Создание прочной инфраструктуры, содействие обеспечению всеохватной и устойчивой индустриализации и внедрению инноваций

Международные стандарты ИСО способствуют устойчивому промышленному развитию в соответствии с международными согласованными спецификациями, в которых содержатся требования к качеству, безопасности и устойчивости.

Распространяясь практически на все отрасли деятельности, международные стандарты ИСО способствуют повышению уверенности у инвесторов и потребителей, создавая благоприятную среду для производства продукции и предоставления услуг. Более того, стандарты ИСО являются универсальным языком, который позволяет преодолевать технические барьеры в международной торговле. Внедрение международных стандартов имеет важное значение в особенности для развивающихся стран, поскольку позволяет им более достойно конкурировать на мировом рынке.

В ИСО также разработаны стандарты, целью которых является содействие предпринимательству и налаживанию взаимодействия. К данным стандартам относится ISO 44001, Системы управления взаимоотношениями с клиентами в совместном бизнесе. Требования и структура, который формирует общую платформу, с помощью которой можно максимизировать преимущества от совместной работы и оказать помощь компаниям в установлении здоровых деловых отношений как на внутреннем уровне, так и между организациями.

Стандарты являются важным инструментом для создания жизнеспособной инфраструктуры. Например, в ИСО разработано более тысячи документов, затрагивающих вопросы строительной промышленности, которые представляют собой согласованные на международном уровне руководства и спецификации для всех типов и химических составов почв, которые могут находиться на крышах данных сооружений. Они включают не только необходимые уровни безопасности и производительности, но также серию методов испытаний на устойчивость.

Международные стандарты ИСО служат платформой для повышения уровня совместимости, привлечения инвестиций и поддержки инноваций. Кроме того, текущая работа ИСО по управлению инновационной деятельностью будет включать проверенные технологии, которые помогут организациям раскрыть свой инновационный потенциал. К данным документам относятся ISO 56002 на системы управления инновациями и ISO 56003 на инструменты и методы для совместных новаторских решений.

Узнайте больше

  • Титульный лист: ISO and construction
    ISO and construction
    This brochure gives a concise overview of ISO's substantial portfolio of International Standards for the construction sector. It underlines how ISO standards tackle the challenges of sustainable development at the same time as providing requirements for technical and functional performance.

 

Более детально с нашими статьями и видео Вы можете ознакомиться на специализированном микросайте:

  • #hitechstandards
    Find out more about the role of ISO standards in shaping tomorrow's tech.
  • #innovators

    Dare to dream big with ISO standards.

563 стандарта разработаны для достижения ЦУР 9

Стандарт и/или проект сектора ТК
IWA 28:2018
Faecal sludge treatment units — Energy independent, prefabricated, community-scale resource-recovery units — Safety and performance
ISO/TMBG
ISO 265-1:1988
Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series — Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
Машиностроение ISO/TC 138/SC 1
ISO/AWI 561
Coal preparation plant — Graphical symbols
Энергия ISO/TC 27/SC 1
ISO/AWI 771
Oilseed meals — Determination of moisture and volatile matter content
Еда и сельское хозяйств ISO/TC 34/SC 2
ISO/WD 1431-4
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 4: Under high humidity condition
Неметаллические материалы ISO/TC 45/SC 2
ISO/AWI 1704
Ships and marine technology — Stud-link anchor chains
Транспорт ISO/TC 8/SC 4
ISO/DIS 1833-29
Textiles — Quantitative chemical analysis — Part 29: Mixtures of polyamide with polypropylene/polyamide bicomponent (method using sulfuric acid)
Неметаллические материалы ISO/TC 38
ISO/WD PAS 1996-3
Acoustics — Description, measurement and assessment of environmental noise — Part 3: Objective method for the measurement of prominence of impulsive sounds and for adjustment of LAeq
Горизонтальные предметы ISO/TC 43/SC 1
ISO 2067:2019
Granulated cork, broken cork and crushed cork — Sampling for the determination of moisture content
Еда и сельское хозяйств ISO/TC 87
ISO 3008-1:2019
Fire resistance tests — Door and shutter assemblies — Part 1: General requirements
Здания и сооружения ISO/TC 92/SC 2
ISO 3008-2:2017
Fire-resistance tests — Part 2: Lift landing door assemblies
Здания и сооружения ISO/TC 92/SC 2
ISO 3008-3:2016
Fire resistance tests — Part 3: Door and shutter assemblies horizontally oriented
Здания и сооружения ISO/TC 92/SC 2
ISO/WD 3079
A Two-Electrode Method of Using Acetic Acid to Measure Pitting Potential of Aluminium and Aluminium Alloys in Chloride Solution
Руды и металлы ISO/TC 156
ISO/WD 3533
Sex toys — Design and safety requirements for products in direct contact with genitalia, the anus, or both
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/PC 325
ISO 3633:2002
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Unplasticized poly(vinyl chloride) (PVC-U)
Машиностроение ISO/TC 138/SC 1
ISO 3839:1996/PRF Amd 1
Petroleum products — Determination of bromine number of distillates and aliphatic olefins — Electrometric method — Amendment 1
Энергия ISO/TC 28
ISO/CD 3951-6
Sampling procedures for inspection by variables — Part 6: Specification for single sampling plans indexed by limiting quality (LQ)
Горизонтальные предметы ISO/TC 69/SC 5
ISO/WD 4254-19
Agricultural machinery — Safety — Part 19: Feed mixing machines
Транспорт ISO/TC 23/SC 3
ISO/WD 4373
Hydrometry — Water level measuring devices
Специальные технологии ISO/TC 113/SC 5
ISO 4435:2003
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U)
Машиностроение ISO/TC 138/SC 1
ISO/CD 4568
Shipbuilding — Sea-going vessels — Windlasses and anchor capstans
Транспорт ISO/TC 8/SC 4
ISO/AWI 6344-2
Coated abrasives — Grain size analysis — Part 2: Determination of grain size distribution of macrogrits P12 to P220
Машиностроение ISO/TC 29/SC 5
ISO/AWI 6344-3
Coated abrasives — Grain size analysis — Part 3: Determination of grain size distribution of microgrits P240 to P5000
Машиностроение ISO/TC 29/SC 5
ISO 6707-1:2017
Buildings and civil engineering works — Vocabulary — Part 1: General terms
Здания и сооружения ISO/TC 59/SC 2
ISO 6707-2:2017
Buildings and civil engineering works — Vocabulary — Part 2: Contract and communication terms
Здания и сооружения ISO/TC 59/SC 2
ISO 6707-3:2017
Buildings and civil engineering works — Vocabulary — Part 3: Sustainability terms
Здания и сооружения ISO/TC 59/SC 2
ISO/AWI 6707-3
Buildings and civil engineering works — Vocabulary — Part 3: Sustainability terms
Здания и сооружения ISO/TC 59/SC 2
ISO/DIS 6707-1
Buildings and civil engineering works — Vocabulary — Part 1: General terms
Здания и сооружения ISO/TC 59/SC 2
ISO/TS 7024:2005
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Thermoplastics — Recommended practice for installation
Машиностроение ISO/TC 138/SC 1
ISO/WD 7240-31
Fire detection and fire alarm systems — Part 31: Resettable line-type heat detectors
Здания и сооружения ISO/TC 21/SC 3
ISO/WD 7240-32
Fire detection and fire alarm systems — Part 32: Non-resettable line-type heat detectors
Здания и сооружения ISO/TC 21/SC 3
ISO/WD 7278-6
Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 6: Pipe Provers
Энергия ISO/TC 28/SC 2
ISO 7671:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polypropylene (PP)
Машиностроение ISO/TC 138/SC 1
ISO 7675:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Chlorinated poly(vinyl chloride) (PVC-C)
Машиностроение ISO/TC 138/SC 1
ISO 7682:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene (ABS)
Машиностроение ISO/TC 138/SC 1
ISO/CD TS 8000-81
Data quality — Part 81: Data quality assessment: Profiling
Информационные технологии, графика и фотография ISO/TC 184/SC 4
ISO/NP 8000-51
Data quality — Part 51: Data governance: exchange of data policy statements
Информационные технологии, графика и фотография ISO/TC 184/SC 4
ISO/NP TS 8000-82
Data quality — Part 82: Data quality assessment: Creating data rules
Информационные технологии, графика и фотография ISO/TC 184/SC 4
ISO/WD 8102-20
Electrical requirements for lifts, escalators and moving walks — Part 20: Cybersecurity
Здания и сооружения ISO/TC 178
ISO 8283-1:1991
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
Машиностроение ISO/TC 138/SC 1
ISO 8283-2:1992
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE)
Машиностроение ISO/TC 138/SC 1
ISO 8283-3:1992
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)
Машиностроение ISO/TC 138/SC 1
ISO 8283-4:1992
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)
Машиностроение ISO/TC 138/SC 1
ISO 8770:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polyethylene (PE)
Машиностроение ISO/TC 138/SC 1
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
Машиностроение ISO/TC 138/SC 1
ISO 8773:2006
Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP)
Машиностроение ISO/TC 138/SC 1
ISO 9001:2015
Quality management systems — Requirements
Бизнес, менеджмент и инновации ISO/TC 176/SC 2
ISO 9004:2018
Quality management — Quality of an organization — Guidance to achieve sustained success
Бизнес, менеджмент и инновации ISO/TC 176/SC 2
ISO/AWI 9727-8
Cylindrical cork stoppers — Physical tests — Part 8: Determination of capillarity
Еда и сельское хозяйств ISO/TC 87
ISO 9849:2017
Optics and optical instruments — Geodetic and surveying instruments — Vocabulary
Специальные технологии ISO/TC 172/SC 6
ISO 9896:1996
Plastics traps for discharge pipework systems inside buildings
Машиностроение ISO/TC 138/SC 1
ISO/IEC WD 9995-11
Information technology — Keyboard layouts for office systems — Part 11: Functionality of dead keys and repertoires of characters entered by dead keys
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 35
ISO/IEC WD 9995-3
Information technology — Keyboard layouts for text and office systems — Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 35
ISO/IEC WD 9995-7
Information technology — Keyboard layouts for text and office systems — Part 7: Symbols used to represent functions
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 35
ISO 10001:2018
Quality management — Customer satisfaction — Guidelines for codes of conduct for organizations
Бизнес, менеджмент и инновации ISO/TC 176/SC 3
ISO 10002:2018
Quality management — Customer satisfaction — Guidelines for complaints handling in organizations
Бизнес, менеджмент и инновации ISO/TC 176/SC 3
ISO 10003:2018
Quality management — Customer satisfaction — Guidelines for dispute resolution external to organizations
Бизнес, менеджмент и инновации ISO/TC 176/SC 3
ISO 10008:2013
Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic commerce transactions
