Subcommittee Subcommittee Title Published standards Standards under development
ISO/TC 6/SC 2 Test methods and quality specifications for paper and board 82 11
  • Filter:

  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 6 Secretariat Stage ICS
ISO/R 58:1958
Substances of paper
95.99
ISO/R 66:1958
Paper vocabulary — First series of terms
95.99
ISO/R 101:1959
Width of sheets of paper
95.99
ISO/R 135:1959
Paper vocabulary — Second series of terms
95.99
ISO 186:1977
Paper and board — Sampling for testing
95.99
ISO 216:1975
Writing paper and certain classes of printed matter — Trimmed sizes — A and B series
95.99
ISO 216:2007
Writing paper and certain classes of printed matter — Trimmed sizes — A and B series, and indication of machine direction
90.93
ISO 217:1974
Unprocessed writing and printing paper — Method of expression of dimensions and direction of manufacture
95.99
ISO 217:1995
Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction
95.99
ISO 217:2008
Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction
95.99
ISO 217:2013
Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction
90.60
ISO/R 231:1961
Paper vocabulary — Third series of terms
95.99
ISO 269:1976
Correspondence envelopes — Designation and sizes
95.99
ISO 269:1985
Correspondence envelopes — Designation and sizes
95.99
ISO 287:1978
Paper and board — Determination of moisture content — Oven-drying method
95.99
ISO 302:1981
Pulps — Determination of Kappa number
95.99
ISO 302:2004
Pulps — Determination of Kappa number
95.99
ISO 302:2015
Pulps — Determination of Kappa number
60.60
ISO 328:1974
Picture postcards and lettercards — Size
95.99
ISO 353:1975
Processed writing paper and certain classes of printed matter — Method of expression of dimensions
95.99
ISO/R 372:1964
Paper vocabulary — Fourth series of terms
95.99
ISO 415:1975
Envelopes, postcards and similar articles — Cancellation area
95.99
ISO 416:1974
Picture postcards — Area reserved for the address
95.99
ISO 478:1974
Paper — Untrimmed stock sizes for the ISO-A Series — ISO primary range
95.99
ISO 479:1975
Paper — Untrimmed sizes — Designation and tolerances
95.99
ISO/R 499:1966
Paper — Internal diameters of cores of reels
95.99
ISO 593:1974
Paper — Untrimmed stock sizes for the ISO-A Series — ISO supplementary range
95.99
ISO 618:1974
Paper — Articles of stationery that include detachable sheets — Overall trimmed sizes
95.99
ISO 623:1974
Paper and board — Folders and files — Sizes
95.99
ISO 624:1974
Pulps — Determination of dichloromethane soluble matter
95.99
ISO 638:1978
Pulps — Determination of dry matter content
95.99
ISO 638:2008
Paper, board and pulps — Determination of dry matter content — Oven-drying method
90.92
ISO/CD 638-1
Paper, board and pulps — Dry Matter content — Part 1: Materials in solid form
30.99
ISO/CD 638-2
Paper, board and pulps — Dry Matter content — Part 2: Liquid suspensions and gels
30.60
ISO/WD 638
Paper, board and pulps — Determination of dry matter content — Oven-drying method
20.98
ISO 692:1982
Pulps — Determination of alkali solubility
90.93
ISO 699:1982
Pulps — Determination of alkali resistance
95.99
ISO 699:2015
Pulps — Determination of alkali resistance
60.60
ISO 776:1982
Pulps — Determination of acid-insoluble ash
95.99
ISO 776:2011
Pulps — Determination of acid-insoluble ash
90.93
ISO 777:1982
Pulps — Determination of calcium content — EDTA titrimetric and flame atomic absorption spectrometric methods
95.99
ISO 777:2001
Paper, board and pulp — Determination of calcium
95.99
ISO 777:2005
Paper, board and pulp — Determination of acid-soluble calcium
95.99
ISO 778:1982
Pulps — Determination of copper content — Extraction-photometric and flame atomic absorption spectrometric methods
95.99
ISO 778:2001
Paper, board and pulp — Determination of copper
95.99
ISO 778:2005
Paper, board and pulp — Determination of acid-soluble copper
95.99
ISO 779:1982
Pulps — Determination of iron content — 1,10-Phenanthroline photometric and flame atomic absorption spectrometric methods
95.99
ISO 779:2001
Paper, board and pulp — Determination of iron
95.99
ISO 779:2005
Paper, board and pulp — Determination of acid-soluble iron
95.99
ISO 801-1:1979
Pulps — Determination of saleable mass in lots — Part 1: Pulp baled in sheet form
