Standards catalogue

ISO/TC 20

Aircraft and space vehicles

Subcommittee Subcommittee Title Published standards Standards under development
ISO/TC 20/SC 1 Aerospace electrical requirements 61 123
ISO/TC 20/SC 4 Aerospace fastener systems 92 1
ISO/TC 20/SC 6 Standard atmosphere 8 3
ISO/TC 20/SC 8 Aerospace terminology 22 20
ISO/TC 20/SC 9 Air cargo and ground equipment 63 11
ISO/TC 20/SC 10 Aerospace fluid systems and components 81 15
ISO/TC 20/SC 13 Space data and information transfer systems 92 11
ISO/TC 20/SC 14 Space systems and operations 156 46
ISO/TC 20/SC 16 Unmanned aircraft systems 0 4
  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 20 Secretariat Stage ICS
ISO/R 10:1955 [Withdrawn]
Withdrawal of ISO/R 10-1955
95.99
ISO 44:1975
Aerospace -- Lever-operated, two-position, ON/OFF switches -- Directions of operation
90.93
ISO/R 47:1957 [Withdrawn]
Withdrawal of ISO/R 47-1957
95.99
ISO/R 103:1959 [Withdrawn]
Withdrawal of ISO/R 103-1959
95.99
ISO/R 130:1959 [Withdrawn]
Withdrawal of ISO/R 130-1959
95.99
ISO/R 222:1968 [Withdrawn]
Withdrawal of ISO/R 222-1961
95.99
ISO 223:1975 [Withdrawn]
Withdrawal of ISO 223-1975
95.99
ISO/TR 224:1998 [Withdrawn]
Aircraft -- Declaration of design and performance for aircraft equipment -- Standard form
95.99
ISO 244:1979
Aircraft -- Sealing wire
90.60
ISO/R 267:1962 [Withdrawn]
Withdrawal of ISO/R 267-1962
95.99
ISO 268:1980
Aircraft -- Mechanical and electromechanical indicators -- General requirements
90.60
ISO 413:1974
Aircraft -- Heads of lubricating nipples
90.93
ISO/R 414:1965 [Withdrawn]
Withdrawal of ISO/R 414-1965
95.99
ISO/R 440:1969 [Withdrawn]
Withdrawal of ISO/R 440-1969
95.99
ISO/R 443:1965 [Withdrawn]
Marking of aircraft gas cylinders
95.99
ISO/R 469:1966 [Withdrawn]
Withdrawal of ISO/R 469-1966
95.99
ISO/R 470:1966 [Withdrawn]
Withdrawal of ISO/R 470-1966
95.99
ISO/R 474:1966 [Withdrawn]
Withdrawal of ISO/R 474-1966
95.99
ISO 482:1977
Aircraft -- Propulsion units and components -- Methods of numbering and describing direction of rotation
90.93
ISO/R 539:1967 [Withdrawn]
Withdrawal of ISO/R 539-1967
95.99
ISO/R 564:1967 [Withdrawn]
Withdrawal of ISO/R 564-1967
95.99
ISO/R 634:1967 [Withdrawn]
Withdrawal of ISO/R 634-1964
95.99
ISO/R 854:1968 [Withdrawn]
Withdrawal of ISO/R 854-1968
95.99
ISO 1002:1983
Rolling bearings -- Airframe bearings -- Characteristics, boundary dimensions, tolerances, static load ratings
90.93
ISO 1021:1980
Aircraft -- Engine nacelle fire extinguisher apertures and doors
90.93
ISO/R 1075:1969 [Withdrawn]
Withdrawal of ISO/R 1075-1969
95.99
ISO/R 1076:1969 [Withdrawn]
Withdrawal of ISO/R 1076-1969
95.99
ISO/R 1077:1969 [Withdrawn]
Withdrawal of ISO/R 1077-1969
95.99
ISO/R 1078:1969 [Withdrawn]
Withdrawal of ISO/R 1078-1969
95.99
ISO 1151:1972 [Withdrawn]
Withdrawal of ISO 1151-1975
95.99
ISO 1151-1:1985 [Withdrawn]
Flight dynamics -- Concepts, quantities and symbols -- Part 1: Aircraft motion relative to the air
95.99
ISO 1151-2:1974 [Withdrawn]
Terms and symbols for flight dynamics -- Part 2: Motions of the aircraft and the atmosphere relative to the Earth
95.99
ISO 1151-3:1972 [Withdrawn]
Terms and symbols for flight dynamics -- Part 3: Derivatives of forces, moments and their coefficients
95.99
ISO 1151-4:1974 [Withdrawn]
Terms and symbols for flight dynamics -- Part 4: Concepts, quantities and symbols used in the study of aircraft stability and control
95.99
95.99
ISO 1151-5:1974 [Withdrawn]
Terms and symbols for flight dynamics -- Part 5: Quantities used in measurements
95.99
ISO 1152:1974 [Withdrawn]
Withdrawal of ISO 1152-1974
95.99
ISO 1153:1972 [Withdrawn]
Withdrawal of ISO 1153-1972
95.99
ISO/R 1220:1970 [Withdrawn]
Withdrawal of ISO/R 1220-1970
95.99
ISO 1464:1979 [Withdrawn]
Aircraft -- Clearance dimensions for tripod jacks
