Standards catalogue

ISO/TC 20/SC 10

Aerospace fluid systems and components

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 20/SC 10 Secretariat Stage ICS
ISO 11:1980 [Withdrawn]
Aircraft -- Pressure cabin ground test connections
95.99
ISO 11:1987
Aircraft -- Ground pressure testing connections for pressure cabins
90.20
ISO 12:1976 [Withdrawn]
Aerospace -- Pipelines -- Identification scheme
95.99
ISO 12:1987
Aerospace -- Pipelines -- Identification
90.93
ISO 45:1980 [Withdrawn]
Aircraft -- Pressure refuelling connections
95.99
ISO 102:1976 [Withdrawn]
Aircraft -- Gravity filling orifices
95.99
ISO 451:1976
Aircraft -- Pressure re-oiling connection
90.93
ISO 485:1973
Aircraft water-methanol pressure connections
90.93
ISO 1022:1988 [Withdrawn]
Aerospace -- Gaseous oxygen replenishment connection for use in fluid systems (old type) -- Dimensions (Inch series) (Not valid for new designs)
95.99
ISO/R 1022:1969 [Withdrawn]
Gaseous oxygen replenishment couplings for aircraft
95.99
ISO 1023:1974
Aircraft -- High pressure air charging valves
90.20
ISO 1465:1976 [Withdrawn]
Aircraft -- Liquid oxygen replenishment couplings -- Mating dimensions
95.99
ISO 1465:1989
Aircraft -- Liquid oxygen replenishment couplings -- Mating dimensions
90.93
ISO 1749:1973 [Withdrawn]
Aircraft -- Elastomeric sealing rings -- Packaging and identification
95.99
ISO 2046:1973
Gaseous breathing oxygen supplies for aircraft
90.93
ISO 2434:1973
Compressed non-breathing air for use in aircraft
90.93
ISO 2435:1973
Nitrogen for use in aircraft
90.93
ISO 2563:1974 [Withdrawn]
Aircraft ducting and piping -- Profile dimensions for flanges of V-band couplings
95.99
ISO 2563:2009
Aircraft ducting and piping -- Profile dimensions for flanges of V-band couplings
90.93
ISO 2964:1985
Aerospace -- Tubing -- Outside diameters and thicknesses -- Metric dimensions
90.20
ISO 3174:1981 [Withdrawn]
Aircraft -- Connections for checking hydraulic systems by ground appliances
95.99
ISO 3174:1994
Aircraft -- Connections for checking hydraulic systems by ground appliances -- Threaded type
90.93
ISO 3323:1976 [Withdrawn]
Aircraft -- Hydraulic components -- Marking to indicate fluid for which component is approved
95.99
ISO 3323:1987
Aircraft -- Hydraulic components -- Marking to indicate fluid for which component is approved
90.20
ISO 5859:1991 [Withdrawn]
Aerospace -- Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
95.99
ISO 5859:2014
Aerospace series -- Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
60.60
ISO 5884:1987 [Withdrawn]
Aerospace -- Fluid systems and components -- Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
95.99
ISO 5884:2018
Aerospace series -- Fluid systems and components -- Methods for system sampling and measuring the solid particle contamination in hydraulic fluids
60.60
ISO 5887:1981
Aircraft -- Joints for connecting crew members' regulator masks to oxygen sources
90.20
ISO 6771:1981 [Withdrawn]
Aerospace construction -- Fluid systems and components -- Pressure and temperature classifications
95.99
ISO 6771:1987 [Withdrawn]
Aerospace -- Fluid systems and components -- Pressure and temperature classifications
95.99
ISO 6771:2007
Aerospace -- Fluid systems and components -- Pressure and temperature classifications
90.60
ISO 6772:1981 [Withdrawn]
Aerospace fluid systems -- Impulse testing of hydraulic hose, tubing and fittings assemblies
95.99
ISO 6772:1988 [Withdrawn]
Aerospace -- Fluid systems -- Impulse testing of hydraulic hose, tubing and fitting assemblies
95.99
ISO 6772:2012
Aerospace -- Fluid systems -- Impulse testing of hydraulic hose, tubing and fitting assemblies
90.93
ISO 6773:1982 [Withdrawn]
Aerospace fluid systems -- Thermal shock testing of piping and fittings
95.99
ISO 6773:1994
Aerospace -- Fluid systems -- Thermal shock testing of piping and fittings
90.93
ISO 7169:1984 [Withdrawn]
Aerospace construction -- Separable tube fittings for fluid systems -- General specification