95.99
ISO 801-1:1994
Pulps — Determination of saleable mass in lots — Part 1: Pulp baled in sheet form
90.93
ISO 801-2:1979
Pulps — Determination of saleable mass in lots — Part 2: Pulps (such as flash-dried pulp) baled in slabs
95.99
ISO 801-2:1994
Pulps — Determination of saleable mass in lots — Part 2: Pulps (such as flash-dried pulps) baled in slabs
90.93
ISO 801-3:1994
Pulps — Determination of saleable mass in lots — Part 3: Unitized bales
90.93
ISO 838:1974
Paper — Holes for general filing purposes — Specifications
90.93
ISO/R 1295:1970
Paper vocabulary — Fifth series of terms
95.99
ISO 1762:1974
Pulps — Determination of ash
95.99
ISO 1762:2001
Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C
95.99
ISO 1762:2015
Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C
95.99
ISO 1762:2019
Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 525 °C
60.60
ISO 1830:1982
Pulps — Determination of manganese content — Sodium periodate photometric and flame atomic absorption spectrometric methods
95.99
ISO 1830:2005
Paper, board and pulps — Determination of acid-soluble manganese
95.99
ISO/R 1912:1971
Paper vocabulary — Sixth series of terms (Definition of optical properties
95.99
ISO 1924:1976
Paper and board — Determination of tensile strength
95.99
ISO 2144:1997
Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C
95.99
ISO 2144:2015
Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C
95.99
ISO 2144:2019
Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 900 °C
60.60
ISO 2469:1977
Paper, board and pulps — Measurement of diffuse reflectance factor
95.99
ISO 2469:1994
Paper, board and pulps — Measurement of diffuse reflectance factor
95.99
ISO 2469:1994/Cor 1:1998
Paper, board and pulps — Measurement of diffuse reflectance factor — Technical Corrigendum 1
95.99
ISO 2469:2007
Paper, board and pulps — Measurement of diffuse radiance factor
95.99
ISO 2469:2014
Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)
90.20
ISO 2470-1:2009
Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)
95.99
ISO 2470-1:2016
Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)
60.60
ISO 2470-2:2008
Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness)
90.93
ISO 2470:1973
Paper and board — Measurement of diffuse blue reflectance factor (ISO brightness)
95.99
ISO 2470:1977
Paper and board — Measurement of diffuse blue reflectance factor (ISO brightness)
95.99
ISO 2470:1999
Paper, board and pulps — Measurement of diffuse blue reflectance factor (ISO brightness)
95.99
ISO 2471:1977
Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method
95.99
ISO 2471:1998
Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method
95.99
ISO 2471:2008
Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method
90.93
ISO 3260:1982
Pulps — Determination of chlorine consumption (Degree of delignification)
95.99
ISO 3260:2015
Pulps — Determination of chlorine consumption (Degree of delignification)
60.60
ISO 3688:1977
Pulps — Measurement of diffuse blue reflectance factor (ISO brightness)
95.99
ISO 3688:1977/Amd 1:1980
Pulps — Measurement of diffuse blue reflectance factor (ISO brightness) — Amendment 1
95.99
ISO 3688:1999
Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
90.93
ISO 4046-1:2002
Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index
95.99
ISO 4046-1:2016
Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index
60.60
ISO 4046-2:2002
Paper, board, pulps and related terms — Vocabulary — Part 2: Pulping terminology
95.99
ISO 4046-2:2016
Paper, board, pulps and related terms — Vocabulary — Part 2: Pulping terminology
60.60
ISO 4046-3:2002
Paper, board, pulps and related terms — Vocabulary — Part 3: Paper-making terminology
95.99
ISO 4046-3:2016
Paper, board, pulps and related terms — Vocabulary — Part 3: Paper-making terminology
60.60
ISO 4046-4:2002
Paper, board, pulps and related terms — Vocabulary — Part 4: Paper and board grades and converted products
95.99
ISO 4046-4:2016
Paper, board, pulps and related terms — Vocabulary — Part 4: Paper and board grades and converted products
60.60
ISO 4046-5:2002
Paper, board, pulps and related terms — Vocabulary — Part 5: Properties of pulp, paper and board
95.99
ISO 4046-5:2016