Бизнес, менеджмент и инновации ISO/TC 176/SC 3
ISO/WD 10010
Quality management — Guidance to evaluate and improve quality culture to drive sustained success
Бизнес, менеджмент и инновации ISO/TC 176/SC 3
ISO/DIS 10014
Quality management systems — Managing an organization for quality results — Guidance for realizing financial and economic benefits
Бизнес, менеджмент и инновации ISO/TC 176/SC 3
ISO 10015:2019
Quality management — Guidelines for competence management and people development
Бизнес, менеджмент и инновации ISO/TC 176/SC 3
ISO/CD 10017
Quality management - Guidance for statistical techniques for ISO 9001
Бизнес, менеджмент и инновации ISO/TC 176/SC 3
ISO/FDIS 10018
Quality management — Guidelines for people engagement
Бизнес, менеджмент и инновации ISO/TC 176/SC 3
ISO/AWI 10121-3
Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 3: Classification system for treatment of make up air
Машиностроение ISO/TC 142
ISO/AWI TS 10300-20
Calculation of load capacity of bevel gears — Part 20: Calculation of scuffing load capacity; Flash temperature method
Машиностроение ISO/TC 60/SC 2
ISO/AWI 10303-59
Industrial automation systems and integration — Product data representation and exchange — Part 59: Integrated generic resource: Quality of product shape data
Информационные технологии, графика и фотография ISO/TC 184/SC 4
ISO/AWI TS 10303-15
Industrial automation systems and integration — Product data representation and exchange — Part 15: Description methods: SysML XMI to XSD transformation
Информационные технологии, графика и фотография ISO/TC 184/SC 4
ISO/AWI TS 10303-16
Industrial automation systems and integration — Product data representation and exchange — Part 16: Description methods: SysML XMI to EXPRESS transformation
Информационные технологии, графика и фотография ISO/TC 184/SC 4
ISO/AWI TS 10303-17
Industrial automation systems and integration — Product data representation and exchange — Part 17: EXPRESS to SysML XMI transformation
Информационные технологии, графика и фотография ISO/TC 184/SC 4
ISO/AWI TS 10303-4000
Industrial automation systems and integration — Product data representation and exchange — Part 4000: Core Model
Информационные технологии, графика и фотография ISO/TC 184/SC 4
ISO/AWI 10497
Testing of valves — Fire type-testing requirements
Машиностроение ISO/TC 153
ISO/WD 10605
Road vehicles — Test methods for electrical disturbances from electrostatic discharge
Транспорт ISO/TC 22/SC 32
ISO/DIS 10631
Industrial valves - Metallic butterfly valves
Машиностроение ISO/TC 153
ISO/WD 10813-4
Vibration-generating machines — Guidance for selection — Part 4: Equipment for multi-axial environmental testing
Машиностроение ISO/TC 108/SC 6
ISO/WD 11093-4
Paper and board — Testing of cores — Part 4: Measurement of dimensions
Неметаллические материалы ISO/TC 6
ISO/CD 11114-5
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 5: Test methods for selecting plastic liners
Машиностроение ISO/TC 58
ISO/AWI 11128
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives
Химическая продукция ISO/TC 35/SC 12
ISO/WD 11296-9
Plastics piping systems for the renovation of underground non-pressure drainage and sewerage networks — Part 9: Lining with a rigidly anchored plastics inner layer
Машиностроение ISO/TC 138/SC 8
ISO/DIS 11298-4
Plastics piping systems for renovation of underground water supply networks — Part 4: Lining with cured-in-place pipes
Машиностроение ISO/TC 138/SC 8
ISO/DIS 11357-8
Plastics — Differential scanning calorimetry — Part 8: Determination of thermal conductivity
Неметаллические материалы ISO/TC 61/SC 5
ISO/AWI 11783-13
Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 13: File server
Транспорт ISO/TC 23/SC 19
ISO/AWI 11783-7
Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer
Транспорт ISO/TC 23/SC 19
ISO/CD 11901-5
Tools for pressing — Gas springs — Part 5: Safety instructions for usage
Машиностроение ISO/TC 29/SC 8
ISO/WD 12620-2
Computer applications in terminology — Data categories — Part 2: Data category repository administration
Горизонтальные предметы ISO/TC 37/SC 3
ISO/CD 12642-3
Graphic technology — Input data for characterization of 4-colour process printing — Part 3: Part 3: Extended data set
Информационные технологии, графика и фотография ISO/TC 130
ISO/CD 12856-1
Railway applications — Polymeric composite sleepers bearers and transoms — Part 1: Material characteristics
Транспорт ISO/TC 269/SC 1
ISO/CD 12856-3
Railway applications — Polymeric composite sleepers bearers and transoms — Part 3: General requirements
Транспорт ISO/TC 269/SC 1
ISO/DIS 12925-2
Lubricants, industrial oils and related products (class L) — Family C (Gears) — Part 2: Specifications of categories CKH, CKJ and CKM (lubricants open and semi-enclosed gear systems)
Энергия ISO/TC 28/SC 4
ISO/WD 12925-3
Lubricants, Industrial oils and related products (Class L) — Family C (gears) — Part 3: Part 3: specifications of categories CKG and CKL (greases for open and semi-enclosed gear systems)
Энергия ISO/TC 28/SC 4
ISO 13088:2011/DAmd 1
Gas cylinders — Acetylene cylinder bundles — Filling conditions and filling inspection — Amendment 1
Машиностроение ISO/TC 58/SC 4
ISO/WD 13111-2
Intelligent transport systems (ITS) — The use of personal ITS station to support ITS service provision for travelers — Part 2: General requirements for data exchange between personal ITS station and other ITS stations
Транспорт ISO/TC 204
ISO 13229:2010
Thermoplastics piping systems for non-pressure applications — Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings — Determination of the viscosity number and K-value
Машиностроение ISO/TC 138/SC 1
ISO 13254:2010
Thermoplastics piping systems for non-pressure applications — Test method for watertightness
Машиностроение ISO/TC 138/SC 1
ISO 13255:2010
Thermoplastics piping systems for soil and waste discharge inside buildings — Test method for airtightness of joints
Машиностроение ISO/TC 138/SC 1
ISO 13257:2018
Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
Машиностроение ISO/TC 138/SC 1
ISO 13259:2018
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
Машиностроение ISO/TC 138/SC 1
ISO 13260:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading
Машиностроение ISO/TC 138/SC 1
ISO 13260:2010/Amd 1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading — Amendment 1
Машиностроение ISO/TC 138/SC 1
ISO 13262:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics spirally-formed structured-wall pipes — Determination of the tensile strength of a seam
Машиностроение ISO/TC 138/SC 1
ISO 13263:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength
Машиностроение ISO/TC 138/SC 1
ISO 13264:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings
Машиностроение ISO/TC 138/SC 1
ISO 13265:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
Машиностроение ISO/TC 138/SC 1
ISO 13266:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
Машиностроение ISO/TC 138/SC 1
ISO 13267:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
Машиностроение ISO/TC 138/SC 1
ISO 13268:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
Машиностроение ISO/TC 138/SC 1
ISO 13272:2011
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
Машиностроение ISO/TC 138/SC 1
ISO/AWI TS 13399-90
Cutting tool data representation and exchange — Part 90: Container file for exchange of properties, data and 3D models
Машиностроение ISO/TC 29
ISO/WD TS 13399-6
Cutting tool data representation and exchange — Part 6: Assembly of cutting tool components
Машиностроение ISO/TC 29
ISO 13579-11:2017
Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating energy efficiency — Part 11: Evaluation of various kinds of efficiency
Машиностроение ISO/TC 244
ISO 13579-1:2013
Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 1: General methodology
Машиностроение ISO/TC 244
ISO 13579-3:2013
Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 3: Batch-type aluminium melting furnaces
Машиностроение ISO/TC 244
ISO 13579-4:2013
Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 4: Furnaces with protective or reactive atmosphere
Машиностроение ISO/TC 244
ISO 14001:2015
Environmental management systems — Requirements with guidance for use
Устойчивое развитие и окружающая среда ISO/TC 207/SC 1
ISO/AWI 14015
Environmental management — Environmental Due Diligence Assessment (revision of ISO 14015:2001)
Устойчивое развитие и окружающая среда ISO/TC 207/SC 2
ISO/CD 14030-1
Environmental performance evaluation — Green debt instruments — Part 1: Process for green bonds
Устойчивое развитие и окружающая среда ISO/TC 207/SC 4
ISO 14064-1:2018
Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals
Устойчивое развитие и окружающая среда ISO/TC 207/SC 7
ISO 14064-2:2019
Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
Устойчивое развитие и окружающая среда ISO/TC 207/SC 7
ISO 14064-3:2019
Greenhouse gases — Part 3: Specification with guidance for the verification and validation of greenhouse gas statements
Устойчивое развитие и окружающая среда ISO/TC 207/SC 7
ISO/DIS 14065
Greenhouse gases — Environmental information — Requirements for bodies validating and verifying environmental information
Устойчивое развитие и окружающая среда ISO/TC 207/SC 7
ISO/NP TS 14074
Environmental management — Life cycle assessment — Principles, requirements and guidelines for normalization, weighting and interpretation
Устойчивое развитие и окружающая среда ISO/TC 207/SC 5
ISO/AWI 14184-3
Textiles — Determination of formaldehyde — Part 3: Free and hydrolysed formaldehyde (water extraction method) — Determination by liquid chromatography
Неметаллические материалы ISO/TC 38
ISO/CD 14298
Graphic technology — Management of security printing processes
Информационные технологии, графика и фотография ISO/TC 130
ISO/DIS 14404-4
Calculation method of carbon dioxide emission intensity from iron and steel production — Part 4: Guidance for using ISO 14404 family
Руды и металлы ISO/TC 17
ISO/PRF TS 14521
Gears — Calculation of load capacity of worm gears
Машиностроение ISO/TC 60/SC 1
ISO/AWI 14533-2
Processes, data elements and documents in commerce, industry and administration — Long term signature profiles — Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES)
Информационные технологии, графика и фотография ISO/TC 154
ISO/AWI 14649-2
Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 2: General process data
Информационные технологии, графика и фотография ISO/TC 184/SC 1
ISO/AWI 14649-3
Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 3: Manufacturing features
Информационные технологии, графика и фотография ISO/TC 184/SC 1
ISO/AWI 14649-4
Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 4: Process data for cutting
Информационные технологии, графика и фотография ISO/TC 184/SC 1
ISO/AWI 14649-5
Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 5: Tools for cutting operations