95.99
ISO 7169:1993 [Withdrawn]
Aerospace fluid systems -- Separable tube fittings for 24 degrees cone -- General specification
95.99
ISO 7169:1998 [Withdrawn]
Aerospace -- Separable tube fittings for fluid systems, 24 degrees cone -- General specification
95.99
ISO 7169:2007 [Withdrawn]
Aerospace -- Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa -- Procurement specification, inch/metric
95.99
ISO 7169:2014
Aerospace -- Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa -- Procurement specification, inch/metric
60.60
ISO 7257:1983 [Withdrawn]
Aircraft -- Hydraulic tubing joints and fittings -- Rotary flexure test
95.99
ISO 7257:2016
Aircraft -- Hydraulic tubing joints and fittings -- Rotary flexure test
60.60
ISO 7258:1984
Polytetrafluoroethylene (PTFE) tubing for aerospace applications -- Methods for the determination of the density and relative density
90.93
ISO 7313:1984
Aircraft -- High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
90.92
ISO/DIS 7313 [Under development]
Aircraft -- High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
40.60
ISO 7314:1989 [Withdrawn]
Aerospace -- Fluid systems -- Hose assembly, metal
95.99
ISO 7314:1994 [Withdrawn]
Aerospace -- Fluid systems -- Hose assembly, metal
95.99
ISO 7314:2002
Aerospace -- Fluid systems -- Metal hose assemblies
90.20
ISO 7315:1985 [Withdrawn]
Aerospace -- "P" clamps (loop clamps) for fluid tubing installations -- Dimensions
95.99
ISO 7315:1988
Aerospace -- "P" clamps (loop clamps) for fluid systems -- Envelope dimensions
90.93
ISO 7319:1982 [Withdrawn]
Aerospace construction -- Fluid systems -- Interface of metric couplings
95.99
ISO 7319:1992
Aerospace -- Fluid systems -- Interface of 24 degree cone metric couplings
90.20
ISO 7320:1985 [Withdrawn]
Aerospace -- Fluid systems port connection, seal and fitting end -- Dimensions
95.99
ISO 7320:1992
Aerospace -- Couplings, threaded and sealed, for fluid systems -- Dimensions
90.20
ISO 7661:1984
Aerospace -- Fluid systems -- Clamp blocks for tube lines having axial alignment -- Design standard and qualification testing -- Metric series
90.93
ISO 8153-1:2009
Aerospace fluid systems and components -- Vocabulary -- Part 1: Hose assemblies
90.93
ISO/DIS 8153-2 [Under development]
Aerospace fluid systems and components -- Vocabulary -- Part 2: Fittings and couplings
40.60
ISO 8177:1985 [Withdrawn]
Aerospace -- Omega clamps (saddle clamps) for fluid tubing installations -- Dimensions
95.99
ISO 8177:1986 [Withdrawn]
Aerospace -- Omega clamps (saddle clamps) for fluid systems -- Dimensions
95.99
ISO 8177:2015
Aerospace -- Omega clamps (saddle clamps) for fluid systems -- Dimensions
60.60
ISO 8278:1986 [Withdrawn]
Aerospace -- Hydraulic, pressure compensated, variable delivery pumps -- General requirements
95.99
ISO 8278:2016
Aerospace series -- Hydraulic, pressure compensated, variable delivery pumps -- General requirements
60.60
ISO 8479:1986
Aerospace -- "Q" clamps (centre-mounted clamps) for fluid systems -- Dimensions
90.93
ISO 8574:1990 [Withdrawn]
Aerospace -- Hydraulic system tubing -- Qualification tests
95.99
ISO 8574:2004
Aerospace -- Hydraulic system tubing -- Qualification tests for bent tubes
90.92
ISO/NP 8574 [Under development]
Aerospace -- Hydraulic system tubing -- Qualification tests for bent tubes
10.99
ISO 8575:1990 [Withdrawn]
Aerospace -- Fluid systems -- Hydraulic system tubing
95.99
ISO 8575:2016
Aerospace -- Fluid systems -- Hydraulic system tubing
60.60
ISO 8625-1:1993 [Withdrawn]
Aerospace -- Fluid systems -- Vocabulary -- Part 1: General terms and definitions related to pressure
95.99
ISO 8625-1:2018
Aerospace -- Fluid systems -- Vocabulary -- Part 1: General terms and definitions related to pressure
60.60
ISO 8625-2:1991 [Withdrawn]
Aerospace -- Fluid systems -- Vocabulary -- Part 2: General terms and definitions relating to flow
95.99
ISO 8625-2:2018
