Standards catalogue

ISO/TC 60/SC 2

Gear capacity calculation

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 60/SC 2 Secretariat Stage ICS
ISO 6336-1:1996 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors
95.99
95.99
95.99
ISO 6336-1:2006
Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors
90.92
60.60
ISO/NP 6336-1 [Under development]
Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors
10.99
ISO 6336-2:1996 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting)
95.99
95.99
95.99
ISO 6336-2:2006
Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting)
90.92
60.60
ISO/NP 6336-2 [Under development]
Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting)
10.99
ISO 6336-3:1996 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength
95.99
95.99
ISO 6336-3:2006
Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength
90.92
60.60
ISO/NP 6336-3 [Under development]
Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength
10.99
ISO 6336-5:1996 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials
95.99
ISO 6336-5:2003 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials
95.99
ISO 6336-5:2016
Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials
60.60
ISO 6336-6:2006
Calculation of load capacity of spur and helical gears -- Part 6: Calculation of service life under variable load
90.92
60.60
ISO/NP 6336-6 [Under development]
Calculation of load capacity of spur and helical gears -- Part 6: Calculation of service life under variable load
10.99
ISO 9083:2001
Calculation of load capacity of spur and helical gears -- Application to marine gears
90.93
ISO 9084:2000 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Application to high speed gears and gears of similar requirements
95.99
ISO 9085:2002
Calculation of load capacity of spur and helical gears -- Application for industrial gears
90.20
ISO 10300-1:2001 [Withdrawn]
Calculation of load capacity of bevel gears -- Part 1: Introduction and general influence factors
95.99
ISO 10300-1:2014
Calculation of load capacity of bevel gears -- Part 1: Introduction and general influence factors
60.60
ISO 10300-2:2001 [Withdrawn]
Calculation of load capacity of bevel gears -- Part 2: Calculation of surface durability (pitting)
95.99
ISO 10300-2:2014
Calculation of load capacity of bevel gears -- Part 2: Calculation of surface durability (pitting)
60.60
ISO 10300-3:2001 [Withdrawn]
Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root strength
95.99
ISO 10300-3:2014
Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root strength
60.60
ISO/TR 10495:1997 [Withdrawn]
Cylindrical gears -- Calculation of service life under variable loads -- Conditions for cylindrical gears according to ISO 6336
95.99
ISO 13691:2001
Petroleum and natural gas industries -- High-speed special-purpose gear units
90.93
ISO/DTS 13989-1 [Under development]
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 1: Flash temperature method
30.60
ISO/TR 13989-1:2000 [Withdrawn]
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 1: Flash temperature method
95.99
ISO/DTS 13989-2 [Under development]
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 2: Integral temperature method
30.60
ISO/TR 13989-2:2000 [Withdrawn]
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 2: Integral temperature method
95.99
ISO 14104 [Under development]
Gears -- Surface temper etch inspection after grinding, chemical method
60.00
ISO 14104:1995 [Withdrawn]
Gears -- Surface temper etch inspection after grinding
95.99
ISO 14104:2014
Gears -- Surface temper etch inspection after grinding, chemical method
90.92
ISO/TR 14179-1:2001
Gears -- Thermal capacity -- Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature
90.93
ISO/TR 14179-2:2001
Gears -- Thermal capacity -- Part 2: Thermal load-carrying capacity
90.93
ISO 14635-1:2000
Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
90.93
ISO 14635-2:2004
Gears -- FZG test procedures -- Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
90.93
ISO 14635-3:2005
Gears -- FZG test procedures -- Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
90.20
ISO/TR 15144-1:2010 [Withdrawn]
Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles
95.99
ISO/TR 15144-1:2014
Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles
60.60
ISO/TR 15144-2:2014
Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 2: Examples of calculation for micropitting
60.60
ISO/TR 18792:2008
Lubrication of industrial gear drives
90.93
ISO/DTR 19041 [Under development]
ISO rating system for bevel and hypoid gears -- Sample calculations
30.60
ISO/NP TS 19042 [Under development]
Tooth Flank Fracture (subsurface initiated fatigue)
10.99
ISO/TR 22849:2011
Design recommendations for bevel gears
60.60
ISO/DTR 23425 [Under development]
Calculation examples for the application of ISO 6336 -- Calculation of load capacity of spur and helical gears
30.99
ISO 23509:2006 [Withdrawn]
Bevel and hypoid gear geometry
95.99
ISO 23509:2016
Bevel and hypoid gear geometry
60.60

No matching records found