Withdrawal of ISO/R 273/1-1962

Withdrawal of ISO/R 273/2-1968

Slotted and castle nuts with metric thread

Slotted and castle nuts with metric thread 42 up to and including 100 mm thread diameter

Withdrawal of ISO/R 861-1968

Plain washers for metric bolts, screws and nuts — General plan

Plain washers for metric bolts, screws and nuts for general purposes — General plan

Plain washers for metric bolts, screws and nuts for general purposes — General plan — Technical Corrigendum 1

Mechanical properties of fasteners — Part 1: Bolts, screws and studs

Mechanical properties of fasteners — Part 1: Bolts, screws and studs

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs

Mechanical properties of fasteners — Part 2: Nuts with specified proof load values

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes

Withdrawal of ISO/R 898/3-1969

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes — Amendment 1

Withdrawal of ISO 898/4-1972

Mechanical properties of fasteners — Part 5: Set screws and similar threaded fasteners not under tensile stresses

Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread

Rivet shank diameters

Rivet shank diameters (diameter range 1 to 36 mm)

Slotted cheese head screws — Product grade A

Split pins — Metric series

Split pins

Tapping screws thread

Hexagon head tapping screws — Inch series

Slotted pan head screws — Product grade A

Slotted countersunk flat head screws (common head style) — Product grade A

Slotted raised countersunk head screws (common head style) — Product grade A

Prevailing torque type steel hexagon nuts — Mechanical and performance properties

Prevailing torque type steel hexagon nuts — Mechanical and performance properties

Prevailing torque type steel hexagon nuts — Mechanical and performance properties — Technical Corrigendum 1

Parallel pins, unhardened — Metric series

Parallel pins, unhardened

Parallel pins, of unhardened steel and austenitic stainless steel

Taper pins, unhardened — Metric series

Taper pins, unhardened

Clevis pins — Metric series

Clevis pins without head

Clevis pins with heads — Metric series

Clevis pins with head

Slotted headless screws — Metric series

Hexagon socket set screws — Metric series

Prevailing torque-type steel hexagon locknuts — Dimensions — Metric series

Prevailing torque-type steel hexagon locknuts — Dimensions — Inch series

Heat-treated steel tapping screws — Mechanical properties

Tapping screws according to ISO/R 1478 to 1483 — Minimum and maximum lengths

Fasteners — Acceptance inspection

Fasteners — Acceptance inspection

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs

Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs with specified grades and property classes

Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2: Nuts

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts

Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts with specified grades and property classes

Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress

Fasteners — Mechanical properties of corrosion resistant stainless steel fasteners — Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes

Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 4: Tapping screws

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws

Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws with specified grades and hardness classes

Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications

Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners

Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 7: Flat washers with specified grades and property classes

Corrosion-resistant stainless steel fasteners — Specifications

Threaded fasteners — Axial load fatigue testing — Part 1: Test methods

Hexagon head bolts — Product grades A and B

Hexagon head bolts — Product grades A and B

Hexagon head bolts — Product grade C

Hexagon head bolts — Product grade C

Hexagon head screws — Product grades A and B

Hexagon head screws — Product grades A and B

Hexagon head screws — Product grade C

Hexagon head screws — Product grade C

Hexagon socket set screws with flat point

Hexagon socket set screws with flat point

Hexagon socket set screws with cone point

Hexagon socket set screws with cone point

Hexagon socket set screws with dog point

Hexagon socket set screws with dog point

Hexagon socket set screws with cup point

Hexagon socket set screws with cup point

Hexagon nuts, style 1 — Product grades A and B

Hexagon nuts, style 1 — Product grades A and B

Hexagon nuts, style 2 — Product grades A and B

Hexagon nuts — Product grade C

Hexagon nuts — Product grade C

Hexagon thin nuts — Product grades A and B (chamfered)

Hexagon thin nuts (chamfered) — Product grades A and B

Hexagon thin nuts — Product grade B (unchamfered)