95.99
ISO/R 1468:1970 [Withdrawn]
Withdrawal of ISO/R 1468-1970
95.99
ISO/R 1490:1970 [Withdrawn]
Withdrawal of ISO/R 1490-1970
95.99
ISO/R 1491:1970 [Withdrawn]
Withdrawal of ISO/R 1491-1970
95.99
ISO 1540:1977 [Withdrawn]
Aerospace -- Characteristics of aircraft electrical systems
95.99
ISO/R 1799:1971 [Withdrawn]
Withdrawal of ISO/R 1799-1971
95.99
ISO/R 1800:1971 [Withdrawn]
Withdrawal of ISO/R 1800-1971
95.99
ISO 1963:1973 [Withdrawn]
Withdrawal of ISO 1963-1973
95.99
ISO 1971:1975
Aircraft -- Accessory drives and mounting pads
90.60
ISO 2020:1973 [Withdrawn]
Flexible steel wire rope for aircraft controls -- Technical specification
95.99
ISO 2020:1984 [Withdrawn]
Aerospace -- Mechanical system parts -- Preformed flexible steel wire rope for aircraft controls -- Technical specification
95.99
ISO 2020-1:1997
Aerospace -- Preformed flexible steel wire rope for aircraft controls -- Part 1: Dimensions and loads
90.93
ISO 2020-2:1997
Aerospace -- Preformed flexible steel wire rope for aircraft controls -- Part 2: Technical specification
90.93
ISO 2529:1973 [Withdrawn]
Aircraft -- Zones, access doors and panels -- Referencing system
95.99
ISO 2650:1974 [Withdrawn]
Withdrawal of ISO 2650-1974
95.99
ISO 2653-1:1975 [Withdrawn]
Environmental tests for aircraft equipment -- Part 1: Ice formation
95.99
ISO 2655:1975 [Withdrawn]
Withdrawal of ISO 2655-1975
95.99
ISO 2657:1976 [Withdrawn]
Withdrawal of ISO 2657-1976
95.99
ISO 2658:1975 [Withdrawn]
Withdrawal of ISO 2658-1975
95.99
ISO 2669:1995
Environmental tests for aircraft equipment -- Steady-state acceleration
90.60
ISO 2669-1:1978 [Withdrawn]
Environmental tests for aircraft equipment -- Part 1: Steady state acceleration
95.99
ISO 2671:1982
Environmental tests for aircraft equipment -- Part 3.4 : Acoustic vibration
90.93
ISO 2676:1975 [Withdrawn]
Withdrawal of ISO 2676-1975
95.99
ISO 2678-1:1977 [Withdrawn]
Environmental tests for aircraft equipment -- Part 1: Insulation resistance and high voltage tests for electrical equipment
95.99
ISO 2684:1975 [Withdrawn]
Withdrawal of ISO 2684-1975
95.99
ISO 2685:1992 [Withdrawn]
Aircraft -- Environmental conditions and test procedures for airborne equipment -- Resistance to fire in designated fire zones
95.99
ISO 2685:1998
Aircraft -- Environmental test procedure for airborne equipment -- Resistance to fire in designated fire zones
90.93
ISO/TR 2685:1984 [Withdrawn]
Aircraft -- Environmental conditions and test procedures for airborne equipment -- Resistance to fire in designated fire zones
95.99
ISO 2764:1974 [Withdrawn]
Withdrawal of ISO 2764-1974
95.99
ISO 2765:1974 [Withdrawn]
Withdrawal of ISO 2765-1974
95.99
ISO 2964:1974 [Withdrawn]
Aircraft -- Tubing outside diameters and thicknesses -- Metric dimensions
95.99
ISO 4153:1981
Aircraft -- Pressure fuel dispensing system -- Test procedure and limit value for shut-off surge pressure
90.93
ISO 7137:1981 [Withdrawn]
Aircraft -- Environmental conditions and test procedures for airborne equipment
95.99
ISO 7137:1987 [Withdrawn]
Aircraft -- Environmental conditions and test procedures for airborne equipment
95.99
ISO 7137:1992 [Withdrawn]
Aircraft -- Environmental conditions and test procedures for airborne equipment
95.99
ISO 7137:1995
Aircraft -- Environmental conditions and test procedures for airborne equipment
90.60
ISO 7938:1986
Aircraft -- Ball bearings for control cable pulleys -- Dimensions and loads
90.93
ISO 7939:1988
Aircraft -- Non-metallic pulleys with ball bearings for control cables -- Dimensions and loads
90.93
ISO 8074:1985
Aerospace -- Surface treatment of austenitic stainless steel parts
90.60
ISO 8075:1985
Aerospace -- Surface treatment of hardenable stainless steel parts
90.60
ISO 8076:1984 [Withdrawn]