Информационные технологии, графика и фотография ISO/TC 184/SC 1
ISO/WD 14839-5
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 5: Touch-down bearings
Машиностроение ISO/TC 108/SC 2
ISO 15392:2019
Sustainability in buildings and civil engineering works — General principles
Здания и сооружения ISO/TC 59/SC 17
ISO 15398:2012
Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
Машиностроение ISO/TC 138/SC 1
ISO/AWI 15500-21
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 21: Vent line closures
Транспорт ISO/TC 22/SC 41
ISO/AWI 15639-2
Standardization of injection sites for different animal species — Part 2: Equine (horses, donkeys, and zebras)
Транспорт ISO/TC 23/SC 19
ISO/WD 15686-10
Buildings and constructed assets — Service life planning — Part 10: When to assess functional performance
Здания и сооружения ISO/TC 59/SC 14
ISO/WD TS 15926-11
Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 11: Methodology for simplified industrial usage of reference data
Информационные технологии, графика и фотография ISO/TC 184/SC 4
ISO 16075-1:2015
Guidelines for treated wastewater use for irrigation projects — Part 1: The basis of a reuse project for irrigation
Устойчивое развитие и окружающая среда ISO/TC 282/SC 1
ISO 16075-2:2015
Guidelines for treated wastewater use for irrigation projects — Part 2: Development of the project
Устойчивое развитие и окружающая среда ISO/TC 282/SC 1
ISO 16075-3:2015
Guidelines for treated wastewater use for irrigation projects — Part 3: Components of a reuse project for irrigation
Устойчивое развитие и окружающая среда ISO/TC 282/SC 1
ISO 16075-4:2016
Guidelines for treated wastewater use for irrigation projects — Part 4: Monitoring
Устойчивое развитие и окружающая среда ISO/TC 282/SC 1
ISO/CD 16610-45
Geometrical product specifications (GPS) — Filtration — Part 45: Part 45: Profile Morphological: Segmentation
Информационные технологии, графика и фотография ISO/TC 213
ISO/CD 16684-3
Graphic technology — Extensible metadata platform (XMP) — Part 3: JSON-LD serialization of XMP
Информационные технологии, графика и фотография ISO/TC 171/SC 2
ISO 16745-1:2017
Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 1: Calculation, reporting and communication
Здания и сооружения ISO/TC 59/SC 17
ISO 16745-2:2017
Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 2: Verification
Здания и сооружения ISO/TC 59/SC 17
ISO/WD 16840-3
Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 173/SC 1
ISO 16923:2016
Natural gas fuelling stations — CNG stations for fuelling vehicles
ISO/TMBG
ISO 16924:2016
Natural gas fuelling stations — LNG stations for fuelling vehicles
ISO/TMBG
ISO/CD TS 17021-12
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 12: Competence requirements for auditing and certification of collaborative business relationship management systems
ISO/CASCO
ISO/IEC NP 17030
Conformity assessment — General requirements for third-party marks of conformity
ISO/CASCO
ISO/AWI TS 17117-2
Health informatics — Terminological resources — Part 2: Implementation Capability (TIC)
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 215
ISO 17123-1:2014
Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 1: Theory
Специальные технологии ISO/TC 172/SC 6
ISO 17123-4:2012
Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM measurements to reflectors)
Специальные технологии ISO/TC 172/SC 6
ISO 17123-6:2012
Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers
Специальные технологии ISO/TC 172/SC 6
ISO 17123-8:2015
Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 8: GNSS field measurement systems in real-time kinematic (RTK)
Специальные технологии ISO/TC 172/SC 6
ISO 17123-9:2018
Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 9: Terrestrial laser scanners
Специальные технологии ISO/TC 172/SC 6
ISO 17225-1:2014
Solid biofuels — Fuel specifications and classes — Part 1: General requirements
Энергия ISO/TC 238
ISO 17225-2:2014
Solid biofuels — Fuel specifications and classes — Part 2: Graded wood pellets
Энергия ISO/TC 238
ISO 17225-3:2014
Solid biofuels — Fuel specifications and classes — Part 3: Graded wood briquettes
Энергия ISO/TC 238
ISO 17225-4:2014
Solid biofuels — Fuel specifications and classes — Part 4: Graded wood chips
Энергия ISO/TC 238
ISO 17225-5:2014
Solid biofuels — Fuel specifications and classes — Part 5: Graded firewood
Энергия ISO/TC 238
ISO 17225-6:2014
Solid biofuels — Fuel specifications and classes — Part 6: Graded non-woody pellets
Энергия ISO/TC 238
ISO 17225-7:2014
Solid biofuels — Fuel specifications and classes — Part 7: Graded non-woody briquettes
Энергия ISO/TC 238
ISO/TS 17225-8:2016
Solid biofuels — Fuel specifications and classes — Part 8: Graded thermally treated and densified biomass fuels
Энергия ISO/TC 238
ISO/DIS 17442-1
Financial services — Legal entity identifier (LEI) — Part 1: Assignment
Услуги ISO/TC 68/SC 8
ISO/AWI 17727
Cork — Cork stoppers for still wine — Sampling plan for the quality control of cork stoppers
Еда и сельское хозяйств ISO/TC 87
ISO/TS 17902:2016
Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
Машиностроение ISO/TC 138/SC 1
ISO 17962:2015/WD Amd 1
Agricultural machinery — Equipment for sowing — Minimization of the environmental effects of fan exhaust from pneumatic systems — Amendment 1: Agricultural machinery — Equipment for sowing — Minimization of the environmental effects of fan exhaust from pneumatic systems — Amendment
Транспорт ISO/TC 23/SC 3
ISO/IEC CD 18000-63
Information technology — Radio frequency identification for item management — Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 31
ISO 18091:2019
Quality management systems — Guidelines for the application of ISO 9001 in local government
Бизнес, менеджмент и инновации ISO/TC 176
ISO/IEC CD 18181
Information technology — JPEG XL Image Coding System
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 29
ISO/CD 18314-5
Analytical colorimetry — Part 5: Colorimetric determination of colour differences of object colours according to the DIN99o formula
Химическая продукция ISO/TC 256
ISO/AWI 18319-2
Fibre reinforced polymer (FRP) reinforcement for concrete structures — Part 2: Specifications of CFRP strips
Здания и сооружения ISO/TC 71/SC 6
ISO/WD 18363-4
Animal and vegetable fats and oils — Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS — Part 4: Method using fast alkaline transesterification and measurement for 2-MCPD, 3-MCPD and glycidol
Еда и сельское хозяйств ISO/TC 34/SC 11
ISO/AWI 18473-4.2
Functional pigments and extenders for special applications — Part 4: Nanoscale titanium dioxide for photocatalytic application
Химическая продукция ISO/TC 256
ISO/WD 18626
Information and documentation — Interlibrary Loan Transactions
Информационные технологии, графика и фотография ISO/TC 46/SC 4
ISO/WD 18768-1
Organic coatings on aluminium and its alloys — Method for specifying decorative and protective organic coating on aluminium — Part 1: Powder coatings
Руды и металлы ISO/TC 79/SC 2
ISO/WD 18768-2
Organic coatings on aluminium and its alloys — Method for specifying decorative and protective organic coating on aluminium — Part 2: Liquid coatings
Руды и металлы ISO/TC 79/SC 2
ISO 19011:2018
Guidelines for auditing management systems
ISO/TMBG
ISO/DIS 19085-1
Woodworking machines — Safety — Part 1: Common requirements
Машиностроение ISO/TC 39/SC 4
ISO/WD TS 19124-1
Geographic information — Calibration and validation of remote sensing data and derived products — Part 1: Fundamentals
Информационные технологии, графика и фотография ISO/TC 211
ISO/CD TS 19159-4
Geographic information — Calibration and validation of remote sensing imagery sensors — Part 4: Space-borne passive microwave radiometers
Информационные технологии, графика и фотография ISO/TC 211
ISO 19160-1:2015
Addressing — Part 1: Conceptual model
Информационные технологии, графика и фотография ISO/TC 211
ISO 19160-3
Addressing — Part 3: Address data quality
Информационные технологии, графика и фотография ISO/TC 211
ISO/AWI 19160-6
Addressing — Part 6: Digital interchange models
Информационные технологии, графика и фотография ISO/TC 211
ISO 19220:2004
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Styrene copolymer blends (SAN + PVC)
Машиностроение ISO/TC 138/SC 1
ISO/AWI 19297-4
Intelligent transport systems — Shareable geospatial databases for ITS applications — Part 4: Common data structure
Транспорт ISO/TC 204
ISO/IEC 19395:2015
Information technology — Sustainability for and by information technology — Smart data centre resource monitoring and control
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 39
ISO/CD 19447
Passenger car tyres — Method for measuring ice grip performance — Loaded new tyres
Транспорт ISO/TC 31
ISO 19600:2014
Compliance management systems — Guidelines
Бизнес, менеджмент и инновации ISO/TC 309
ISO/AWI 19642-11
Road vehicles — Automotive cables — Part 11: Dimensions and requirements for coaxial RF cables with a specified analog bandwidth up to 6 GHz (20 GHZ)
Транспорт ISO/TC 22/SC 32
ISO/AWI 19642-12
Road vehicles — Automotive cables — Part 12: Unscreened paired or quad RF cables with a specified analog bandwidth up to 1 GHz
Транспорт ISO/TC 22/SC 32
ISO/WD 19650-4
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) — Information management using building information modelling — Part 4: Information exchange
Здания и сооружения ISO/TC 59/SC 13
ISO/WD 19659-3
Railway applications — Heating, ventilation and air conditioning systems for rolling stock — Part 3: Energy efficiency
Транспорт ISO/TC 269/SC 2
ISO/AWI 19665
Calibration of conditioning amplifiers for dynamic application
Машиностроение ISO/TC 108
ISO/IEC AWI 19777-5
Information technology — Computer graphics and image processing — Extensible 3D (X3D) language bindings — Part 5: C#
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 24
ISO/CD 19818-1
Eye and face protection - Protection against laser radiation — Part 1: Requirements and test methods
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 94/SC 6
ISO/DIS 19901-2
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria
Машиностроение ISO/TC 67/SC 7
ISO 19942:2018/DAmd 1
Maize (Zea mays L.) — Specification — Amendment 1: Feed maize - Specifications
Еда и сельское хозяйств ISO/TC 34/SC 10
ISO/AWI TS 20049-2
Solid biofuels — Determination of self-heating of pelletized biofuels — Part 2: Basket heating tests
Энергия ISO/TC 238
ISO 20121:2012
Event sustainability management systems — Requirements with guidance for use
ISO/TMBG
ISO/CD 20184-3
Molecular in vitro diagnostic examinations — Specifications for pre-examination processes for frozen tissue — Part 3: Isolated DNA
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 212
ISO 20419:2018
Treated wastewater reuse for irrigation — Guidelines for the adaptation of irrigation systems and practices to treated wastewater
