Standards catalogue

ISO/TC 61/SC 5

Physical-chemical properties

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 61/SC 5 Secretariat Stage ICS
ISO/TTA 4:2002 [Withdrawn]
Measurement of thermal conductivity of thin films on silicon substrates
95.99
ISO 171:1980
Plastics -- Determination of bulk factor of moulding materials
90.93
ISO 489:1999
Plastics -- Determination of refractive index
90.93
ISO 1133:1991 [Withdrawn]
Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
95.99
ISO 1133:1997 [Withdrawn]
Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
95.99
ISO 1133:2005 [Withdrawn]
Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
95.99
95.99
ISO 1133-1:2011
Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 1: Standard method
90.93
ISO 1133-2:2011
Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 2: Method for materials sensitive to time-temperature history and/or moisture
90.93
ISO 1183:1987 [Withdrawn]
Plastics -- Methods for determining the density and relative density of non-cellular plastics
95.99
ISO 1183-1:2004 [Withdrawn]
Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method
95.99
ISO 1183-1:2012
Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method
90.92
ISO/CD 1183-1 [Under development]
Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method
30.99
ISO 1183-2:2004
Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method
90.92
ISO/CD 1183-2 [Under development]
Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method
30.99
ISO 1183-3:1999
Plastics -- Methods for determining the density of non-cellular plastics -- Part 3: Gas pyknometer method
90.93
ISO 1218:1975 [Withdrawn]
Plastics -- Polyamides -- Determination of "melting point"
95.99
ISO 1325:1973 [Withdrawn]
Plastics -- Determination of electrical properties of thin sheet and film
95.99
ISO 1628-1:1998 [Withdrawn]
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 1: General principles
95.99
ISO 1628-1:2009
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 1: General principles
90.93
60.60
ISO 1675:1985
Plastics -- Liquid resins -- Determination of density by the pyknometer method
90.93
ISO 2555:1989
Plastics -- Resins in the liquid state or as emulsions or dispersions -- Determination of apparent viscosity by the Brookfield Test method
90.92
ISO/DIS 2555 [Under development]
Plastics -- Resins in the liquid state or as emulsions or dispersions -- Determination of apparent viscosity using a single cylinder type rotational viscometer method
40.60
ISO 2556:1974
Plastics -- Determination of the gas transmission rate of films and thin sheets under atmospheric pressure -- Manometric method
90.93
ISO 2561:1974 [Withdrawn]
Plastics -- Determination of residual styrene monomer in polystyrene by gas chromatography
95.99
ISO 3146:1985 [Withdrawn]
Plastics -- Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers
95.99
ISO 3146:2000
Plastics -- Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
90.93
60.60
ISO 3451-1:1981 [Withdrawn]
Plastics -- Determination of ash -- Part 1: General methods
95.99
ISO 3451-1:1997 [Withdrawn]
Plastics -- Determination of ash -- Part 1: General methods
95.99
ISO 3451-1:2008
Plastics -- Determination of ash -- Part 1: General methods
90.92
ISO/CD 3451-1 [Under development]
Plastics -- Determination of ash -- Part 1: General methods
30.60
ISO 3451-2:1984 [Withdrawn]
Plastics -- Determination of ash -- Part 2: Polyalkylene terephthalates
95.99
ISO 3451-2:1998
Plastics -- Determination of ash -- Part 2: Poly(alkylene terephthalate) materials
90.93
ISO 3451-3:1984
Plastics -- Determination of ash -- Part 3: Unplasticized cellulose acetate
90.93
ISO 3451-4:1986 [Withdrawn]
Plastics -- Determination of ash -- Part 4: Polyamides
95.99
ISO 3451-4:1998
Plastics -- Determination of ash -- Part 4: Polyamides
90.93
ISO 3451-5:1989 [Withdrawn]
Plastics -- Determination of ash -- Part 5: Poly(vinyl chloride)
95.99
ISO 3451-5:2002
Plastics -- Determination of ash -- Part 5: Poly(vinyl chloride)
90.93
ISO 3915:1981
Plastics -- Measurement of resistivity of conductive plastics
90.93
ISO 4581:1987 [Withdrawn]
Plastics -- Styrene/acrylonitrile copolymers -- Determination of residual acrylonitrile monomer content -- Gas chromatography method
95.99
ISO 4581:1994
Plastics -- Styrene/acrylonitrile copolymers -- Determination of residual acrylonitrile monomer content -- Gas chromatography method
90.93
ISO 6401:1985 [Withdrawn]
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer -- Gas chromatographic method
95.99
ISO 6401:2008
Plastics -- Poly(vinyl chloride) -- Determination of residual vinyl chloride monomer -- Gas-chromatographic method
90.93
ISO 6427:1982 [Withdrawn]
Plastics -- Determination of matter extractable by organic solvents (conventional methods)
95.99
ISO 6427:1992 [Withdrawn]
Plastics -- Determination of matter extractable by organic solvents (conventional methods)