Aerospace process -- Anodic treatment of aluminium alloys -- Chromic acid process 40 V DC, undyed coating
95.99
ISO 8077:1984 [Withdrawn]
Aerospace process -- Anodic treatment of aluminium alloys -- Chromic acid process 20 V DC, undyed coating
95.99
ISO 8078:1984
Aerospace process -- Anodic treatment of aluminium alloys -- Sulfuric acid process, undyed coating
90.93
ISO 8079:1984
Aerospace process -- Anodic treatment of aluminium alloys -- Sulfuric acid process, dyed coating
90.93
ISO 8080:1985
Aerospace -- Anodic treatment of titanium and titanium alloys -- Sulfuric acid process
90.60
ISO 8081:1985
Aerospace process -- Chemical conversion coating for aluminium alloys -- General purpose
90.60
ISO 8399-1:1998
Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 1: Design criteria
90.93
ISO 8399-2:1998
Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 2: Dimensions
90.93
ISO 8591-1:1989
Aerospace -- Wrought aluminium and aluminium alloys -- Inspection, testing and supply requirements -- Part 1: General requirements
90.93
ISO 9216:2002
Aerospace -- Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses
90.93
ISO 9217:2002
Aerospace -- Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses
90.93
ISO 9218:2002
Aerospace -- Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses
90.93
ISO 9219:2002
Aerospace -- Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated -- Dimensions and masses
90.93
ISO 9736:2000
Aerospace -- Eye-ends, in steel, threaded, for aircraft control wire rope -- Dimensions and loads
90.60
ISO 9737:2000
Aerospace -- Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
90.60
ISO 9738:2000
Aerospace -- Turnbarrels, for aircraft control wire rope -- Dimensions and loads
90.60
ISO 9747:2000
Aerospace -- Double-shank ball-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope -- Dimensions and loads
90.60
ISO 9748:2000
Aerospace -- Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
90.60
ISO 9749:2000
Aerospace -- Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
90.60
ISO 9757:2000
Aerospace -- Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels -- Dimensions and loads
90.60
ISO 9758:2000
Aerospace -- Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope -- Dimensions and loads
90.60
ISO 9759:2000
Aerospace -- Fork-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope -- Dimensions and loads
90.60
ISO 9760:2000
Aerospace -- Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope for rolling bearings -- Dimensions and loads
90.60
ISO 9761:2000
Aerospace -- Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles -- Dimensions
90.60
ISO 9762:2000
Aerospace -- Aircraft control wire rope assemblies -- Dimensions and end-fitting combinations
90.60
ISO 9763:1999
Aerospace -- Aircraft control wire rope assemblies -- Technical specification
90.93
ISO/TR 10201:1989 [Withdrawn]
Aerospace -- Standards for electronic instruments and systems
95.99
ISO/TR 10201:1991 [Withdrawn]
Aerospace -- Standards for electronic instruments and systems
95.99
ISO/TR 10201:1996 [Withdrawn]
Aerospace -- Standards for electronic instruments and systems
95.99
ISO/TR 10201:2001 [Withdrawn]
Aerospace -- Standards for electronic instruments and systems
95.99
ISO 10792-1:1995
Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 1: Metric series
90.93
ISO 10792-2:1995
Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 2: Inch series
90.93
ISO 10792-3:1995
Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 3: Technical specification
90.93
ISO 10955:1999
Aerospace -- End-fittings and turnbarrels for aircraft control wire rope -- Technical specification
90.93
ISO 13411:1997
Aerospace -- Airframe needle roller, cylindrical roller and track roller bearings -- Technical specification
90.93
ISO 13412:1997
