Standards catalogue

ISO/TC 69/SC 6

Measurement methods and results

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 69/SC 6 Secretariat Stage ICS
ISO 5725:1986 [Withdrawn]
Precision of test methods -- Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
95.99
ISO 5725-1:1994
Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
90.93
60.60
ISO 5725-2:1994
Accuracy (trueness and precision) of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
90.92
60.60
ISO/DIS 5725-2 [Under development]
Accuracy (trueness and precision) of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
40.60
ISO 5725-3:1994
Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method
90.60
60.60
ISO/WD 5725-3 [Under development]
Accuracy (trueness and precision) of measurement methods and results -- Part 3: Alternative designs for accuracy studies
20.20
ISO 5725-4:1994
Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method
90.92
ISO/DIS 5725-4 [Under development]
Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method
40.60
ISO 5725-5:1998
Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method
90.93
60.60
ISO 5725-6:1994
Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values
90.93
60.60
ISO 10576-1:2003
Statistical methods -- Guidelines for the evaluation of conformity with specified requirements -- Part 1: General principles
90.93
ISO 10725:2000
Acceptance sampling plans and procedures for the inspection of bulk materials
90.93
ISO 11095:1996
Linear calibration using reference materials
90.93
ISO 11648-1:2003
Statistical aspects of sampling from bulk materials -- Part 1: General principles
90.60
ISO 11648-2:2001
Statistical aspects of sampling from bulk materials -- Part 2: Sampling of particulate materials
90.93
ISO 11843-1:1997
Capability of detection -- Part 1: Terms and definitions
90.20
60.60
ISO 11843-2:2000
Capability of detection -- Part 2: Methodology in the linear calibration case
90.93
60.60
ISO 11843-3:2003
Capability of detection -- Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
90.20
ISO 11843-4:2003
Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value
90.93
ISO 11843-5:2008
Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases
90.93
60.60
ISO 11843-6:2013 [Withdrawn]
Capability of detection -- Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
95.99
ISO 11843-6:2019
Capability of detection -- Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
60.60
ISO 11843-7:2012 [Withdrawn]
Capability of detection -- Part 7: Methodology based on stochastic properties of instrumental noise
95.99
ISO 11843-7:2018
Capability of detection -- Part 7: Methodology based on stochastic properties of instrumental noise
60.60
ISO 13528:2005 [Withdrawn]
Statistical methods for use in proficiency testing by interlaboratory comparisons
95.99
ISO 13528:2015
Statistical methods for use in proficiency testing by interlaboratory comparison
60.60
ISO/TR 13587:2012
Three statistical approaches for the assessment and interpretation of measurement uncertainty
60.60
ISO/TS 17503:2015
Statistical methods of uncertainty evaluation -- Guidance on evaluation of uncertainty using two-factor crossed designs
90.60
ISO 21748:2010 [Withdrawn]
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
95.99
ISO 21748:2017
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
60.60
ISO/TS 21748:2004 [Withdrawn]
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
95.99
ISO/TS 21749:2005
Measurement uncertainty for metrological applications -- Repeated measurements and nested experiments
90.60
ISO/TR 22971:2005
Accuracy (trueness and precision) of measurement methods and results -- Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
60.60
ISO/WD TS 23471 [Under development]
Experimental designs for evaluation of uncertainty -- Use of factorial designs for determining uncertainty functions
20.20
ISO/AWI 24185 [Under development]
The evaluation of the uncertainty of measurements from an autocorrelated process
20.00
ISO/WD TS 27878 [Under development]
Reproducibility of the LOD of binary methods in collaborative and in-house validation studies
20.20
ISO/TS 28037:2010
Determination and use of straight-line calibration functions
90.60
ISO/TS 28038:2018
Determination and use of polynomial calibration functions
60.60

No matching records found