Paper, board, pulps and related terms — Vocabulary — Part 5: Properties of pulp, paper and board
60.60
ISO 4046:1978
Paper, board, pulp and related terms — Vocabulary
95.99
ISO 4094:1991
Paper, board and pulps — International calibration of testing apparatus — Nomination and acceptance of standardizing and authorized laboratories
95.99
ISO 4094:2005
Paper, board and pulps — International calibration of testing apparatus — Nomination and acceptance of standardizing and authorized laboratories
95.99
ISO 4094:2017
Paper, board and pulps — General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3
60.60
ISO 4119:1978
Pulps — Determination of stock concentration (Rapid method)
95.99
ISO 4119:1995
Pulps — Determination of stock concentration
90.93
ISO 5263-1:2004
Pulps — Laboratory wet disintegration — Part 1: Disintegration of chemical pulps
90.93
ISO 5263-2:2004
Pulps — Laboratory wet disintegration — Part 2: Disintegration of mechanical pulps at 20 degrees C
90.93
ISO 5263-3:2004
Pulps — Laboratory wet disintegration — Part 3: Disintegration of mechanical pulps at > 85 degrees C
90.60
ISO 5263:1979
Pulps — Laboratory wet disintegration
95.99
ISO 5263:1995
Pulps — Laboratory wet disintegration
95.99
ISO 5264-1:1979
Pulps — Laboratory beating — Part 1: Valley beater method
90.93
ISO 5264-2:1979
Pulps — Laboratory beating — Part 2: PFI mill method
95.99
ISO 5264-2:2002
Pulps — Laboratory beating — Part 2: PFI mill method
95.99
ISO 5264-2:2011
Pulps — Laboratory beating — Part 2: PFI mill method
90.93
ISO 5264-3:1979
Pulps — Laboratory beating — Part 3: Jokro mill method
95.99
ISO 5267-1:1979
Pulps — Determination of drainability — Part 1: Schopper-Riegler method
95.99
ISO 5267-1:1999
Pulps — Determination of drainability — Part 1: Schopper-Riegler method
90.93
ISO 5267-1:1999/Cor 1:2001
Pulps — Determination of drainability — Part 1: Schopper-Riegler method — Technical Corrigendum 1
60.60
ISO 5267-2:1980
Pulps — Determination of drainability — Part 2: "Canadian Standard" freeness method
95.99
ISO 5267-2:2001
Pulps — Determination of drainability — Part 2: "Canadian Standard" freeness method
90.93
ISO 5269-1:1979
Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method
95.99
ISO 5269-1:1998
Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method
95.99
ISO 5269-1:2005
Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method
90.60
ISO 5269-2:1980
Pulps — Preparation of laboratory sheets for physical testing — Part 2: Rapid-Koethen method
95.99
ISO 5269-2:1998
Pulps — Preparation of laboratory sheets for physical testing — Part 2: Rapid-Köthen method
95.99
ISO 5269-2:2004
Pulps — Preparation of laboratory sheets for physical testing — Part 2: Rapid-Köthen method
90.60
ISO 5269-3:2008
Pulps — Preparation of laboratory sheets for physical testing — Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system
90.93
ISO 5270:1979
Pulps — Laboratory sheets — Determination of physical properties
95.99
ISO 5270:1998
Pulps — Laboratory sheets — Determination of physical properties
95.99
ISO 5270:2012
Pulps — Laboratory sheets — Determination of physical properties
90.93
ISO 5350-1:1982
Pulps — Estimation of dirt and shives — Part 1: Unbleached chemical pulps
95.99
ISO 5350-1:1998
Pulp — Estimation of dirt and shives — Part 1: Inspection of laboratory sheets
95.99
ISO 5350-1:1998/Cor 1:1999
Pulp — Estimation of dirt and shives — Part 1: Inspection of laboratory sheets — Technical Corrigendum 1
95.99
ISO 5350-1:2006
Pulps — Estimation of dirt and shives — Part 1: Inspection of laboratory sheets by transmitted light
90.93
ISO 5350-2:1990
Pulps — Estimation of dirt and shives — Part 2: Bleached pulp
95.99
ISO 5350-2:1998
Pulp — Estimation of dirt and shives — Part 2: Inspection of mill sheeted pulp
95.99
ISO 5350-2:1998/Cor 1:1999
Pulp — Estimation of dirt and shives — Part 2: Inspection of mill sheeted pulp — Technical Corrigendum 1
95.99
ISO 5350-2:2006
Pulps — Estimation of dirt and shives — Part 2: Inspection of mill sheeted pulp by transmitted light
90.93
ISO 5350-3:1997
Pulps — Estimation of dirt and shives — Part 3: Inspection by reflected light
95.99
ISO 5350-3:2007
Pulps - Estimation of dirt and shives — Part 3: Visual inspection by reflected light using Equivalent Black Area (EBA) method