Aerospace -- Airframe needle track roller, yoke type, single-row, sealed -- Inch series
90.93
ISO 13413:1997
Aerospace -- Airframe needle track roller, yoke type, double-row, sealed -- Inch series
90.93
ISO 13414:1997
Aerospace -- Airframe needle roller bearings, single-row, shielded -- Inch series
90.93
ISO 13415:1997
Aerospace -- Airframe needle track roller, stud type, single-row, sealed -- Inch series
90.93
ISO 13416:1997
Aerospace -- Airframe needle track roller, yoke type, single-row, sealed -- Metric series
90.93
ISO 13417:1997
Aerospace -- Airframe needle track roller, stud type, single-row, sealed -- Metric series
90.93
ISO 14190:1998
Aerospace -- Airframe rolling bearings: ball and spherical roller bearings -- Technical specification
90.93
ISO 14191:1998
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 -- Metric series
90.93
ISO 14192:1998
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty -- Metric series
90.93
ISO 14193:1998
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring intermediate duty -- Inch series
90.93
ISO 14194:1998
Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty -- Inch series
90.93
ISO 14195:1998
Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty -- Inch series
90.93
ISO 14196:1998
Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty -- Inch series
90.93
ISO 14197:1998
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty -- Inch series
90.93
ISO 14201:1998
Aerospace -- Airframe ball bearings, double-row, self-aligning, diameter series 2 -- Metric series
90.93
ISO 14202:1998
Aerospace -- Airframe ball bearings, single-row, rigid, diameter series 0 and 2 -- Metric series
90.93
ISO 14203:1998
Aerospace -- Airframe ball bearings, single-row, rigid, diameter series 8 and 9 -- Metric series
90.93
ISO 14204:1998
Aerospace -- Airframe ball bearings, double-row, rigid, diameter series 0 -- Metric series
90.93
ISO 14206:1998
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, light duty -- Inch series
90.93
ISO 14207:1998
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, light duty -- Inch series
90.93
ISO 14208:1998
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, intermediate duty -- Inch series
90.93
ISO 14209:1998
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty -- Inch series
90.93
ISO 14210:1998
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty -- Inch series
90.93
ISO 14211:1998
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty -- Inch series
90.93
ISO 14212:1998
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty -- Inch series
90.93
ISO 14213:1998
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra-light duty -- Inch series
90.93
ISO 14214:1998
Aerospace -- Airframe ball bearings, double-row, rigid, sealed, heavy duty -- Inch series
90.93
ISO 14215:1998
Aerospace -- Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty -- Inch series
90.93
ISO 14216:1998
Aerospace -- Airframe ball bearings, double-row, self-aligning, sealed, heavy duty -- Inch series
90.93
ISO 14217:1998
Aerospace -- Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty -- Inch series
90.93
ISO 14218:1998
Aerospace -- Airframe ball bearings, single-row, self-aligning, sealed, heavy duty -- Inch series
90.93
ISO 14219:1998
Aerospace -- Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty -- Inch series
90.93
ISO 14220:1998
Aerospace -- Airframe ball bearings, single-row, self-aligning, sealed, light duty -- Inch series
90.93
ISO 14221:1998
Aerospace -- Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty -- Inch series
90.93
ISO 21849:2006
Aircraft and space -- Industrial data -- Product identification and traceability
90.93
ISO/TS 21849:2003 [Withdrawn]
Aircraft -- Integrated data processing materials management -- Bar coding
95.99

No matching records found