Устойчивое развитие и окружающая среда ISO/TC 282/SC 1
ISO 20426:2018
Guidelines for health risk assessment and management for non-potable water reuse
Устойчивое развитие и окружающая среда ISO/TC 282/SC 3
ISO/WD TS 20432
Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
Здания и сооружения ISO/TC 221
ISO 20468-1:2018
Guidelines for performance evaluation of treatment technologies for water reuse systems — Part 1: General
Устойчивое развитие и окружающая среда ISO/TC 282/SC 3
ISO 20468-2:2019
Guidelines for performance evaluation of treatment technologies for water reuse systems — Part 2: Methodology to evaluate performance of treatment systems on the basis of greenhouse gas emissions
Устойчивое развитие и окружающая среда ISO/TC 282/SC 3
ISO/CD 20468-8
Guidelines for performance evaluation of treatment technologies for water reuse systems — Part 8: Evaluation of treatment systems based on Life Cycle Cost
Устойчивое развитие и окружающая среда ISO/TC 282/SC 3
ISO/DIS 20468-3
Guidelines for performance evaluation of treatment technologies for water reuse systems — Part 3: Ozone treatment technology
Устойчивое развитие и окружающая среда ISO/TC 282/SC 3
ISO/DIS 20468-4
Guidelines for performance evaluation of treatment technologies for water reuse systems — Part 4: UV Disinfection
Устойчивое развитие и окружающая среда ISO/TC 282/SC 3
ISO/DIS 20468-5
Guidelines for performance evaluation of treatment technologies for water reuse systems — Part 5: Membrane filtration
Устойчивое развитие и окружающая среда ISO/TC 282/SC 3
ISO/DIS 20468-6
Guidelines for performance evaluation of treatment technologies for water reuse systems — Part 6: Ion exchange and electrodialysis
Устойчивое развитие и окружающая среда ISO/TC 282/SC 3
ISO/DIS 20468-7
Guidelines for performance evaluation of treatment technologies for water reuse systems — Part 7: Advanced oxidation processes technology
Устойчивое развитие и окружающая среда ISO/TC 282/SC 3
ISO 20469:2018
Guidelines for water quality grade classification for water reuse
Устойчивое развитие и окружающая среда ISO/TC 282/SC 3
ISO/CD 20480-3
Fine bubble technology — General principles for usage and measurement of fine bubbles — Part 3: Terminology of fine bubble generating systems
Специальные технологии ISO/TC 281
ISO/TR 20529-1:2017
Intelligent transport systems — Framework for green ITS (G-ITS) standards — Part 1: General information and use case definitions
Транспорт ISO/TC 204
ISO/AWI 20560-2
Safety information for the content of piping systems and tanks — Part 2: Tanks
Горизонтальные предметы ISO/TC 145/SC 2
ISO 20670:2018
Water reuse — Vocabulary
Устойчивое развитие и окружающая среда ISO/TC 282
ISO/AWI 20670
Water reuse — Vocabulary
Устойчивое развитие и окружающая среда ISO/TC 282
ISO/AWI 20688-2
Biotechnology — Nucleic acid synthesis — Part 2: General definitions and requirements for the production and quality control of synthesized gene fragment, gene, and genome
Специальные технологии ISO/TC 276
ISO 20760-1:2018
Water reuse in urban areas — Guidelines for centralized water reuse system — Part 1: Design principle of a centralized water reuse system
Устойчивое развитие и окружающая среда ISO/TC 282/SC 2
ISO 20760-2:2017
Water reuse in urban areas — Guidelines for centralized water reuse system — Part 2: Management of a centralized water reuse system
Устойчивое развитие и окружающая среда ISO/TC 282/SC 2
ISO 20761:2018
Water reuse in urban areas — Guidelines for water reuse safety evaluation — Assessment parameters and methods
Устойчивое развитие и окружающая среда ISO/TC 282/SC 2
ISO/CD 20765-5
Natural gas — Calculation of thermodynamic properties — Part 5: Calculation of viscosity, Joule-Thomson coefficient, and isentropic exponent
Энергия ISO/TC 193/SC 1
ISO 20887
Sustainability in buildings and civil engineering works — Design for disassembly and adaptability — Principles, requirements and guidance
Здания и сооружения ISO/TC 59/SC 17
ISO/CD 20908
Tyre sound emission test — Methods of drum
Транспорт ISO/TC 31
ISO/AWI 20956
Low dose rate calibration of instruments for environmental and area monitoring
Энергия ISO/TC 85/SC 2
ISO 21138-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specifications and performance criteria for pipes, fittings and system
Машиностроение ISO/TC 138/SC 1
ISO 21138-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A
Машиностроение ISO/TC 138/SC 1
ISO 21138-3:2007
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B
Машиностроение ISO/TC 138/SC 1
ISO/CD 21234
Road vehicles — Heavy commercial vehicles and buses — Moment of inertia measurement
Транспорт ISO/TC 22/SC 33
ISO/CD 21256-3
Fine bubble technology — Cleaning applications — Part 3: Test method for cleaning hard flooring surfaces
Специальные технологии ISO/TC 281
ISO/PRF TS 21256-1
Fine bubble technology — Cleaning applications — Part 1: Test method for cleaning salt (NaCl)-stained surfaces
Специальные технологии ISO/TC 281
ISO/CD TS 21274
Light and lighting — Commissioning process of smart lighting systems in buildings
Энергия ISO/TC 274
ISO/WD TS 21328
Graphic Technology – Guidelines and Requirements for Multicolour (CMYKOGV) Print Characterisation
Информационные технологии, графика и фотография ISO/TC 130
ISO/CD 21448
Road vehicles — Safety of the intended functionality
Транспорт ISO/TC 22/SC 32
ISO/NP 21474-2
In vitro diagnostic medical devices — Multiplex molecular testing for nucleic acids — Part 2: Part 2 — Validation and Verification
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 212
ISO/WD TS 21512
Earned Value Management (EVM) in Project and Programme Management — Implementation Guide
Бизнес, менеджмент и инновации ISO/TC 258
ISO/DIS 21543
Milk and milk products — Guidelines for the application of near infrared spectrometry
Еда и сельское хозяйств ISO/TC 34/SC 5
ISO/AWI TR 21636
Identification and description of language varieties
Горизонтальные предметы ISO/TC 37/SC 2
ISO/CD 21646
Solid recovered fuels — Sample preparation
Энергия ISO/TC 300
ISO/WD 21725-1
Simplified design of prestressed concrete bridges — Part 1: I-girder bridges
Здания и сооружения ISO/TC 71/SC 5
ISO/WD 21725-2
Simplified design of prestressed concrete bridges — Part 2: Box-girder bridges
Здания и сооружения ISO/TC 71/SC 5
ISO/CD 21806-10
Road vehicles — Media Oriented Systems Transport (MOST) — Part 10: 150-Mbit/s coaxial physical layer
Транспорт ISO/TC 22/SC 31
ISO/CD 21806-11
Road vehicles — Media Oriented Systems Transport (MOST) — Part 11: 150-Mbit/s coaxial physical layer conformance test plan
Транспорт ISO/TC 22/SC 31
ISO/CD 21806-12
Road vehicles — Media Oriented Systems Transport (MOST) — Part 12: 50-Mbit/s balanced media physical layer
Транспорт ISO/TC 22/SC 31
ISO/CD 21806-13
Road vehicles — Media Oriented Systems Transport (MOST) — Part 13: 50-Mbit/s balanced media physical layer conformance test plan
Транспорт ISO/TC 22/SC 31
ISO/CD 21806-14
Road vehicles — Media Oriented Systems Transport (MOST) — Part 14: Lean application layer
Транспорт ISO/TC 22/SC 31
ISO/CD 21806-15
Road vehicles — Media Oriented Systems Transport (MOST) — Part 15: Lean application layer conformance test plan
Транспорт ISO/TC 22/SC 31
ISO/CD 21815-1
Earth-moving machinery — Collision warning and avoidance — Part 1: General requirements
Машиностроение ISO/TC 127/SC 2
ISO/CD TS 21815-2
Earth-moving machinery — Collision warning and avoidance — Part 2: Part 2: On-board J1939 communication interface
Машиностроение ISO/TC 127/SC 2
ISO/WD 21815-3
Earth-moving machinery — Collision warning and avoidance — Part 3: General risk area and risk level
Машиностроение ISO/TC 127/SC 2
ISO/IEC FDIS 21836
Information technology — Data centres — Server energy effectiveness metric
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 39
ISO/DIS 21902
Tourism and related services — Accessible tourism for all — Requirements and recommendations
Услуги ISO/TC 228
ISO/TS 21929-2:2015
Sustainability in building construction — Sustainability indicators — Part 2: Framework for the development of indicators for civil engineering works
Здания и сооружения ISO/TC 59/SC 17
ISO 21931-2:2019
Sustainability in buildings and civil engineering works — Framework for methods of assessment of the environmental, social and economic performance of construction works as a basis for sustainability assessment — Part 2: Civil engineering works
Здания и сооружения ISO/TC 59/SC 17
ISO/TR 21932:2013
Sustainability in buildings and civil engineering works — A review of terminology
Здания и сооружения ISO/TC 59/SC 17
ISO 21939-1:2019
A method to calculate and express energy consumption of industrial wastewater treatment for the purpose of water reuse — Part 1: Biological processes
Устойчивое развитие и окружающая среда ISO/TC 282/SC 4
ISO/AWI 22003-2
Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems — Part 2: Requirements for bodies providing audits of food safety management system elements in conjunction with safe food product/process certification
Еда и сельское хозяйств ISO/TC 34/SC 17
ISO/CD 22057
Enabling use of Environmental Product Declarations (EPD) at construction works level using building information modelling (BIM)
Здания и сооружения ISO/TC 59/SC 17
ISO/AWI 22085-3
Intelligent transport systems — Nomadic device service platform for micro mobility — Part 3: Data structure and data exchange procedures
Транспорт ISO/TC 204
ISO/WD 22102
Polyethylene (PE) materials for piping systems — Determination of the resistance to point loads — Test method
Машиностроение ISO/TC 138/SC 5
ISO/WD TS 22107
Dispersibility of solid particles into a liquid
Специальные технологии ISO/TC 24/SC 4
ISO/WD TS 22133-1
Road vehicles — Test object monitoring and control for active safety and automated/autonomous vehicle testing — Part 1: Functional requirements, specifications and communication protocol
Транспорт ISO/TC 22/SC 33
ISO/AWI 22135
Road vehicles- Heavy commercial vehicles and buses — Calculation for steady state roll-over threshold
Транспорт ISO/TC 22/SC 33
ISO/WD 22139
Heavy commercial vehicles and buses — Test method for steering effort measurement when manoeuvring at low speed or with stationary vehicle
Транспорт ISO/TC 22/SC 33
ISO/DIS 22172-2
Agricultural machinery and tractors — Repair and maintenance information — Part 2: Vehicle on-board diagnostics
Транспорт ISO/TC 23
ISO/AWI 22181
Aerospace fluid systems and components — Variable displacement hydraulic motors
Транспорт ISO/TC 20/SC 10
ISO/CD 22238
Water reuse — A guideline to wastewater disinfection and equivalent treatments
Устойчивое развитие и окружающая среда ISO/TC 282/SC 1
ISO/CD TS 22272
Health Informatics - Methodology for analysis of business and information needs of health enterprises to support standards based architectures
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 215
ISO 22301:2012
Societal security — Business continuity management systems — Requirements
