Standards catalogue

ISO/TC 61/SC 2

Mechanical behavior

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 61/SC 2 Secretariat Stage ICS
ISO 75:1987 [Withdrawn]
Plastics and ebonite -- Determination of temperature of deflection under load
95.99
ISO 75-1:1993 [Withdrawn]
Plastics -- Determination of temperature of deflection under load -- Part 1: General test method
95.99
ISO 75-1:2004 [Withdrawn]
Plastics -- Determination of temperature of deflection under load -- Part 1: General test method
95.99
ISO 75-1:2013
Plastics -- Determination of temperature of deflection under load -- Part 1: General test method
60.60
ISO 75-2:1993 [Withdrawn]
Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
95.99
ISO 75-2:2004 [Withdrawn]
Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
95.99
ISO 75-2:2013
Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
60.60
ISO 75-3:1993 [Withdrawn]
Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
95.99
ISO 75-3:2004
Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
90.60
ISO 178:1993 [Withdrawn]
Plastics -- Determination of flexural properties
95.99
ISO 178:2001 [Withdrawn]
Plastics -- Determination of flexural properties
95.99
ISO 178:2001/Amd 1:2004 [Withdrawn]
Precision statement
95.99
ISO 178:2010
Plastics -- Determination of flexural properties
90.92
60.60
ISO/DIS 178 [Under development]
Plastics -- Determination of flexural properties
40.60
ISO 179:1982 [Withdrawn]
Plastics -- Determination of Charpy impact strength of rigid materials
95.99
ISO 179:1993 [Withdrawn]
Plastics -- Determination of Charpy impact strength
95.99
95.99
ISO 179-1:2000 [Withdrawn]
Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
95.99
95.99
ISO 179-1:2010
Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
90.93
ISO 179-2:1997
Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test
90.60
ISO 179-2:1997/Amd 1:2011
Precision data
60.60
60.60
ISO 180:1982 [Withdrawn]
Plastics -- Determination of Izod impact strength of rigid materials
95.99
ISO 180:1993 [Withdrawn]
Plastics -- Determination of Izod impact strength
95.99
95.99
ISO 180:2000
Plastics -- Determination of Izod impact strength
90.92
60.60
ISO 180:2000/Amd 2:2013
Precision data
60.60
ISO/DIS 180 [Under development]
Plastics -- Determination of Izod impact strength
40.99
ISO 306:1987 [Withdrawn]
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature
95.99
ISO 306:1994 [Withdrawn]
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
95.99
ISO 306:2004 [Withdrawn]
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
95.99
ISO 306:2013
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
60.60
ISO/R 458:1965 [Withdrawn]
Plastics -- Determination of stiffness in torsion as a function of temperature
95.99
ISO 458-1:1985
Plastics -- Determination of stiffness in torsion of flexible materials -- Part 1: General method
90.93
ISO 458-2:1985
Plastics -- Determination of stiffness in torsion of flexible materials -- Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
90.93
ISO/R 527:1966 [Withdrawn]
Plastics -- Determination of tensile properties
95.99
ISO 527-1:1993 [Withdrawn]
Plastics -- Determination of tensile properties -- Part 1: General principles
95.99
ISO 527-1:1993/Amd 1:2005 [Withdrawn]
Details of extensometer
95.99
95.99
ISO 527-1:2012
Plastics -- Determination of tensile properties -- Part 1: General principles
90.60
ISO 527-2:1993 [Withdrawn]
Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics
95.99
95.99
ISO 527-2:2012
Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics
90.60
60.60
ISO 537:1989 [Withdrawn]
Plastics -- Testing with the torsion pendulum
95.99
ISO 604:1993 [Withdrawn]
Plastics -- Determination of compressive properties
95.99
ISO 604:2002
Plastics -- Determination of compressive properties
90.60
ISO 868:1985 [Withdrawn]
Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
95.99
ISO 868:2003
Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
90.93
ISO 899:1981 [Withdrawn]
Plastics -- Determination of tensile creep
95.99