95.99
ISO 6427:2013
Plastics -- Determination of matter extractable by organic solvents (conventional methods)
60.60
ISO 6721-1:2011
Plastics -- Determination of dynamic mechanical properties -- Part 1: General principles
90.92
ISO/CD 6721-1 [Under development]
Plastics -- Determination of dynamic mechanical properties -- Part 1: General principles
30.60
ISO 6721-2:2008
Plastics -- Determination of dynamic mechanical properties -- Part 2: Torsion-pendulum method
90.92
ISO/CD 6721-2 [Under development]
Plastics -- Determination of dynamic mechanical properties -- Part 2: Torsion-pendulum method
30.60
ISO 6721-3:1994
Plastics -- Determination of dynamic mechanical properties -- Part 3: Flexural vibration -- Resonance-curve method
90.93
ISO 6721-4:2008
Plastics -- Determination of dynamic mechanical properties -- Part 4: Tensile vibration -- Non-resonance method
90.92
ISO/CD 6721-4 [Under development]
Plastics -- Determination of dynamic mechanical properties -- Part 4: Tensile vibration -- Non-resonance method
30.60
ISO 6721-5:1996
Plastics -- Determination of dynamic mechanical properties -- Part 5: Flexural vibration -- Non-resonance method
90.92
ISO/CD 6721-5 [Under development]
Plastics -- Determination of dynamic mechanical properties -- Part 5: Flexural vibration -- Non-resonance method
30.60
ISO 6721-6:1996
Plastics -- Determination of dynamic mechanical properties -- Part 6: Shear vibration -- Non-resonance method
90.92
ISO/CD 6721-6 [Under development]
Plastics -- Determination of dynamic mechanical properties -- Part 6: Shear vibration -- Non-resonance method
30.60
ISO 6721-7:1996
Plastics -- Determination of dynamic mechanical properties -- Part 7: Torsional vibration -- Non-resonance method
90.92
ISO/CD 6721-7 [Under development]
Plastics -- Determination of dynamic mechanical properties -- Part 7: Torsional vibration -- Non-resonance method
30.60
ISO 6721-8:1997
Plastics -- Determination of dynamic mechanical properties -- Part 8: Longitudinal and shear vibration -- Wave-propagation method
90.92
ISO/CD 6721-8 [Under development]
Plastics -- Determination of dynamic mechanical properties -- Part 8: Longitudinal and shear vibration -- Wave-propagation method
30.99
ISO 6721-9:1997
Plastics -- Determination of dynamic mechanical properties -- Part 9: Tensile vibration -- Sonic-pulse propagation method
90.92
ISO/CD 6721-9 [Under development]
Plastics -- Determination of dynamic mechanical properties -- Part 9: Tensile vibration -- Sonic-pulse propagation method
30.99
ISO 6721-10:2015
Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
90.93
ISO 6721-11:2012
Plastics -- Determination of dynamic mechanical properties -- Part 11: Glass transition temperature
90.92
ISO/CD 6721-11 [Under development]
Plastics -- Determination of dynamic mechanical properties -- Part 11: Glass transition temperature
30.00
ISO 7059:1982
Caprolactam for industrial use -- Determination of absorbance at a wavelength of 290 nm
90.93
ISO 7060:1982 [Withdrawn]
Caprolactam for industrial use -- Determination of crystallizing point
95.99
ISO 7111:1987 [Withdrawn]
Plastics -- Thermogravimetry of polymers -- Temperature scanning method
95.99
ISO 8112:1984
Caprolactam for industrial use -- Determination of colour of 50 % aqueous caprolactam solution, expressed in Hazen units (platinum-cobalt scale) -- Spectrometric method
90.93
ISO 8660:1988 [Withdrawn]
Caprolactam for industrial use -- Determination of permanganate index -- Spectrometric method
95.99
ISO 8660:2002
Plastics -- Determination of permanganate absorption number of caprolactam -- Spectrometric method
90.93
ISO 8661:1988
Caprolactam for industrial use -- Determination of volatile bases content -- Titrimetric method after distillation
90.93
ISO 10927:2011
Plastics -- Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
90.92
ISO/DIS 10927 [Under development]
Plastics -- Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
40.60
ISO 11337:2004 [Withdrawn]
Plastics -- Polyamides -- Determination of e-caprolactam and w-laurolactam by gas chromatography
95.99
95.99
ISO 11337:2010
Plastics -- Polyamides -- Determination of e-caprolactam and w-laurolactam by gas chromatography
90.93
ISO 11357-1:1997 [Withdrawn]
Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles
95.99
ISO 11357-1:2009 [Withdrawn]
Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles
95.99
ISO 11357-1:2016
Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles
60.60
ISO 11357-2:1999 [Withdrawn]
Plastics -- Differential scanning calorimetry (DSC) -- Part 2: Determination of glass transition temperature
95.99
ISO 11357-2:2013
Plastics -- Differential scanning calorimetry (DSC) -- Part 2: Determination of glass transition temperature and glass transition step height
60.60
ISO 11357-3:1999 [Withdrawn]
Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization
95.99
95.99
ISO 11357-3:2011
Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization
90.92
ISO/FDIS 11357-3 [Under development]
Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization
50.00
ISO 11357-4:2005 [Withdrawn]
Plastics -- Differential scanning calorimetry (DSC) -- Part 4: Determination of specific heat capacity
95.99
ISO 11357-4:2014
Plastics -- Differential scanning calorimetry (DSC) -- Part 4: Determination of specific heat capacity
60.60
ISO 11357-5:1999 [Withdrawn]
Plastics -- Differential scanning calorimetry (DSC) -- Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
95.99
ISO 11357-5:2013
Plastics -- Differential scanning calorimetry (DSC) -- Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
60.60
ISO 11357-6:2002 [Withdrawn]
Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time
95.99
95.99
ISO 11357-6:2008
Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
90.92
ISO/FDIS 11357-6 [Under development]
Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
50.00
ISO 11357-7:2002 [Withdrawn]
Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics
95.99
ISO 11357-7:2015
Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics
60.60
ISO 11358:1997 [Withdrawn]
Plastics -- Thermogravimetry (TG) of polymers -- General principles
95.99
ISO 11358-1:2014
Plastics -- Thermogravimetry (TG) of polymers -- Part 1: General principles
60.60
ISO 11358-2:2005 [Withdrawn]
Plastics -- Thermogravimetry (TG) of polymers -- Part 2: Determination of activation energy
95.99
ISO 11358-2:2014
Plastics -- Thermogravimetry (TG) of polymers -- Part 2: Determination of activation energy
60.60
ISO 11358-3:2013
Plastics -- Thermogravimetry (TG) of polymers -- Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
60.60
ISO 11359-1:1999 [Withdrawn]
Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles
95.99
ISO 11359-1:2014
Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles
90.93
ISO 11359-2:1999
Plastics -- Thermomechanical analysis (TMA) -- Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
90.93
ISO 11359-3:2002
Plastics -- Thermomechanical analysis (TMA) -- Part 3: Determination of penetration temperature
90.92
ISO/CD 11359-3 [Under development]
Plastics -- Thermomechanical analysis (TMA) -- Part 3: Determination of penetration temperature
30.99
ISO 11443:1995 [Withdrawn]
Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers
95.99
ISO 11443:2005 [Withdrawn]
Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers
95.99
ISO 11443:2014
Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers
60.60
ISO 12058-1:1997
Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
90.93
ISO/DIS 12058-1 [Under development]
Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
40.99
ISO 13468-1:1996
Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 1: Single-beam instrument
90.93
ISO 13468-2:1999
Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 2: Double-beam instrument
90.93
ISO 14782:1999
Plastics -- Determination of haze for transparent materials
90.93
60.60
60.60
ISO 14853:2005 [Withdrawn]
Plastics -- Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system -- Method by measurement of biogas production
95.99
95.99
ISO 14853:2016
Plastics -- Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system -- Method by measurement of biogas production
60.60
ISO 14855:1999 [Withdrawn]
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide
95.99
ISO 14855:1999/Amd 1:2004 [Withdrawn]
Use of activated vermiculite instead of mature compost
95.99
ISO 14855-1:2005 [Withdrawn]
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 1: General method
95.99
95.99
ISO 15033:2000 [Withdrawn]
Plastics -- Determination of caprolactam and its cyclic and linear oligomers by HPLC
95.99
ISO 15033:2007
Plastics -- Determination of caprolactam and its cyclic and linear oligomers by HPLC
90.92
ISO/DIS 15033 [Under development]
Plastics -- Determination of caprolactam and its cyclic and linear oligomers by HPLC
40.60
ISO 15512:1999 [Withdrawn]
Plastics -- Determination of water content
95.99
ISO 15512:2008 [Withdrawn]
Plastics -- Determination of water content
95.99
ISO 15512:2014 [Withdrawn]
Plastics -- Determination of water content
95.99
ISO 15512:2016
Plastics -- Determination of water content
90.92
ISO/NP 15512 [Under development]
Plastics -- Determination of water content
10.99
ISO 15985:2004 [Withdrawn]
Plastics -- Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions -- Method by analysis of released biogas
95.99
95.99
ISO 16014-1:2003 [Withdrawn]
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
95.99
95.99
ISO 16014-1:2012
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
90.92
ISO/CD 16014-1 [Under development]
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
30.99
ISO 16014-2:2003 [Withdrawn]
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