Безопасность и риск ISO/TC 292
ISO 22319:2017
Security and resilience — Community resilience — Guidelines for planning the involvement of spontaneous volunteers
Безопасность и риск ISO/TC 292
ISO/AWI 22371
Security and resilience - Urban resilience - Framework, model and guidelines for strategy and implementation
Безопасность и риск ISO/TC 292
ISO/AWI 22379
Security and resilience — Guidelines for hosting and organizing large citywide events
Безопасность и риск ISO/TC 292
ISO 22447:2019
Industrial wastewater classification
Устойчивое развитие и окружающая среда ISO/TC 282/SC 4
ISO 22449-1:2020
Use of reclaimed water in industrial cooling systems — Part 1: Technical guidelines
Устойчивое развитие и окружающая среда ISO/TC 282/SC 4
ISO/FDIS 22449-2
Use of reclaimed water in industrial cooling systems — Part 2: Guidelines for cost analysis
Устойчивое развитие и окружающая среда ISO/TC 282/SC 4
ISO/WD 22476-16
Geotechnical investigation and testing — Field testing — Part 16: Borehole shear test
Здания и сооружения ISO/TC 182
ISO/CD 22496
Windows and pedestrian doors — Terminology
Здания и сооружения ISO/TC 162
ISO 22519:2019
Purified water and water for injection pretreatment and production systems
Устойчивое развитие и окружающая среда ISO/TC 282
ISO/AWI 22519
Purified water and water for injection pretreatment and production systems
Устойчивое развитие и окружающая среда ISO/TC 282
ISO/FDIS 22524
Pilot plan for industrial wastewater treatment facilities in the objective of reuse
Устойчивое развитие и окружающая среда ISO/TC 282/SC 4
ISO/AWI 22553-13
Paints and varnishes — Electro-deposition coatings — Part 13: Determination of re-solving behaviour
Химическая продукция ISO/TC 35/SC 9
ISO/AWI 22553-14
Paints and varnishes — Electro-deposition coatings — Part 14: Deposition behaviour
Химическая продукция ISO/TC 35/SC 9
ISO/WD 22685
Refractory products — Determination of compressive strength at elevated temperature
Химическая продукция ISO/TC 33
ISO/WD 22705-2
Springs — Measurement and test parameters — Part 2: Part 2: Cold formed cylindrical helical extension springs
Машиностроение ISO/TC 227
ISO/AWI TS 22726-2
Intelligent transport systems — Dynamic data and map database specification for connected and automated driving system applications — Part 2: Logical data model of dynamic data
Транспорт ISO/TC 204
ISO/WD 22760-3
Road vehicles — Dimethyl Ether (DME) fuel system components — Part 3: 85% stop valve
Транспорт ISO/TC 22/SC 41
ISO/WD 22760-4
Road vehicles — Dimethyl Ether (DME) fuel system components — Part 4: Level indicator
Транспорт ISO/TC 22/SC 41
ISO/WD 22760-6
Road vehicles — Dimethyl Ether (DME) fuel system components — Part 6: Pressure relief valve (PRV)
Транспорт ISO/TC 22/SC 41
ISO/WD 22760-9
Road vehicles — Dimethyl Ether (DME) fuel system components — Part 9: Pressure relief device (PRD)
Транспорт ISO/TC 22/SC 41
ISO/WD 22762-6
Elastomeric seismic-protection isolators — Part 6: Part 6: High-durability and high-performance specifications, and test methods
Неметаллические материалы ISO/TC 45/SC 4
ISO/AWI 22804
General technical requirement of marine conductivity-temperature-depth (CTD) measuring instruments
Транспорт ISO/TC 8/SC 13
ISO/WD 22915-25
Industrial trucks — Verification of stability — Part 25: Rough-terrain variable-reach trucks operating in the special condition of handling freely suspended loads
Транспорт ISO/TC 110/SC 4
ISO/IEC WD 22954
Automated office colour management
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 28
ISO/DIS 23043
Evaluation methods for industrial wastewater treatment reuse processes
Устойчивое развитие и окружающая среда ISO/TC 282/SC 4
ISO/DIS 23044
Guidelines for softening and desalination of industrial wastewater for reuse
Устойчивое развитие и окружающая среда ISO/TC 282/SC 4
ISO/DIS 23056
Water reuse in urban areas — Guidelines for decentralized/onsite water reuse system — Design principle of a decentralized/onsite system
Устойчивое развитие и окружающая среда ISO/TC 282/SC 2
ISO/DIS 23070
Water reuse in urban areas — Guidelines for reclaimed water treatment — Design principle of a RO desalination system of municipal wastewater
Устойчивое развитие и окружающая среда ISO/TC 282/SC 2
ISO/IEC DIS 23094-1
Information technology — General video coding — Part 1: Essential video coding
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 29
ISO/CD 23131
Ellipsometry — Principles
Руды и металлы ISO/TC 107
ISO/NP TS 23151
Nanotechnologies — Particle size distribution for cellulose nanocrystals
Специальные технологии ISO/TC 229
ISO/AWI TS 23157
Determination of silanol group content on the surface of fumed silica — Reaction gas chromatographic method
Химическая продукция ISO/TC 256
ISO/CD 23216
Carbon based films — Determination of optical property of amorphous carbon films by spectroscopic ellipsometry
Руды и металлы ISO/TC 107
ISO/WD TS 23357
Clinical genomics data sharing specification for next generation sequencing
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 215/SC 1
ISO/AWI 23374
Intelligent transport systems — Automated valet parking systems (AVPS) — System framework, communication interface, and vehicle operation
Транспорт ISO/TC 204
ISO/AWI 23375
Intelligent transport systems — Collision evasive lateral manoeuvre systems (CELM) — Performance requirements and test procedures
Транспорт ISO/TC 204
ISO/AWI 23376
Intelligent transport systems — Vehicle-to-vehicle intersection collision warning systems (VVICW) — Performance requirements and test procedures
Транспорт ISO/TC 204
ISO/CD 23472-3
Foundry machinery — Terminology — Part 3: Die casting machines and other equipment related to permanent mold casting process
Машиностроение ISO/TC 306
ISO/DIS 23472-2
Foundry machinery — Terminology — Part 2: Molding & coremaking machines and other equipment related to non-permanent mold casting process
Машиностроение ISO/TC 306
ISO/NP 23511
Biotechnology — General requirements for cell line authentication
Специальные технологии ISO/TC 276
ISO/DIS 23551-6
Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 6: Thermoelectric flame supervision controls
Машиностроение ISO/TC 161
ISO/CD TS 23624
Safe Use of High Performance — Fibre ropes in Crane applications
Здания и сооружения ISO/TC 96/SC 3
ISO/AWI TS 23650
Nanotechnologies — Evaluation of the antimicrobial performance of textiles containing manufactured nanomaterials
Специальные технологии ISO/TC 229
ISO/WD 23669
Corrosion of metals and alloys — Guidelines for corrosion and environmentally assisted cracking testing of additively manufactured metals and alloys
Руды и металлы ISO/TC 156
ISO/CD 23737
Fine Ceramics (advanced ceramics, advanced technical ceramics) — Wear test methods of fine ceramic thin films under dry and humid conditions
Неметаллические материалы ISO/TC 206
ISO/CD 23738
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of spectral reflectance of fine ceramics thin films under humid condition
Неметаллические материалы ISO/TC 206
ISO/AWI 23739
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of zirconium oxide powders
Неметаллические материалы ISO/TC 206
ISO/WD 23749
Microbeam analysis - Electron backscatter diffraction Quantitative - Determination of austenite in steel
Специальные технологии ISO/TC 202
ISO/IEC AWI 23763
Information technology — Computer graphics, image processing and environmental data representation — Display device interface for mixed and augmented reality
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 24
ISO/AWI 23779
Shot blasting machinery — safety and environmental requirements
Машиностроение ISO/TC 306
ISO/AWI 23799
Ships and marine technology — Assessment of onboard cyber safety
Транспорт ISO/TC 8
ISO/AWI 23802
Gas cylinders — Composite tubes permanently mounted in a frame — Periodic inspection and testing
Машиностроение ISO/TC 58/SC 4
ISO/AWI 23806
Ships and marine technology—Cyber safety
Транспорт ISO/TC 8
ISO/TS 23818-1
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 1: Polyethylene (PE) material
Машиностроение ISO/TC 138/SC 8
ISO/WD TS 23818-2
ISO/TS 23818-2 Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 2: Resin-fibre composite (RFC) material
Машиностроение ISO/TC 138/SC 8
ISO/AWI 23825
Method for evaluating the nodularity of spheroidal carbides — Steels for cold heading and cold extruding
Руды и металлы ISO/TC 17/SC 4
ISO/AWI 23835
Space Systems — Mechanism design and verification
Транспорт ISO/TC 20/SC 14
ISO/AWI 23838
Metallic Materials — High Strain Rate Torsion Test at Room Temperature
Руды и металлы ISO/TC 164/SC 2
ISO/DIS 23856
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
Машиностроение ISO/TC 138/SC 6
ISO/DIS 23864
Non‐destructive testing of welds — Ultrasonic testing — Use of (semi‐) automated full matrix capture / total focusing technique (FMC/TFM)
IIW
ISO/DIS 23865
Non-destructive testing — Ultrasonic testing — General use of full matrix capture / total focusing technique (FMC/TFM)
IIW
ISO/AWI 23869
Determination of Self-leveling Properties of Sealant
Здания и сооружения ISO/TC 59/SC 8
ISO/CD 23876
Gas cylinders — Cylinders and tubes of composite construction — Acoustic emission (AE) testing for periodic inspection and testing
Машиностроение ISO/TC 58/SC 4
ISO/AWI 23880
Sludge recovery, recycling, treatment and disposal — Vocabulary
Устойчивое развитие и окружающая среда ISO/TC 275
ISO/AWI 23885
Determination of the coating strength in the fold
Неметаллические материалы ISO/TC 6/SC 2
ISO/AWI 23886
Aerospace — Collar, threaded, self-locking — Test method for torque and preload
Транспорт ISO/TC 20/SC 4
ISO/AWI 23887
Aerospace — Blind fasteners, threaded type, self-locking — Test method for locking torque
Транспорт ISO/TC 20/SC 4
ISO/CD 23903
Health Informatics — Interoperability and Integration Reference Architecture
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 215
ISO/DIS 23904
Cigarettes — Determination of selected phenolic compounds in cigarette mainstream smoke with an intense smoking regime using HPLC-FLD
Еда и сельское хозяйств ISO/TC 126
ISO/DIS 23905
Cigarettes — Determination of selected phenolic compounds in cigarette mainstream smoke using HPLC-FLD
Еда и сельское хозяйств ISO/TC 126
ISO/AWI 23906-2
Cigarettes — Determination of benzo[a]pyrene in cigarette mainstream smoke with an intense smoking regime using GC/MS — Part 2: Method using cyclohexane as extraction solvent
Еда и сельское хозяйств ISO/TC 126
ISO/DIS 23906-1
Cigarettes — Determination of benzo[a]pyrene in cigarette mainstream smoke under intense smoking conditions using GC/MS — Part 1: Method using methanol as extraction solvent
Еда и сельское хозяйств ISO/TC 126
ISO/FDIS 23919
Cigarettes — Determination of ammonia in cigarette mainstream smoke using ion chromatography
Еда и сельское хозяйств ISO/TC 126
ISO/DIS 23920
Cigarettes — Determination of ammonia in cigarette mainstream smoke with an intense smoking regime using ion chromatography