ISO 899-1:1993 [Withdrawn]
Plastics -- Determination of creep behaviour -- Part 1: Tensile creep
95.99
ISO 899-1:2003 [Withdrawn]
Plastics -- Determination of creep behaviour -- Part 1: Tensile creep
95.99
95.99
ISO 899-1:2017
Plastics -- Determination of creep behaviour -- Part 1: Tensile creep
60.60
ISO 899-2:1993 [Withdrawn]
Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading
95.99
ISO 899-2:2003
Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading
90.93
60.60
ISO 974:1980 [Withdrawn]
Plastics -- Determination of the brittleness temperature by impact
95.99
ISO 974:2000
Plastics -- Determination of the brittleness temperature by impact
90.93
ISO 2039:1973 [Withdrawn]
Plastics and ebonite -- Determination of hardness by the ball indentation method
95.99
ISO 2039-1:1987 [Withdrawn]
Plastics -- Determination of hardness -- Part 1: Ball indentation method
95.99
ISO 2039-1:1993 [Withdrawn]
Plastics -- Determination of hardness -- Part 1: Ball indentation method
95.99
ISO 2039-1:2001
Plastics -- Determination of hardness -- Part 1: Ball indentation method
90.93
ISO 2039-2:1981 [Withdrawn]
Plastics -- Determination of hardness by the ball indentation method -- Part 2: Rockwell hardness
95.99
ISO 2039-2:1987
Plastics -- Determination of hardness -- Part 2: Rockwell hardness
90.93
ISO 3167:1993 [Withdrawn]
Plastics -- Multipurpose test specimens
95.99
ISO 3167:2002 [Withdrawn]
Plastics -- Multipurpose test specimens
95.99
ISO 3167:2014
Plastics -- Multipurpose test specimens
60.60
ISO/TR 4137:1978 [Withdrawn]
Plastics -- Determination of modulus of elasticity by alternating flexure
95.99
ISO 6239:1986 [Withdrawn]
Plastics -- Determination of tensile properties by use of small specimens
95.99
ISO 6601:1987 [Withdrawn]
Plastics -- Friction and wear by sliding -- Identification of test parameters
95.99
ISO 6601:2002
Plastics -- Friction and wear by sliding -- Identification of test parameters
90.60
ISO 6602:1985 [Withdrawn]
Plastics -- Determination of flexural creep by three-point loading
95.99
ISO 6603-1:1985 [Withdrawn]
Plastics -- Determination of multiaxial impact behaviour of rigid plastics -- Part 1: Falling dart method
95.99
ISO 6603-1:2000
Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing
90.93
ISO 6603-2:1989 [Withdrawn]
Plastics -- Determination of multiaxial impact behaviour of rigid plastics -- Part 2: Instrumented puncture test
95.99
ISO 6603-2:2000
Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing
90.93
ISO 6721:1983 [Withdrawn]
Plastics -- Determination of damping properties and complex modulus by bending vibration
95.99
ISO 6721-1:1994 [Withdrawn]
Plastics -- Determination of dynamic mechanical properties -- Part 1: General principles
95.99
95.99
ISO 6721-1:2001 [Withdrawn]
Plastics -- Determination of dynamic mechanical properties -- Part 1: General principles
95.99
ISO 6721-2:1994 [Withdrawn]
Plastics -- Determination of dynamic mechanical properties -- Part 2: Torsion-pendulum method
95.99
95.99
60.60
ISO 6721-4:1994 [Withdrawn]
Plastics -- Determination of dynamic mechanical properties -- Part 4: Tensile vibration -- Non-resonance method
95.99
60.60
60.60
60.60
60.60
ISO 6721-10:1997 [Withdrawn]
Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
95.99
ISO 6721-10:1999 [Withdrawn]
Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
95.99
ISO 6721-12:2009
Plastics -- Determination of dynamic mechanical properties -- Part 12: Compressive vibration -- Non-resonance method
90.93
ISO 8256:1990 [Withdrawn]
Plastics -- Determination of tensile-impact strength
95.99
95.99
ISO 8256:2004
Plastics -- Determination of tensile-impact strength
90.60
ISO 9352:1989 [Withdrawn]
Plastics -- Determination of resistance to wear by abrasive wheels
95.99
ISO 9352:1995 [Withdrawn]
Plastics -- Determination of resistance to wear by abrasive wheels
95.99
ISO 9352:2012
Plastics -- Determination of resistance to wear by abrasive wheels
90.60
ISO 10350:1993 [Withdrawn]
Plastics -- Acquisition and presentation of comparable single-point data
95.99