Aerospace -- Fluid systems -- Vocabulary -- Part 2: General terms and definitions relating to flow
60.60
ISO 8625-3:1991 [Withdrawn]
Aerospace -- Fluid systems -- Vocabulary -- Part 3: General terms and definitions relating to temperature
95.99
ISO 8625-3:2018
Aerospace -- Fluid systems -- Vocabulary -- Part 3: General terms and definitions relating to temperature
60.60
ISO 8625-4:2011
Aerospace -- Fluid systems -- Vocabulary -- Part 4: General terms and definitions relating to control/actuation systems
90.93
ISO 8775:1988
Aerospace -- Gaseous oxygen replenishment connection for use in fluid systems (new type) -- Dimensions (Inch series)
90.93
ISO 8829:1990 [Withdrawn]
Aerospace -- Polytetrafluoroethylene (PTFE) hose assemblies -- Test methods
95.99
ISO 8829-1:2009
Aerospace -- Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies -- Part 1: Metallic (stainless steel) braid
90.93
ISO 8829-2:2006
Aerospace -- Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies -- Part 2: Non-metallic braid
90.93
ISO 8913:1989 [Withdrawn]
Aerospace -- Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa -- Procurement specification
95.99
95.99
ISO 8913:1994 [Withdrawn]
Aerospace -- Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa -- Procurement specification
95.99
ISO 8913:2006
Aerospace -- Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) -- Procurement specification
90.93
ISO 9206:1990 [Withdrawn]
Aerospace -- Constant displacement hydraulic motors -- General specifications
95.99
ISO 9206:2016 [Withdrawn]
Aerospace series -- Constant displacement hydraulic motors -- General specifications
95.99
ISO 9206:2018
Aerospace -- Fixed displacement hydraulic motors -- General specifications
60.60
ISO 9528:1989 [Withdrawn]
Aerospace -- Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa -- Procurement specification
95.99
95.99
ISO 9528:1994
Aerospace -- Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa -- Procurement specification
90.92
ISO/CD 9528 [Under development]
Aerospace -- Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa -- Procurement specification
30.99
ISO/DIS 9528 [Deleted]
Aerospace -- Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa -- Procurement specification
40.98
ISO 9538:1996 [Withdrawn]
Aerospace -- Hydraulic tubing joints and fittings -- Planar flexure test
95.99
ISO 9538:2017
Aerospace series -- Hydraulic tubing joints and fittings -- Planar flexure test
60.60
ISO 9634:1994
Aerospace -- Fluid systems -- Dimensions of plastic protective caps and plugs
90.93
ISO 9679:2006
Aerospace -- Clamps for fluid systems -- Test methods
90.93
ISO 9938:1990 [Withdrawn]
Aerospace -- Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa -- Procurement specification
95.99
ISO 9938:1994
Aerospace -- Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa -- Procurement specification
90.92
ISO/CD 9938 [Under development]
Aerospace -- Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa -- Procurement specification
30.99
ISO/DIS 9938 [Deleted]
Aerospace -- Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa -- Procurement specification
40.98
ISO 9939:1994
Aerospace -- Pressure re-oiling connection (new type)
90.93
ISO 9940:2015
Aerospace series -- Fluid, hydraulic, phosphate ester-base, fire resistant -- Technical specification
60.60
ISO 10502:1992 [Withdrawn]
Aerospace -- Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 degrees C and 10 500 kPa -- Procurement specification
95.99
ISO 10502:2012
Aerospace -- Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa -- Technical specifications and requirements
90.93
ISO 10583:1993
Aerospace fluid systems -- Test methods for tube/fitting assemblies
90.60
ISO 11217:1993 [Withdrawn]
Aerospace -- Hydraulic system fluid contamination -- Location of sampling points and criteria for sampling
95.99
ISO 11218:1993 [Withdrawn]
Aerospace -- Cleanliness classification for hydraulic fluids
95.99
ISO 11218:2017
Aerospace -- Cleanliness classification for hydraulic fluids
