO/TC 79/SC 2

Organic and anodic oxidation coatings on aluminium

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 79/SC 2 Secretariat Stage ICS
ISO 2085:1976 [Withdrawn]
Anodizing of aluminium and its alloys -- Check of continuity of thin anodic oxide coatings -- Copper sulphate test
95.99
ISO 2085:2010
Anodizing of aluminium and its alloys -- Check for continuity of thin anodic oxidation coatings -- Copper sulfate test
90.92
ISO/CD 2085 [Under development]
Anodizing of aluminium and its alloys -- Check for continuity of thin anodic oxidation coatings -- Copper sulfate test
30.99
ISO 2106:1982 [Withdrawn]
Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxide coatings -- Gravimetric method
95.99
95.99
ISO 2106:2011
Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxidation coatings -- Gravimetric method
90.92
ISO/CD 2106 [Under development]
Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxidation coatings -- Gravimetric method
30.99
ISO 2128:1976 [Withdrawn]
Anodizing of aluminium and its alloys -- Determination of thickness of anodic oxide coatings -- Non-destructive measurement by split-beam microscope
95.99
ISO 2128:2010
Anodizing of aluminium and its alloys -- Determination of thickness of anodic oxidation coatings -- Non-destructive measurement by split-beam microscope
90.93
ISO 2135:1984 [Withdrawn]
Anodizing of aluminium and its alloys -- Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
95.99
ISO 2135:2010
Anodizing of aluminium and its alloys -- Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
90.92
ISO/DIS 2135 [Under development]
Anodizing of aluminium and its alloys -- Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
40.60
ISO 2143:1981 [Withdrawn]
Anodizing of aluminium and its alloys -- Estimation of loss of absorptive power of anodic oxide coatings after sealing -- Dye spot test with prior acid treatment
95.99
ISO 2143:2010
Anodizing of aluminium and its alloys -- Estimation of loss of absorptive power of anodic oxidation coatings after sealing -- Dye-spot test with prior acid treatment
90.92
ISO/DIS 2143 [Under development]
Anodizing of aluminium and its alloys -- Estimation of loss of absorptive power of anodic oxidation coatings after sealing -- Dye-spot test with prior acid treatment
40.60
ISO 2376:1972 [Withdrawn]
Anodization (anodic oxidation) of aluminium and its alloys -- Insulation check by measurement of breakdown potential
95.99
ISO 2376:2010
Anodizing of aluminium and its alloys -- Determination of electric breakdown potential
90.92
ISO/CD 2376 [Under development]
Anodizing of aluminium and its alloys -- Determination of electric breakdown potential
30.99
ISO 2767:1973 [Withdrawn]
Surface treatments of metals -- Anodic oxidation of aluminium and its alloys -- Specular reflectance at 45 degrees -- Total reflectance -- Image clarity
95.99
ISO 2931:1983 [Withdrawn]
Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance
95.99
ISO 2931:2010
Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
90.92
ISO/DIS 2931 [Under development]
Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
40.20
ISO 2932:1981 [Withdrawn]
Anodizing of aluminium and its alloys -- Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution
95.99
ISO 3210:1983 [Withdrawn]
Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution
95.99
ISO 3210:2010
Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution
90.92
ISO/DIS 3210.2 [Under development]
Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
40.60
ISO 3211:1977 [Withdrawn]
Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxide coatings to cracking by deformation
95.99
ISO 3211:2010
Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to cracking by deformation
90.92
ISO/CD 3211 [Under development]
Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to cracking by deformation
30.99
ISO 5190:1984 [Withdrawn]
Anodizing of aluminium and its alloys -- Evaluation of uniformity of appearance of architectural anodic finishes -- Determination of diffuse reflectance and specular gloss
95.99
ISO 6581:1980 [Withdrawn]
Anodizing of aluminium and its alloys -- Determination of the fastness to ultra-violet light of coloured anodic oxide coatings
95.99
ISO 6581:2010
Anodizing of aluminium and its alloys -- Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
90.92
ISO/CD 6581 [Under development]
Anodizing of aluminium and its alloys -- Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
30.99
ISO 6719:1986 [Withdrawn]
Anodized aluminium and aluminium alloys -- Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
95.99
ISO 6719:2010