Еда и сельское хозяйств ISO/TC 126
ISO/DIS 23921
Cigarettes — Determination of tobacco specific nitrosamines in mainstream cigarette smoke under intense smoking conditions — Method using LC-MS/MS
Еда и сельское хозяйств ISO/TC 126
ISO/DIS 23922
Cigarettes — Determination of selected carbonyls in the mainstream smoke of cigarettes under intense smoking conditions — Method using high performance liquid chromatography
Еда и сельское хозяйств ISO/TC 126
ISO/DIS 23923
Cigarettes — Determination of selected volatile organic compounds in the mainstream smoke of cigarettes under intense smoking conditions — Method using GC/MS
Еда и сельское хозяйств ISO/TC 126
ISO/NP 23924
Cigarettes — Determination of nitrogen oxides in the vapour phase of cigarette smoke with an intense smoking regime — Chemiluminescence method
Еда и сельское хозяйств ISO/TC 126
ISO/DIS 23952
Automation systems and integration — Quality information framework (QIF) — An integrated model of manufacturing quality information
Информационные технологии, графика и фотография ISO/TC 184/SC 4
ISO/DIS 23976
Plastics — Fast differential scanning calorimetry — Chip calorimetry
Неметаллические материалы ISO/TC 61/SC 5
ISO/DIS 23977-1
Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 1: Method by analysis of evolved carbon dioxide
Неметаллические материалы ISO/TC 61/SC 14
ISO/CD 23979
Ergonomics — Accessible design — Ease of operation
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 159/SC 3
ISO/AWI 23986
Tobacco heating systems- Determination of chemicals and components in the aerosol and consumables
Еда и сельское хозяйств ISO/TC 126
ISO/AWI 23991
Irrigation Applications of Ductile Iron Pipelines — Product Design and Installation
Машиностроение ISO/TC 5/SC 2
ISO/AWI 24016-1
Jewellery and precious metals — Grading Polished Diamonds — Part 1: Part 1: Terminology and classification
Специальные технологии ISO/TC 174
ISO/AWI 24016-2
Jewellery and precious metals — Grading Polished Diamonds — Part 2: Part 2: Test methods
Специальные технологии ISO/TC 174
ISO/PAS 24019:2020
Simultaneous interpreting delivery platforms — Requirements and recommendations
Горизонтальные предметы ISO/TC 37/SC 5
ISO/CD 24020
Corrosion of metals and alloys Standard test method for particle-free erosion corrosion of metallic materials by jet-in-slit
Руды и металлы ISO/TC 156
ISO/IEC AWI 24039
Information Technology - Smart city digital platform
Информационные технологии, графика и фотография ISO/IEC JTC 1
ISO/NP 24040
Textiles — Determination of certain benzotriazole compounds
Неметаллические материалы ISO/TC 38
ISO/DIS 24041
Ships and marine technology — Shark jaw and towing pins
Транспорт ISO/TC 8/SC 4
ISO/DIS 24042
Liquid cargo handling equipment — Crude oil offloading system —Tandem mooring winch
Транспорт ISO/TC 8/SC 4
ISO/DIS 24043
Marine structures — Crude oil offloading system — Hose reels
Транспорт ISO/TC 8/SC 4
ISO/DIS 24044
Ships and marine technology — Deck machinery — Multifunctional manipulator
Транспорт ISO/TC 8/SC 4
ISO/AWI 24045
Ships and marine technology —Adjustable roller-type chain stopper
Транспорт ISO/TC 8/SC 4
ISO/AWI 24046
Fine ceramics (advanced ceramics, advanced technical ceramics)－Ceramic composites－Methods of tests for reinforcements: Determination of the tensile properties of resin-impregnated yarn
Неметаллические материалы ISO/TC 206
ISO/WD 24057
Microtremor measurement to estimate shear wave velocity structure of the ground
Здания и сооружения ISO/TC 182
ISO/AWI 24059
Ships and marine technology — Anchor cable releaser
Транспорт ISO/TC 8/SC 4
ISO/AWI 24060
Software maintenance of shipboard equipment
Транспорт ISO/TC 8/SC 11
ISO/AWI 24061
Ships and marine technology — High holding power balance anchor
Транспорт ISO/TC 8/SC 4
ISO/AWI TS 24064
Document management — Portable Document Format — 3D data streams conforming to the ISO 10303:242 (STEP AP242) specification
Информационные технологии, графика и фотография ISO/TC 171/SC 2
ISO/AWI 24068-1
Building and civil engineering works — Determination of the rate of cure of sealants — Part 1: Build-up of tensile properties in dumbbell-shaped specimens
Здания и сооружения ISO/TC 59/SC 8
ISO/AWI 24068-2
Building and civil engineering works — Determination of the rate of cure of sealants — Part 2: Build-up of tensile and adhesion properties in test joint specimens
Здания и сооружения ISO/TC 59/SC 8
ISO/AWI 24070-2
Building and civil engineering works — Determination of depth of cure of one-component sealants — Part 2: Cylindrical cup test
Здания и сооружения ISO/TC 59/SC 8
ISO/WD 24070-1
Building and civil engineering works — Determination of depth of cure of one-component sealants — Part 1: Wedge-groove test
Здания и сооружения ISO/TC 59/SC 8
ISO/AWI TS 24082
Design of excellent services and outstanding customer experiences
Услуги ISO/TC 312
ISO/CD 24083
Information and documentation — International archives statistics
Информационные технологии, графика и фотография ISO/TC 46/SC 8
ISO/CD 24085-1
Implants for Surgery — Partial and total shoulder joint prosthesis — Part 1: Determination of resistance to static load of ceramic humeral heads and glenospheres
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 150/SC 4
ISO/CD 24085-2
Implants for Surgery — Partial and total shoulder joint prosthesis — Part 2: Determination of resistance to torque off head fixation of modular humeral prostheses
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 150/SC 4
ISO/AWI 24088-1
Biotechnology — Biobanking — Requirements for the collection, processing, storage and transportation of microorganisms — Part 1: Bacteria and archaea
Специальные технологии ISO/TC 276
ISO/AWI 24089
Road vehicles — Software update engineering
Транспорт ISO/TC 22/SC 32
ISO/AWI 24096
Technical product documentation — Classification of requirements on manufacturing documentation
Горизонтальные предметы ISO/TC 10/SC 6
ISO/WD 24131
Internal protection by polymeric lining for ductile iron pipes
Машиностроение ISO/TC 5/SC 2
ISO/AWI 24132
Ships and marine technology — Design and testing of marine transfer arms for liquefied hydrogen
Транспорт ISO/TC 8/SC 2
ISO/CD 24136
Ships and marine technology - Pilot ladder winch reel
Транспорт ISO/TC 8/SC 1
ISO/AWI 24139-1
Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 1: Clad bends
Машиностроение ISO/TC 67/SC 2
ISO/AWI 24139-2
Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 2: Clad fittings
Машиностроение ISO/TC 67/SC 2
ISO/AWI 24142
Safety requirements for dry and semi-dry single feed machine, processing systems and complete production line
Машиностроение ISO/TC 293
ISO/AWI 24146-1
Ships and marine technology — Marine environment protection — Part 1: Management and handling of shipboard waste on inland vessels
Транспорт ISO/TC 8/SC 2
ISO/AWI 24146-2
Ships and marine technology — Marine environment protection — Part 2: Specifications of port reception facilities of shipboard waste from inland navigation vessels
Транспорт ISO/TC 8/SC 2
ISO/AWI 24158-1
Safety of packaging machinery — Part 1: General requirements
Перевозка грузов, упаковка и транспортировка ISO/TC 313
ISO/AWI 24159
Safety requirements for manually-loading waste collection and transport vehicles
Устойчивое развитие и окружающая среда ISO/TC 297
ISO/AWI 24160
Technical standard for odor and wastewater control of waste collection and transport vehicles
Устойчивое развитие и окружающая среда ISO/TC 297
ISO/AWI 24161
Terminology for waste collection and transportation management
Устойчивое развитие и окружающая среда ISO/TC 297
ISO/CD 24165
Reference data for financial services — Digital token identifier — Registration, assignment and structure
Услуги ISO/TC 68/SC 8
ISO/AWI 24169
Ships and marine technology — Fireproof watertight hatch covers
Транспорт ISO/TC 8/SC 8
ISO/AWI 24177
Petroleum, petrochemical and natural gas industries. Internal coatings for corrosion protection of steel pipes, bends and fittings used in pipeline transportation systems
Машиностроение ISO/TC 67/SC 2
ISO/NP 24180
Textiles—Synthetic fibers—Determination of electrical resistance of filament yarns
Неметаллические материалы ISO/TC 38/SC 23
ISO/AWI 24183
Technical Communication — Vocabulary
Горизонтальные предметы ISO/TC 37
ISO/AWI 24185
The evaluation of the uncertainty of measurements from an autocorrelated process
Горизонтальные предметы ISO/TC 69/SC 6
ISO/WD 24187
Principles for the development of standards for investigation procedures of plastics in environmental media and materials
Неметаллические материалы ISO/TC 61/SC 14
ISO/AWI 24190
Biotechnology — Analytical Methods — Risk based approach for design and validation of methods for rapid microbial detection in bioprocesses
Специальные технологии ISO/TC 276
ISO/IEC PDTS 24192-1
Cards and security devices for personal identification — Communication between contactless readers and fare media used in public transport — Part 1: Implementation requirements for ISO/IEC 14443
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 17
ISO/IEC PDTS 24192-2
Cards and security devices for personal identification — Communication between contactless readers and fare media used in public transport — Part 2: Test plan for ISO/IEC 14443
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 17
ISO/AWI 24195
Road vehicles — Vocabulary for engineering of starting devices and electrical generators
Транспорт ISO/TC 22/SC 32
ISO/AWI 24196
Lignins — Determination of lignin content in kraft and biorefinery lignin
Неметаллические материалы ISO/TC 6
ISO/WD 24197
Vapour products — Analytical method to measure mass of e-liquids vaporized
Еда и сельское хозяйств ISO/TC 126/SC 3
ISO/AWI 24198
Vapour products — Analytical method to measure metals of e-vapor product emissions
Еда и сельское хозяйств ISO/TC 126/SC 3
ISO/AWI 24199
Vapour products — Analytical method to measure nicotine of e-vapor product emissions
Еда и сельское хозяйств ISO/TC 126/SC 3
ISO/AWI 24211
Vapour products — Analytical method to measure carbonyls of e-vapor product emissions
Еда и сельское хозяйств ISO/TC 126/SC 3
ISO/AWI 24212
Remediation techniques applied at contaminated sites
Устойчивое развитие и окружающая среда ISO/TC 190/SC 7
ISO/AWI 24215
Lignins — Determination of carbohydrate composition in kraft and biorefinery lignin
Неметаллические материалы ISO/TC 6
ISO/DIS 24220
Paocai (salted fermented vegetables) — Specification and test methods
Еда и сельское хозяйств ISO/TC 34/SC 3
ISO/AWI 24221
Railway Applications — Braking System — General Requirements
Транспорт ISO/TC 269/SC 2
ISO/AWI 24224
Ships and marine technology — Tanker cargo manifold shore connection — Technical requirements
Транспорт ISO/TC 8/SC 3
ISO/WD 24225
Ships and marine technology — Marine pneumatic quick-closing devices
Транспорт ISO/TC 8/SC 3
ISO/AWI 24229
Information and documentation — Codes for script conversion systems