60.60
ISO 11639:2010
Aerospace -- Part numbering for hose assemblies
90.93
ISO 12319:2006
Aerospace -- 'P' (loop style) clamps -- Procurement specification
90.93
ISO 12333:2000 [Withdrawn]
Aerospace -- Constant displacement hydraulic motors -- General specifications for 35 000 kPa systems
95.99
ISO 12334:2000 [Withdrawn]
Aerospace -- Hydraulic, pressure-compensated, variable delivery pumps -- General requirement for 35 000 kPa systems
95.99
ISO 12573:2010
Aircraft -- Tubing tolerances -- Inch series
90.93
ISO 12584:2013
Aerospace -- Hydraulic fluid components -- Expression of particulate contamination levels
90.20
ISO 14085-1:2015
Aerospace series -- Hydraulic filter elements -- Test methods -- Part 1: Test sequence
60.60
ISO 14085-2:2015
Aerospace series -- Hydraulic filter elements -- Test methods -- Part 2: Conditioning
60.60
ISO 14085-3:2015
Aerospace series -- Hydraulic filter elements -- Test methods -- Part 3: Filtration efficiency and retention capacity
60.60
ISO 14085-4:2015
Aerospace series -- Hydraulic filter elements -- Test methods -- Part 4: Verification of collapse/burst pressure rating
60.60
ISO 14085-5:2015
Aerospace series -- Hydraulic filter elements -- Test methods -- Part 5: Resistance to flow fatigue
60.60
ISO 14085-6:2015
Aerospace series -- Hydraulic filter elements -- Test methods -- Part 6: Initial cleanliness level
60.60
ISO 16031-1:2002
Aerospace fluid systems -- O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes -- Part 1: Close tolerances for hydraulic systems
90.93
ISO 16031-2:2003
Aerospace fluid systems -- O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes -- Part 2: Standard tolerances for non-hydraulic systems
90.20
ISO 16682:2015
Aerospace series -- Terminology for clamping devices
60.60
ISO 18170:2017
Aerospace series -- AC induction electric motor driven, variable delivery, hydraulic pumps -- General requirements
60.60
ISO/DIS 18387 [Under development]
Aerospace -- Linear hydraulic utility actuator -- General specifications
40.60
ISO 18487-1:2017
Aerospace series -- Titanium tube for 35 MPa operating pressure -- Part 1: Inch series
60.60
ISO 19631:2015
Aerospace series -- Tube fittings for fluid systems, 5 080 psi (35 000 kPa) -- Qualification specification
60.60
ISO 19632:2015
Aerospace series -- Fitting end, 24° internal cone, external thread, flareless type extra fine thread pitch inch series -- Design standard
60.60
ISO/AWI 22056 [Under development]
Aerospace series - Lubrication filter elements - Test methods
20.00
ISO 22072:2005 [Withdrawn]
Aerospace -- Electrohydrostatic actuator (EHA) -- Characteristics to be defined in procurement specifications
95.99
ISO 22072:2011
Aerospace -- Electrohydrostatic actuator (EHA) -- Characteristics to be defined in procurement specifications
90.93
ISO 22089:2009
Aerospace -- Hydraulic power transfer units -- General specifications
90.93
ISO 22431:2018
Aerospace series -- Pipe coupling 8°30' -- Dynamic beam seal end for ferrule, welded -- Geometric configuration
60.60
ISO 22433:2018
Aerospace series -- Pipe coupling 8°30' -- Dynamic beam seal end for elbows, tees and crosses -- Geometric configuration
60.60
ISO 22436:2018
Aerospace series -- Pipe coupling 8°30' -- Thread end -- Geometric configuration
60.60
ISO 22437:2018
Aerospace series -- Pipe coupling 8°30' in titanium alloy -- Nut for welded ferrule
60.60
ISO 22438:2018
Aerospace series -- Pipe coupling 8°30' in titanium alloy -- Thrust wires
60.60
ISO 23748:2016
Aerospace series -- O-ring grooves -- Dimensions
60.60
ISO 23933:2006
Aerospace -- Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) -- Procurement specification
90.93
ISO 23935:2006
Aircraft -- Environmental test procedures for airborne fluid system components -- Resistance to fire in designated fire zones
90.93
ISO 27996:2009
Aerospace fluid systems -- Elastomer seals -- Storage and shelf life
90.92

No matching records found