Anodizing of aluminium and its alloys -- Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
90.93
ISO 7583:1986 [Withdrawn]
Anodizing of aluminium and its alloys -- Vocabulary
95.99
ISO 7583:2013
Anodizing of aluminium and its alloys -- Terms and definitions
60.60
ISO 7599:1983 [Withdrawn]
Anodizing of aluminium and its alloys -- General specifications for anodic oxide coatings on aluminium
95.99
ISO 7599:2010
Anodizing of aluminium and its alloys -- General specifications for anodic oxidation coatings on aluminium
90.92
ISO/DIS 7599 [Under development]
Anodizing of aluminium and its alloys -- Method for specifying decorative and protective anodic oxidation coatings on aluminium
40.20
ISO 7668:1986 [Withdrawn]
Anodized aluminium and aluminium alloys -- Measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
95.99
ISO 7668:2010
Anodizing of aluminium and its alloys -- Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
90.92
ISO/CD 7668 [Under development]
Anodizing of aluminium and its alloys -- Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
30.99
ISO 7669:1986 [Withdrawn]
Anodized aluminium and aluminium alloys -- Measurement of total reflectivity using a photoelectric reflectometer
95.99
ISO 7759:1983 [Withdrawn]
Anodizing of aluminium and its alloys -- Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
95.99
ISO 7759:2010
Anodizing of aluminium and its alloys -- Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
90.93
ISO/TR 8125:1984 [Withdrawn]
Anodizing of aluminium and its alloys -- Determination of colour and colour difference of coloured anodic coatings
95.99
ISO 8251:1987 [Withdrawn]
Anodized aluminium and aluminium alloys -- Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
95.99
ISO 8251:2011
Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings
90.92
ISO/CD 8251 [Under development]
Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings
30.99
ISO 8252:1987 [Withdrawn]
Anodized aluminium and aluminium alloys -- Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
95.99
ISO 8993:1989 [Withdrawn]
Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Chart method
95.99
ISO 8993:2010
Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Chart method
90.92
ISO/CD 8993 [Under development]
Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Chart method
30.99
ISO 8994:1989 [Withdrawn]
Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Grid method
95.99
ISO 8994:2011
Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Grid method
90.92
ISO/CD 8994 [Under development]
Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Grid method
30.99
ISO 10074:1994 [Withdrawn]
Specification for hard anodic oxidation coatings on aluminium and its alloys
95.99
ISO 10074:2010
Anodizing of aluminium and its alloys -- Specification for hard anodic oxidation coatings on aluminium and its alloys
90.92
ISO/DIS 10074 [Under development]
Anodizing of aluminium and its alloys -- Specification for hard anodic oxidation coatings on aluminium and its alloys
40.20
ISO 10215:1992 [Withdrawn]
Anodized aluminium and aluminium alloys -- Visual determination of image clarity of anodic oxidation coatings -- Chart scale method
95.99
ISO 10215:2010
Anodizing of aluminium and its alloys -- Visual determination of image clarity of anodic oxidation coatings -- Chart scale method
90.92
ISO/CD 10215 [Under development]
Anodizing of aluminium and its alloys -- Visual determination of image clarity of anodic oxidation coatings -- Chart scale method
30.99
ISO 10216:1992 [Withdrawn]
Anodized aluminium and aluminium alloys -- Instrumental determination of image clarity of anodic oxidation coatings -- Instrumental method
95.99
ISO 10216:2010
Anodizing of aluminium and its alloys -- Instrumental determination of image clarity of anodic oxidation coatings -- Instrumental method
90.92
60.60
ISO/DIS 10216 [Under development]
Anodizing of aluminium and its alloys -- Instrumental determination of image clarity of anodic oxidation coatings -- Instrumental method
40.60
ISO/TR 11728:1993 [Withdrawn]
Anodized aluminium and aluminium alloys -- Accelerated test of weather fastness of coloured anodic oxide coatings using cyclic artificial light and pollution gas
95.99
ISO/WD TS 16688 [Under development]
Guideline for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
20.20
ISO/TR 16689:2012
Anodizing of aluminium and its alloys -- Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid/chromic acid immersion test -- Evaluation of correlations
60.60
ISO 28340:2013
Combined coatings on aluminium -- General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
60.60

No matching records found