90.93
ISO 5350-4:2006
Pulps — Estimation of dirt and shives — Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method
90.93
ISO 5351-1:1981
Cellulose in dilute solutions — Determination of limiting viscosity number — Part 1: Method in cupri-ethylene-diamine (CED) solution
95.99
ISO 5351-2:1981
Cellulose in dilute solutions — Determination of limiting viscosity number — Part 2: Method in iron(III) sodium tartrate complex (EWNN mod NaCl) solution
95.99
ISO 5351:2004
Pulps — Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
95.99
ISO 5351:2010
Pulps — Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
90.93
ISO 5631-1:2009
Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees)
95.99
ISO 5631-1:2015
Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees)
60.60
ISO 5631-2:2008
Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)
95.99
ISO 5631-2:2014
Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)
95.99
ISO 5631-2:2015
Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)
60.60
ISO 5631-3:2008
Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees)
95.99
ISO 5631-3:2014
Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees)
95.99
ISO 5631-3:2015
Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees)
60.60
ISO 5631:2000
Paper and board — Determination of colour (C/2 degrees) — Diffuse reflectance method
95.99
ISO 5647:1990
Paper and board — Determination of titanium dioxide content
95.99
ISO 5647:2019
Paper and board — Determination of titanium dioxide content
60.60
ISO 6587:1980
Paper, board and pulps — Determination of conductivity of aqueous extracts
95.99
ISO 6587:1992
Paper, board and pulps — Determination of conductivity of aqueous extracts
90.92
ISO/DIS 6587
Paper, board and pulps — Determination of conductivity of aqueous extracts
40.99
ISO 6588-1:2005
Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction
95.99
ISO 6588-1:2012
Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction
90.92
ISO 6588-2:2005
Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction
95.99
ISO 6588-2:2012
Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction
90.92
ISO 6588:1981
Paper, board and pulps — Determination of pH of aqueous extracts
95.99
ISO/DIS 6588-1
Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction
40.60
ISO/DIS 6588-2
Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction
40.60
ISO 6924:1983
Correspondence envelopes — Vocabulary
95.99
ISO 7213:1981
Pulps — Sampling for testing
90.60
ISO 8254-1:1999
Paper and board — Measurement of specular gloss — Part 1: 75 degree gloss with a converging beam, TAPPI method
95.99
ISO 8254-1:2009
Paper and board — Measurement of specular gloss — Part 1: 75 degree gloss with a converging beam, TAPPI method
90.20
ISO 8254-2:2003
Paper and board — Measurement of specular gloss — Part 2: 75 degree gloss with a parallel beam, DIN method
95.99
ISO 8254-2:2016
Paper and board — Measurement of specular gloss — Part 2: 75 degree gloss with a parallel beam, DIN method
60.60
ISO 8254-3:2004
Paper and board — Measurement of specular gloss — Part 3: 20 degree gloss with a converging beam, TAPPI method
95.99
ISO 8254-3:2016
Paper and board — Measurement of specular gloss — Part 3: 20 degree gloss with a converging beam, TAPPI method
60.60
ISO 9184-1:1990
Paper, board and pulps — Fibre furnish analysis — Part 1: General method
90.92
ISO 9184-2:1990
Paper, board and pulps — Fibre furnish analysis — Part 2: Staining guide
90.93
ISO 9184-3:1990
Paper, board and pulps — Fibre furnish analysis — Part 3: Herzberg staining test
90.93
ISO 9184-4:1990
Paper, board and pulps — Fibre furnish analysis — Part 4: Graff "C" staining test
90.93
ISO 9184-5:1990
Paper, board and pulps — Fibre furnish analysis — Part 5: Lofton-Merritt staining test (modification of Wisbar)
90.93
ISO 9184-6:1994
Paper, board and pulps — Fibre furnish analysis — Part 6: Determination of fibre coarseness
90.93
ISO 9184-7:1994
Paper, board and pulps — Fibre furnish analysis — Part 7: Determination of weight factor
90.93
ISO/AWI 9184-1
Paper, board and pulps — Fibre furnish analysis — Part 1: General method
10.99
ISO 9197-1:1989
Paper, board and pulps — Determination of water-soluble chlorides — Part 1: General method