Информационные технологии, графика и фотография ISO/TC 46
ISO/AWI 24239
General Requirements for Fossil Fuel Power Plants Corrosion Control Engineering Life Cycle
Руды и металлы ISO/TC 156/SC 1
ISO/AWI 24246
Space systems — Requirements for Global Navigation Satellite System (GNSS) positioning augmentation centers
Транспорт ISO/TC 20/SC 14
ISO/WD 24247
Ships and marine technology — Marine environment protection — Arrangement and management of port reception facilities in the arctic
Транспорт ISO/TC 8/SC 2
ISO/WD 24248
Ships and marine technology — Marine environment protection — Management and handling of waste generated on board Arctic ships
Транспорт ISO/TC 8/SC 2
ISO/WD 24259
Steel Strapping for Packaging
Перевозка грузов, упаковка и транспортировка ISO/TC 122
ISO/AWI 24260
Thermal insulation products——Hemp fiber mat and board——Specification
Здания и сооружения ISO/TC 163/SC 3
ISO/DIS 24261-1
Fine bubble technology — Elimination method for sample characterization — Part 1: Evaluation procedure
Специальные технологии ISO/TC 281
ISO/DIS 24263
Footwear — Attachments strength of straps, trims and accesories
Неметаллические материалы ISO/TC 216
ISO/DIS 24264
Footwear — Attachment strength of top pieces
Неметаллические материалы ISO/TC 216
ISO/DIS 24265
Footwear — Test methods for uppers — Fastness to rubbing using a rubber pad
Неметаллические материалы ISO/TC 216
ISO/DIS 24266
Footwear — Test methods for whole shoe — Flexing durability
Неметаллические материалы ISO/TC 216
ISO/DIS 24267
Friction — Test methods for casual footwear and components
Неметаллические материалы ISO/TC 216
ISO/AWI 24281
Textiles — Biaxial tensile properties of woven fabric — Determination of maximum force and elongation at maximum force using the grab method
Неметаллические материалы ISO/TC 38/SC 24
ISO/CD 24283-1
Geotechnical investigation and testing — Qualification criteria and assessment — Part 1: Qualified technician
Здания и сооружения ISO/TC 182
ISO/CD 24283-2
Geotechnical investigation and testing — Qualification criteria and assessment — Part 2: Responsible expert
Здания и сооружения ISO/TC 182
ISO/CD 24283-3
Geotechnical investigation and testing — Qualification criteria and assessment — Part 3: Qualified enterprise
Здания и сооружения ISO/TC 182
ISO/WD 24285
Thermal insulation for building equipment and industrial applications — Cellular Glass products — Specification
Здания и сооружения ISO/TC 163/SC 3
ISO/IEC AWI 24286
Information technology — Continual Performance Improvement — Concepts and Terminology
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 40
ISO/AWI 24316
Ships and marine technology — Design and testing specification for steel doors using electrical resistance trace heating
Транспорт ISO/TC 8/SC 8
ISO/AWI 24319
Ships and marine technology — Design and test requirements for electrical trace heating small steel hatches
Транспорт ISO/TC 8/SC 8
ISO/AWI 24322
Timber structures — Methods of test for evaluation of long-term performance — Part 1: wood-based products in bending
Здания и сооружения ISO/TC 165
ISO/CD 24323
Design methods for vibrational serviceability of timber floors
Здания и сооружения ISO/TC 165
ISO/WD 24329
Low-protein natural rubber concentrate — Specification
Неметаллические материалы ISO/TC 45/SC 3
ISO/AWI 24330
Space systems — Rendezvous and Proximity Operations (RPO) and On Orbit Servicing (OOS) — Programmatic principles and practices
Транспорт ISO/TC 20/SC 14
ISO/WD 24352
Technical requirements for light and small unmanned aircraft electric energy system
Транспорт ISO/TC 20/SC 16
ISO 24353:2008/CD Amd 1
Hygrothermal performance of building materials and products — Determination of moisture adsorption/desorption properties in response to humidity variation — Amendment 1
Здания и сооружения ISO/TC 163/SC 1
ISO/WD 24354
General requirements for civil small and light UAS payload interface
Транспорт ISO/TC 20/SC 16
ISO/WD 24356
General requirements for tethered unmanned aircraft system
Транспорт ISO/TC 20/SC 16
ISO/IEC AWI 24357
Face image quality assessment
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 37
ISO/IEC AWI 24358
Face-aware capture subsystem specifications
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 37
ISO/WD 24360
Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Determination of the cross tension strength
Неметаллические материалы ISO/TC 61/SC 13
ISO/AWI 24367
Non-destructive testing — Acoustic emission testing —Metallic pressure equipment
Специальные технологии ISO/TC 135/SC 9
ISO/AWI 24376
Rubber, raw natural - Guidelines for technically specified low-protein natural rubber
Неметаллические материалы ISO/TC 45/SC 3
ISO/WD 24378
Feed machinery terminology
Машиностроение ISO/TC 293
ISO/IEC WD 24391
Information technology — Security techniques — Guidelines for IoT-domotics security and privacy
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 27
ISO/IEC WD 24392
Information technology — Security techniques —Security reference model for Industrial Internet Platform (IIP)
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 27
ISO/WD TS 24399
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using time of flight diffraction testing
Машиностроение ISO/TC 138/SC 5
ISO/WD 24411
Space systems — Micro-vibration testing
Транспорт ISO/TC 20/SC 14
ISO/WD 24412
Space systems — Thermal vacuum environmental testing
Транспорт ISO/TC 20/SC 14
ISO/WD 24417
Surface chemical analysis — Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
Химическая продукция ISO/TC 201/SC 8
ISO/WD 24418
Microbeam analysis — A Guideline for Long Period Analysis Using SEM-EDS
Специальные технологии ISO/TC 202/SC 4
ISO/WD 24437
Superabrasive — Test method of impact toughness index
Машиностроение ISO/TC 29/SC 5
ISO/AWI 24448
Fine ceramics (advanced ceramics, advanced technical ceramics) — LED light source for testing semiconducting photocatalytic materials used under indoor lighting environment
Неметаллические материалы ISO/TC 206
ISO/WD 24449
Metallic and other inorganic coatings- Determination of thermal conductivity of thermal barrier coatings at elevated temperature
Руды и металлы ISO/TC 107
ISO/WD 24452
Ships and marine technology — Personal and group survival kit for use in polar water
Транспорт ISO/TC 8/SC 1
ISO/IEC WD 24458
Information technology -Automatic identification and data capture techniques-Bar code printer and bar code reader performance testing
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 31
ISO/WD 24460
Measurement of fluid flow rate in closed conduits — Radioactive Tracer Methods
Специальные технологии ISO/TC 30/SC 5
ISO/AWI 24461
Textiles—Anti-mosquito performance test method— Contact repellency test method using the attractive blood-feeding apparatus
Неметаллические материалы ISO/TC 38
ISO/IEC WD TS 24462
Ontology for ICT Trustworthiness Assessment
Информационные технологии, графика и фотография ISO/IEC JTC 1
ISO/WD 24465
Protocol for data acquisition and determination of the minimum detectability of Surface Plasmon Resonance device
Химическая продукция ISO/TC 201
ISO/AWI 24477
Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges
Специальные технологии ISO/TC 112
ISO/CD 24478
Railway applications — Braking — Generic vocabulary
Транспорт ISO/TC 269/SC 2
ISO/WD 24483
Epoxidised natural rubber — Specifications
Неметаллические материалы ISO/TC 45/SC 3
ISO/WD 24487-1
Graphic technology — Processless plates — Part 1: Part 1: Evaluation methods for characteristics and performance
Информационные технологии, графика и фотография ISO/TC 130
ISO/WD 24489
Non-destructive testing — Acoustic emission testing — Corrosion of atmospheric pressure metallic storage tank floor
Специальные технологии ISO/TC 135/SC 9
ISO/WD 24491
Railway applications — Passenger seats for heavy rail rolling stock
Транспорт ISO/TC 269/SC 2
ISO 24511:2007
Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of wastewater services
Услуги ISO/TC 224
ISO 24512:2007
Activities relating to drinking water and wastewater services — Guidelines for the management of drinking water utilities and for the assessment of drinking water services
Услуги ISO/TC 224
ISO 24518:2015
Activities relating to drinking water and wastewater services — Crisis management of water utilities
Услуги ISO/TC 224
ISO/AWI 24543
Non-destructive testing - Acoustic emission testing - Verification of the receiving sensitivity sprectrum of a piezoelectric acoustic emission sensor
Специальные технологии ISO/TC 135/SC 9
ISO/WD 24561
Sharing Economy — Terminology and Principles
Бизнес, менеджмент и инновации ISO/TC 324
ISO/WD 24564
Space systems — Adhesives — General requirements
Транспорт ISO/TC 20/SC 14
ISO/WD PAS 24565
Petroleum and natural gas industries — Ceramic lined tubing
Машиностроение ISO/TC 67/SC 5
ISO/WD 24580-1
Railway applications — Derailment detection systems — Part 1: Generic vocabulary
Транспорт ISO/TC 269/SC 2
ISO/WD 24585
Multispectral measurement and colorimetric computation for graphic arts and industrial applications
Информационные технологии, графика и фотография ISO/TC 130
ISO/WD 24613-5
Language resource management — Lexical markup framework (LMF) — Part 5: LBX serialisation
Горизонтальные предметы ISO/TC 37/SC 4
ISO/WD 24617-12
Language resource management — Semantic annotation framework (SemAF) — Part 12: Quantification
Горизонтальные предметы ISO/TC 37/SC 4
ISO/CD 24620-3
Language resource management — Controlled human communication (CHC) — Part 3: Part 3: Basic principles and methodology for controlled oral communication (COralCom)
Горизонтальные предметы ISO/TC 37/SC 4
ISO/WD 24627-2
Language resource management — Comprehensive Annotation Framework (ComAF) — Part 2: Knowledge representation of surface structures associated with linguistic content using graph structures
Горизонтальные предметы ISO/TC 37/SC 4
ISO/WD 24639
Microbeam analysis - Analytical electron microscopy - Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
Специальные технологии ISO/TC 202/SC 3
ISO/IEC CD 24641
Systems and Software engineering — Methods and tools for model-based systems and software engineering
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 7
ISO/WD 24642
Recreational diving services — Requirements for rebreather diver training — Decompression diving to 45 m
Услуги ISO/TC 228
ISO/AWI 24644
Mass customization value chain management
Информационные технологии, графика и фотография ISO/TC 184/SC 5
ISO/WD 24650
Road Vehicles — Sensors for automated driving under adverse weather conditions — Assessment of the cleaning system
Транспорт ISO/TC 22/SC 35
ISO/AWI 24651
Biotechnology — Biobanking — Requirements for human mesenchymal stromal cells derived from bone marrow
Специальные технологии ISO/TC 276
ISO/WD 24652
Spherical plain bearings — Spherical plain bearings rod ends for hydraulic fluid powercylinders
Машиностроение ISO/TC 4/SC 7
ISO/WD TS 24654