Threaded components — Electroplated coatings

Hexagon nuts with flange — Product grade A

Hexagon nuts for fine mechanics — Product grade F

Tolerances for fasteners — Part 3: Plain washers for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm — Product grades A and C

Tolerances for fasteners — Part 3: Plain washers for bolts, screws and nuts — Product grades A and C

Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F

Hexagon socket head cap screws — Product grade A

Hexagon socket head cap screws — Product grade A — Amendment 1

Hexagon socket head cap screws — Product grade A

Hexagon socket head cap screws

Hexagon nuts for high-strength structural bolting with large width across flats — Product grade B — Property classes 8 and 10

Fasteners — Threaded fasteners with pre-applied adhesives

Fasteners — Surface discontinuities — Part 4: Washers

Prevailing torque type hexagon nuts (with non-metallic insert), style 1 — Property classes 5, 8 and 10

Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12

Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12

Prevailing torque type all-metal hexagon nuts, style 2 — Property classes 5, 8, 10 and 12

Prevailing torque type hexagon nuts with flange (with non-metallic insert)

Prevailing torque type all-metal hexagon nuts with flange

Cross-recessed pan head screws — Product grade A

Cross recessed countersunk flat head screws (common head style) — Product grade A and property class 4.8 only

Cross-recessed raised countersunk head screws (common head style) — Product grade A

Mechanical and performance requirements of case hardened and tempered metric thread rolling screws

Plain washers — Normal series — Product grade A

Plain washers — Normal series — Product grade A

Plain washers — Normal series — Product grade A

Plain washers, chamfered — Normal series — Product grade A

Plain washers, chamfered — Normal series — Product grade A

Plain washers, chamfered — Normal series — Product grade A

Plain washers — Normal series — Product grade C

Plain washers — Normal series — Product grade C

Plain washers — Normal series — Product grade C

Plain washers — Small series — Product grade A

Plain washers — Small series — Product grade A

Plain washers — Small series — Product grade A

Plain washers — Large series — Part 1: Product grade A

Plain washers — Large series — Part 1: Product grade A

Plain washers — Large series — Part 2: Product grade C

Plain washers — Large series — Part 2: Product grade C

Plain washers — Large series — Product grades A and C

Plain washers — Extra large series — Product grade C

Plain washers — Extra large series — Product grade C

Plain washers — Extra large series — Product grade C — Technical Corrigendum 1

Plain washers — Extra large series — Product grade C

Hexagon socket button head screws — Metric series

Hexagon socket button head screws

Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) — Product grade C — Property classes 8.8 and 10.9

Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) — Product grade C — Property classes 8.8 and 10.9

Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) — Product grades A and B — Property classes 5, 6 and 8

Hexagon nuts for structural bolting with large width across flats, style 1 — Product grade B — Property class 10

Plain washers, chamfered, hardened and tempered for high-strength structural bolting

Hexagon nuts for structural bolting — Style 2, hot-dip galvanized (oversize tapped) — Product grade A — Property class 9

Prevailing torque type all-metal hexagon nuts, style 1 — Property classes 5, 8 and 10

Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9

Hexagon nuts, style 1, with metric fine pitch thread — Product grades A and B

Hexagon nuts, style 2, with metric fine pitch thread — Product grades A and B

Hexagon thin nuts with metric fine pitch thread — Product grades A and B

Hexagon head screws with metric fine pitch thread — Product grades A and B

Cup head square neck bolts with large head — Product grade C

Parallel pins with internal thread, unhardened

Parallel pins with internal thread, of unhardened steel and austenitic stainless steel

Parallel pins, hardened (Dowel pins)

Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)

Parallel pins with internal thread, hardened

Parallel pins with internal thread, of hardened steel and martensitic stainless steel

Taper pins with internal thread, unhardened

Taper pins with external thread, unhardened

Plain washers for clevis pins — Product grade A

Grooved pins — Full-length parallel grooved, with pilot

Grooved pins — Full-length parallel grooved, with pilot

Fasteners — Parallel grooved pins, with pilot point — Full-length diamond grooves