95.99
ISO 9197-2:1990
Paper, board and pulps — Determination of water-soluble chlorides — Part 2: Method for high purity products
95.99
ISO 9197:1998
Paper, board and pulps — Determination of water-soluble chlorides
95.99
ISO 9197:2006
Paper, board and pulps — Determination of water-soluble chlorides
95.99
ISO 9197:2016
Paper, board and pulps — Determination of water-soluble chlorides
60.60
ISO 9198:1989
Paper, board and pulps — Determination of water-soluble sulfates — Titrimetric method
95.99
ISO 9198:2001
Paper, board and pulp — Determination of water-soluble sulfates
90.92
ISO/DIS 9198
Paper, board and pulp — Determination of water-soluble sulfates
40.20
ISO 9416:1998
Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
95.99
ISO 9416:2009
Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
95.99
ISO 9416:2017
Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
60.60
ISO 9668:1990
Pulps — Determination of magnesium content — Flame atomic absorption spectrometric method
95.99
ISO 10376:2011
Pulps — Determination of mass fraction of fines
90.93
ISO/TR 10688:2015
Paper, board and pulps — Basic terms and equations for optical properties
60.60
ISO 10716:1994
Paper and board — Determination of alkali reserve
90.93
ISO 10775:1995
Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method
95.99
ISO 10775:2013
Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method
90.93
ISO 11093-1:1994
Paper and board — Testing of cores — Part 1: Sampling
90.93
ISO 11093-2:1994
Paper and board — Testing of cores — Part 2: Conditioning of test samples
90.93
ISO 11093-3:1994
Paper and board — Testing of cores — Part 3: Determination of moisture content using the oven drying method
90.93
ISO 11093-4:1997
Paper and board — Testing of cores — Part 4: Measurement of dimensions
95.99
ISO 11093-4:2016
Paper and board — Testing of cores — Part 4: Measurement of dimensions
90.92
ISO 11093-5:1994
Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation
95.99
ISO 11093-5:2009
Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation
95.99
ISO 11093-5:2009/Cor 1:2010
Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation — Technical Corrigendum 1
95.99
ISO 11093-5:2016
Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation
60.60
ISO 11093-6:1996
Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
95.99
ISO 11093-6:2005
Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
90.93
ISO 11093-7:1997
Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
95.99
ISO 11093-7:2011
Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
90.93
ISO 11093-8:1997
Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
95.99
ISO 11093-8:2012
Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
95.99
ISO 11093-8:2012/Cor 1:2013
Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis — Technical Corrigendum 1
95.99
ISO 11093-8:2017
Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
60.60
ISO 11093-9:1994
Paper and board — Testing of cores — Part 9: Determination of flat crush resistance
95.99
ISO 11093-9:2006
Paper and board — Testing of cores — Part 9: Determination of flat crush resistance
95.99
ISO 11093-9:2019
Paper and board — Testing of cores — Part 9: Determination of flat crush resistance
60.60
ISO/DIS 11093-4
Paper and board — Testing of cores — Part 4: Measurement of dimensions
40.98
ISO/TR 11371:2013
Pulps — Basic guidelines for laboratory refining
60.60
ISO 11475:1999
Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
95.99
ISO 11475:2004
Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
95.99
ISO 11475:2017
Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
60.60
ISO 11476:2000
Paper and board — Determination of CIE-whiteness, C/2 degree (indoor illumination conditions)
95.99
ISO 11476:2010
Paper and board — Determination of CIE whiteness, C/2 degrees (indoor illumination conditions)
95.99
ISO 11476:2016
Paper and board — Determination of CIE whiteness, C/2° (indoor illumination conditions)
60.60
ISO 11480:1997
Pulp, paper and board — Determination of total chlorine and organically bound chlorine
95.99
ISO 11480:2017
Pulp, paper and board — Determination of total chlorine and organically bound chlorine
60.60
ISO 12830:2011
Paper, board and pulps — Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium
95.99
ISO 12830:2019
Paper, board, pulps and cellulose nanomaterials — Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium
60.60
ISO 13542:1995
Paper and board — Specification for internal diameters of cores for reels
95.99
ISO 13542:2006
Paper and board — Specification for internal diameters of cores for reels
90.93
ISO 14436:2010
Pulps — Standard tap water for drainability measurements — Conductivity 40 mS/m to 150 mS/m
90.93
ISO 14453:1997
Pulps — Determination of acetone-soluble matter
95.99
ISO 14453:2014
Pulps — Determination of acetone-soluble matter
90.93
ISO 14487:1997
Pulps — Standard water for physical testing
90.93
ISO 15318:1999
Pulp, paper and board — Determination of 7 specified polychlorinated biphenyls (PCB)
90.93
ISO 15319:1999
Recycled pulps — Estimation of visible contraries by instrumental means using reflected light
95.99
ISO 15320:2003
Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract
95.99
ISO 15320:2011
Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract
90.93
ISO 15360-1:2000
Recycled pulps — Estimation of Stickies and Plastics — Part 1: Visual method
90.93
ISO 15360-2:2001
Recycled pulps — Estimation of Stickies and Plastics — Part 2: Image analysis method
95.99
ISO 15360-2:2001/Cor 1:2007
Recycled pulps — Estimation of Stickies and Plastics — Part 2: Image analysis method — Technical Corrigendum 1
95.99
ISO 15360-2:2015
Recycled pulps — Estimation of Stickies and Plastics — Part 2: Image analysis method
60.60
ISO 15361:2000
Pulps — Determination of zero-span tensile strength, wet or dry
90.93
ISO 16065-1:2001
Pulps — Determination of fibre length by automated optical analysis — Part 1: Polarized light method
95.99
ISO 16065-1:2014
Pulps — Determination of fibre length by automated optical analysis — Part 1: Polarized light method
90.93
ISO 16065-2:2007
Pulps — Determination of fibre length by automated optical analysis — Part 2: Unpolarized light method
95.99
ISO 16065-2:2014
Pulps — Determination of fibre length by automated optical analysis — Part 2: Unpolarized light method
90.93
ISO 17812:2007
Paper, board and pulps — Determination of total magnesium, total calcium, total manganese, total iron and total copper
90.93
ISO 18522:2016
Paper and board — Automated off-line testing of physical properties for CD (cross direction) profiles
60.60
ISO/TS 20460:2015
Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges
90.93
ISO/CD 21331
Graphic technology and deinked pulp - Guidance for assessing the deinking performance of printed paper products
30.60
ISO 21400:2018
Pulp — Determination of cellulose nanocrystal sulfur and sulfate half-ester content
60.60
ISO/CD 21436
Pulps — Determination of lignin content — Acid hydrolysis method
30.99
ISO/CD 21437
Pulps -Determination of carbohydrate composition
30.99
ISO/FDIS 21896
Paper, pulp, and recycling - Decolouration test of dye coloured paper products and paper products printed using dye inks
50.20
ISO/FDIS 21993
Paper and pulp — Deinkability test for printed paper products
50.20
ISO 22754:2008
Pulp and paper — Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
90.93
ISO 22891:2007
Paper — Determination of transmittance by diffuse reflectance measurement
95.99
ISO 22891:2013
Paper — Determination of transmittance by diffuse reflectance measurement
90.93
ISO 23713:2005
Pulps — Determination of fibre coarseness by automated optical analysis — Polarized light method
90.93
ISO 23714:2007
Pulps — Determination of water retention value (WRV)
95.99
ISO 23714:2014
Pulps — Determination of water retention value (WRV)
90.93
ISO/AWI 24196
Lignins — Determination of lignin content in kraft and biorefinery lignin
20.00
ISO/AWI 24215
Lignins — Determination of carbohydrate composition in kraft and biorefinery lignin
20.00
ISO/TR 24498:2006
Paper, board and pulps — Estimation of uncertainty for test methods
95.99
ISO/TR 24498:2019
Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons
60.60
ISO/TR 25477:2008
Paper, board and pulps - Basic guidelines for image analysis measurements
60.60
ISO 29681:2009
Paper, board and pulps — Determination of pH of salted water extracts
90.93

No matching records found. Please try changing the filter settings.