ISO 10350-1:1998 [Withdrawn]
Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials
95.99
ISO 10350-1:2007 [Withdrawn]
Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials
95.99
95.99
ISO 10350-1:2017
Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials
60.60
ISO 10350-2:2001 [Withdrawn]
Plastics -- Acquisition and presentation of comparable single-point data -- Part 2: Long-fibre-reinforced plastics
95.99
ISO 10350-2:2011
Plastics -- Acquisition and presentation of comparable single-point data -- Part 2: Long-fibre-reinforced plastics
90.92
ISO/CD 10350-2 [Under development]
Plastics -- Acquisition and presentation of comparable single-point data -- Part 2: Long-fibre-reinforced plastics
30.99
ISO 11403-1:1994 [Withdrawn]
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties
95.99
ISO 11403-1:2001 [Withdrawn]
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties
95.99
ISO 11403-1:2014
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties
60.60
ISO 11403-2:1995 [Withdrawn]
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 2: Thermal and processing properties
95.99
ISO 11403-2:2004 [Withdrawn]
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 2: Thermal and processing properties
95.99
ISO 11403-2:2012
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 2: Thermal and processing properties
90.60
ISO 11403-3:1999 [Withdrawn]
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties
95.99
ISO 11403-3:2014
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties
60.60
ISO 13586:2000
Plastics -- Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach
90.92
ISO 13586:2000/Amd 1:2003
Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres
60.60
ISO/DIS 13586 [Under development]
Plastics -- Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach
40.60
ISO 13802:1999 [Withdrawn]
Plastics -- Verification of pendulum impact-testing machines -- Charpy, Izod and tensile impact-testing
95.99
95.99
ISO 13802:2015
Plastics -- Verification of pendulum impact-testing machines -- Charpy, Izod and tensile impact-testing
60.60
ISO 15850:2002 [Withdrawn]
Plastics -- Determination of tension-tension fatigue crack propagation -- Linear elastic fracture mechanics (LEFM) approach
95.99
ISO 15850:2014
Plastics -- Determination of tension-tension fatigue crack propagation -- Linear elastic fracture mechanics (LEFM) approach
60.60
ISO 16012:2004 [Withdrawn]
Plastics -- Determination of linear dimensions of test specimens
95.99
95.99
ISO 16012:2015
Plastics -- Determination of linear dimensions of test specimens
60.60
ISO 17281:2002
Plastics -- Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
90.92
ISO/DIS 17281 [Under development]
Plastics -- Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
40.60
ISO 17282:2004
Plastics -- Guide to the acquisition and presentation of design data
90.93
ISO 17282:2004/DAmd 1 [Under development]
40.99
ISO/CD 17282 [Deleted]
Plastics -- Guide to the acquisition and presentation of design data
30.98
ISO 17541:2014
Plastics -- Quantitative evaluation of scratch-induced damage and scratch visibility
60.60
ISO/DIS 18485 [Under development]
Peel test for the determination of interlaminar fracture toughness of flexible packaging laminates
40.60
ISO 18872:2007
Plastics -- Determination of tensile properties at high strain rates
90.93
ISO 19252:2008
Plastics -- Determination of scratch properties
90.93
ISO/DTR 19278 [Under development]
Instrumented micro indentation test for hardness measurement of plastics materials
30.60
ISO/CD 20329 [Under development]
Plastics - Determination of abrasive wear resistance by sliding friction
30.60
ISO 20753:2008
Plastics -- Test specimens
90.92
ISO/DIS 20753 [Under development]
Plastics -- Test specimens
40.60
ISO 21509:2006
Plastics and ebonite -- Verification of Shore durometers
90.93
ISO 25217:2009
Adhesives -- Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens
90.93
ISO 29221:2014
Plastics -- Determination of mode I plane-strain crack-arrest toughness
60.60

No matching records found