Grooved pins — Full length parallel grooved, with chamfer

Grooved pins — Full-length parallel grooved, with chamfer

Fasteners — Parallel grooved pins, with chamfer point — Full-length diamond grooves

Grooved pins — Half-length reverse taper grooved

Grooved pins — Half-length reverse-taper grooved

Fasteners — Reverse-taper grooved pins — Half-length progressive grooves

Grooved pins — Third-length centre grooved

Grooved pins — One-third-length centre grooved

Fasteners — Grooved pins — One-third-length center grooves

Grooved pins — Half-length centre grooved

Grooved pins — Half-length centre grooved

Fasteners — Grooved pins — Half-length centre grooves

Grooved pins — Full-length taper grooved

Grooved pins — Full-length taper grooved

Fasteners — Taper grooved pins — Full-length progressive grooves

Grooved pins — Half-length taper grooved

Grooved pins — Half-length taper grooved

Fasteners — Taper grooved pins — Half-length progressive grooves

Grooved pins with round head

Grooved pins with round head

Fasteners — Grooved pins with round head — Full-length diamond grooves

Grooved pins with countersunk head

Grooved pins with countersunk head

Fasteners — Grooved pins with countersunk head — Full-length diamond grooves

Spring-type straight pins — Coiled, heavy duty

Spring-type straight pins — Coiled, heavy duty

Spring-type straight pins — Coiled, heavy duty

Pins and grooved pins — Shear test

Spring-type straight pins — Coiled, standard duty

Spring-type straight pins — Coiled, standard duty

Spring-type straight pins — Coiled, standard duty

Spring-type straight pins — Coiled, light duty

Spring-type straight pins — Coiled, light duty

Spring-type straight pins — Coiled, light duty

Spring-type straight pins, slotted

Spring-type straight pins — Slotted, heavy duty

Spring-type straight pins — Slotted, heavy duty

Hexagon head bolts with metric fine pitch thread — Product grades A and B

Hexagon socket countersunk head screws

Hexalobular internal driving feature for bolts and screws

Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A

Spring-type straight pins — Slotted, light duty

Spring-type straight pins — Slotted, light duty

Fasteners — Grooved pins — General requirements

Fasteners — Reverse-taper grooved pins — One quarter-length progressive grooves on both sides

Fasteners — Parallel grooved pins — Half-length diamond grooves

Hexalobular socket pan head screws — Technical Corrigendum 1

Blind rivets — Terminology and definitions

Blind rivets — Mechanical testing

Hexagon bolts with flange — Small series — Product grade A — Technical Corrigendum 1

Closed end blind rivets with break pull mandrel and protruding head — AlA/St

Closed end blind rivets with break pull mandrel and countersunk head — AlA/St

Closed end blind rivets with break pull mandrel and protruding head — AI/AIA

Closed end blind rivets with break pull mandrel and protruding head — St/St

Open end blind rivets with break pull mandrel and protruding head — AIA/St

Open end blind rivets with break pull mandrel and countersunk head — AIA/St

Open end blind rivets with break pull mandrel and protruding head — St/St

Open end blind rivets with break pull mandrel and countersunk head — St/St

Open end blind rivets with break pull mandrel and protruding head — AIA/AIA

Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA

Open end blind rivets with break pull mandrel and protruding head — A2/A2

Open end blind rivets with break pull mandrel and countersunk head — A2/A2

Passivation of corrosion-resistant stainless-steel fasteners

Open end blind rivets with break pull mandrel and protruding head — Cu/St or Cu/Br or Cu/SSt

Open end blind rivets with break pull mandrel and countersunk head — Cu/St or Cu/Br or Cu/SSt

Open end blind rivets with break pull mandrel and protruding head — NiCu/St or NiCu/SSt

Closed end blind rivets with pull mandrel and protruding head — A2/SSt

Hexagon socket head cap screws with metric fine pitch thread

Fasteners — Flat washers with inside chamfer of medium series — Product grade A