95.99
ISO 16014-2:2012
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
90.92
ISO/CD 16014-2 [Under development]
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
30.99
ISO 16014-3:2003 [Withdrawn]
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
95.99
ISO 16014-3:2012
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
90.92
ISO/CD 16014-3 [Under development]
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
30.99
ISO 16014-4:2003 [Withdrawn]
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
95.99
ISO 16014-4:2012
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
90.92
ISO/CD 16014-4 [Under development]
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
30.99
ISO 16014-5:2012
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection
90.92
ISO/CD 16014-5 [Under development]
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection
30.99
ISO 16620-1:2015
Plastics -- Biobased content -- Part 1: General principles
60.60
ISO 16620-2:2015
Plastics -- Biobased content -- Part 2: Determination of biobased carbon content
90.92
ISO/NP 16620-2 [Under development]
Plastics -- Biobased content -- Part 2: Determination of biobased carbon content
10.99
ISO 16620-3:2015
Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content
60.60
ISO 16620-4:2016
Plastics -- Biobased content -- Part 4: Determination of biobased mass content
60.60
ISO 16620-5:2017
Plastics -- Biobased content -- Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
60.60
ISO 16790:2005
Plastics -- Determination of drawing characteristics of thermoplastics in the molten state
90.93
ISO 16929:2002 [Withdrawn]
Plastics -- Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
95.99
ISO 17088:2008 [Withdrawn]
Specifications for compostable plastics
95.99
ISO 17221:2014
Plastics -- Determination of image clarity (degree of sharpness of reflected or transmitted image)
60.60
ISO 17223:2014
Plastics -- Determination of yellowness index and change in yellowness index
60.60
ISO 17422:2002
Plastics -- Environmental aspects -- General guidelines for their inclusion in standards
90.93
ISO/DIS 17422 [Under development]
Plastics -- Environmental aspects -- General guidelines for their inclusion in standards
40.60
ISO 17556:2003 [Withdrawn]
Plastics -- Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
95.99
ISO 17744:2004
Plastics -- Determination of specific volume as a function of temperature and pressure (pvT diagram) -- Piston apparatus method
90.93
ISO 19929:2017
Plastics -- Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
60.60
ISO/DIS 19935-1.2 [Under development]
Plastics -- Temperature modulated DSC -- Part 1: General principles
40.60
ISO/CD 19935-2 [Under development]
Plastics -- Temperature modulated DSC -- Part 2: Measurement of accurate specific heat Cp
30.00
ISO 20200:2004 [Withdrawn]
Plastics -- Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
95.99
ISO 20965:2005
Plastics -- Determination of the transient extensional viscosity of polymer melts
90.93
ISO 22007-1:2009 [Withdrawn]
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 1: General principles
95.99
ISO 22007-1:2017
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 1: General principles
60.60
ISO 22007-2:2008 [Withdrawn]
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 2: Transient plane heat source (hot disc) method
95.99
ISO 22007-2:2015
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 2: Transient plane heat source (hot disc) method
60.60
ISO 22007-3:2008
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 3: Temperature wave analysis method
90.93
ISO 22007-4:2008 [Withdrawn]
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 4: Laser flash method
95.99
ISO 22007-4:2017
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 4: Laser flash method
60.60
ISO/TR 22007-5:2011
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
60.60
ISO 22007-6:2014
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
60.60
ISO/CD 22526-1 [Under development]
Plastics -- Carbon and environmental footprint of biobased Plastics -- Part 1: General principles
30.60
ISO/CD 22526-2 [Under development]
Plastics -- Carbon and environmental footprint of biobased Plastics -- Part 2: Material carbon footprint, Amount (mass) of CO2 removed from the air and incorporated into polymer molecule
30.60
ISO/CD 22526-3 [Under development]
Plastics -- Carbon and environmental footprint of biobased Plastics -- Part 3: Process carbon footprint, requirements and guidelines for quantification
30.60
ISO 24538:2008
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
90.93
ISO 25337:2010
Plastics -- Production quality control -- Statistical method for using single measurements
90.93
ISO/CD 26723 [Under development]
Plastics -- Determination of total luminous transmittance and reflectance
30.20

No matching records found