Document management — Portable Document Format — Non-Rectangular Links
Информационные технологии, графика и фотография ISO/TC 171/SC 2
ISO/WD 24656
Cathodic Protection of offshore wind structures
Руды и металлы ISO/TC 156
ISO/WD 24658-1
Cranes—Principles of safety management for wind by users — Part 1: General
Здания и сооружения ISO/TC 96/SC 5
ISO/IEC WD 24661
Information technology — User interfaces — Full duplex speech interaction user interfaces
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 35
ISO/IEC AWI 24668
Information technology — Artificial intelligence —Process management framework for Big data analytics
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 42
ISO/WD 24675
Railway Applications — Running time calculation for timetabling — Requirements
Транспорт ISO/TC 269/SC 3
ISO/WD 24684-1
Aggregates for concrete — Test methods for chemical properties — Part 1: Determination of acid soluble chloride salts
Здания и сооружения ISO/TC 71/SC 1
ISO/IEC CD 25010-1
Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — System and software quality models — Part 1: Quality models overview and usage
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 7
ISO/IEC CD 25010-2
Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — System and software quality models — Part 2: Product quality model
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 7
ISO/IEC CD 25010-3
Systems and software engineering － Systems and software Quality Requirements and Evaluation (SQuaRE) — Part 3: Quality in use
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 7
ISO/CD 25178-700
Geometrical product specifications (GPS) — Surface texture: Areal — Part 700: Calibration, adjustment and verification of areal topography measuring instruments
Информационные технологии, графика и фотография ISO/TC 213
ISO 26000:2010
Guidance on social responsibility
ISO/TMBG
ISO/IEC WD 27046
Information technology — Big data security and privacy — Implementation guidelines
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 27
ISO 28000:2007
Specification for security management systems for the supply chain
Безопасность и риск ISO/TC 292
ISO 28001:2007
Security management systems for the supply chain — Best practices for implementing supply chain security, assessments and plans — Requirements and guidance
Безопасность и риск ISO/TC 292
ISO 28002:2011
Security management systems for the supply chain — Development of resilience in the supply chain — Requirements with guidance for use
Безопасность и риск ISO/TC 292
ISO 28003:2007
Security management systems for the supply chain — Requirements for bodies providing audit and certification of supply chain security management systems
Безопасность и риск ISO/TC 292
ISO 28004-1:2007
Security management systems for the supply chain — Guidelines for the implementation of ISO 28000 — Part 1: General principles
Безопасность и риск ISO/TC 292
ISO/AWI 28921-1
Industrial valves — Isolating valves for low-temperature applications — Part 1: Design, manufacturing and production testing
Машиностроение ISO/TC 153
ISO/AWI 29461-7
Air filter intake systems for rotary machinery — Test methods — Part 7: Filter element endurance test in fog and mist environments
Машиностроение ISO/TC 142
ISO/AWI 29469
Thermal insulating products for building applications — Determination of compression behaviour
Здания и сооружения ISO/TC 163/SC 1
ISO/IEC AWI 30105-8
Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 8: Continual Performance Improvement (CPI) of ITES-BPO
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 40
ISO/IEC 30134-1:2016
Information technology — Data centres — Key performance indicators — Part 1: Overview and general requirements
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 39
ISO/IEC 30134-2:2016
Information technology — Data centres — Key performance indicators — Part 2: Power usage effectiveness (PUE)
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 39
ISO/IEC 30134-3:2016
Information technology — Data centres — Key performance indicators — Part 3: Renewable energy factor (REF)
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 39
ISO/IEC 30134-4:2017
Information technology — Data centres — Key performance indicators — Part 4: IT Equipment Energy Efficiency for servers (ITEEsv)
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 39
ISO/IEC 30134-5:2017
Information technology — Data centres — Key performance indicators — Part 5: IT Equipment Utilization for servers (ITEUsv)
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 39
ISO/CD TS 30423
Human resource management — Compliance and ethics metrics cluster
Бизнес, менеджмент и инновации ISO/TC 260
ISO/NP 30424
Knowledge management — Vocabulary
Бизнес, менеджмент и инновации ISO/TC 260
ISO/NP TS 30425
Human resource management — Workforce availability metrics
Бизнес, менеджмент и инновации ISO/TC 260
ISO/AWI 30426
Compensation System
Бизнес, менеджмент и инновации ISO/TC 260
ISO 30500:2018
Non-sewered sanitation systems — Prefabricated integrated treatment units — General safety and performance requirements for design and testing
ISO/TMBG
ISO 31000:2018
Risk management — Guidelines
Безопасность и риск ISO/TC 262
ISO/PRF TS 31657-1
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 1: Calculation of multi-lobed and tilting pad journal bearings
Машиностроение ISO/TC 123/SC 8
ISO/PRF TS 31657-2
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 2: Functions for calculation of multi-lobed journal bearings
Машиностроение ISO/TC 123/SC 8
ISO/PRF TS 31657-3
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 3: Functions for calculation of tilting pad journal bearings
Машиностроение ISO/TC 123/SC 8
ISO/PRF TS 31657-4
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 4: Permissible operational parameters for calculation of multi-lobed and tilting pad journal bearings
Машиностроение ISO/TC 123/SC 8
ISO/WD 32210
Framework for sustainable finance: Principles and guidance
Устойчивое развитие и окружающая среда ISO/TC 322
ISO/IEC PDTS 33054
Information technology — Process assessment — Process Reference Model (PRM) for service management
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 7
ISO/IEC PDTS 33074
Information technology — Process asessment — Process Capability Assessment Model (PAM) for service management
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 7
ISO/AWI 34000
Date and time — Concepts and vocabulary
Информационные технологии, графика и фотография ISO/TC 154
ISO/WD 34501
Road vehicles — Terms and definitions of test scenarios for automated driving systems
Транспорт ISO/TC 22/SC 33
ISO/WD 34502
Road vehicles — Engineering framework and process of scenario-based safety evaluation
Транспорт ISO/TC 22/SC 33
ISO/WD 34503
Road vehicles — Taxonomy for operational design domain for automated driving systems
Транспорт ISO/TC 22/SC 33
ISO/WD 34504
Road vehicles — Scenario attributes and categorization
Транспорт ISO/TC 22/SC 33
ISO/AWI 36100
Standardization documents — Document metamodel
Информационные технологии, графика и фотография ISO/TC 154
ISO 37101:2016
Sustainable development in communities — Management system for sustainable development — Requirements with guidance for use
Устойчивое развитие и окружающая среда ISO/TC 268
ISO/AWI 37108
Sustainable cities and communities — Business districts — Guidance for practical local implementation of ISO 37101
Устойчивое развитие и окружающая среда ISO/TC 268
ISO/CD 37164
Smart community infrastructures — Smart transportation using fuel cell LRT
Устойчивое развитие и окружающая среда ISO/TC 268/SC 1
ISO/DIS 37165
Smart community infrastructures — Guidance on smart transportation by non-cash payment for fare/fees in transportation and its related or additional services
Устойчивое развитие и окружающая среда ISO/TC 268/SC 1
ISO/AWI 37166
Smart community infrastructures —Specification of multi-source urban data integration for smart city planning(SCP)
Устойчивое развитие и окружающая среда ISO/TC 268/SC 1
ISO/AWI 37167
Smart community infrastructures — Smart transportation for energy saving by intentionally slowly driving
Устойчивое развитие и окружающая среда ISO/TC 268/SC 1
ISO/WD 37168
Smart community infrastructures — Guidance on smart transportation for autonomous shuttle services using Connected Autonomous electric Vehicles (eCAVs)
Устойчивое развитие и окружающая среда ISO/TC 268/SC 1
ISO/WD 37169
Smart community infrastructures — Smart transportation by run-through train/bus operation in/between cities
Устойчивое развитие и окружающая среда ISO/TC 268/SC 1
ISO/WD 37170
Smart community infrastructures — Data framework of infrastructure governance base on digital technology
Устойчивое развитие и окружающая среда ISO/TC 268/SC 1
ISO/IEC WD 39075
Information Technology — Database Languages — GQL
Информационные технологии, графика и фотография ISO/IEC JTC 1/SC 32
ISO/NP 44004
Collaborative business relationship management — Guidance for large organisations seeking to engage MSME within their Collaborative relationship programmes
Бизнес, менеджмент и инновации ISO/TC 286
ISO 45001:2018
Occupational health and safety management systems — Requirements with guidance for use
Безопасность и риск ISO/TC 283
ISO/AWI 50010
Energy management and energy savings - Guidance for zero net energy in operations
Энергия ISO/TC 301
ISO/WD 52016-5
Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 5: Specific criteria and validation procedures
Здания и сооружения ISO/TC 163/SC 2
ISO/TS 54001:2019
Quality management systems — Particular requirements for the application of ISO 9001:2015 for electoral organizations at all levels of government
Бизнес, менеджмент и инновации ISO/TC 176
ISO 55000:2014
Asset management — Overview, principles and terminology
Бизнес, менеджмент и инновации ISO/TC 251
ISO 55001:2014
Asset management — Management systems — Requirements
Бизнес, менеджмент и инновации ISO/TC 251
ISO 55002:2014
Asset management — Management systems — Guidelines for the application of ISO 55001
Бизнес, менеджмент и инновации ISO/TC 251
ISO 55002:2018
Asset management — Management systems — Guidelines for the application of ISO 55001
Бизнес, менеджмент и инновации ISO/TC 251
ISO/TS 55010:2019
Asset management — Guidance on the alignment of financial and non-financial functions in asset management
Бизнес, менеджмент и инновации ISO/TC 251
ISO/CD 55011
Guidance on the development of government asset management policy
Бизнес, менеджмент и инновации ISO/TC 251
ISO/AWI 56008
Innovation management — tools and methods for innovation operation measurements — Guidance
Бизнес, менеджмент и инновации ISO/TC 279
IEC/DIS 62959
Environmental conscious design (ECD) — Principles, requirements and guidance
Устойчивое развитие и окружающая среда ISO/TC 207
ISO/AWI TS 82304-2
Health software — Part 2: Health and wellness apps—Quality criteria across the life cycle—Code of Practice
Здоровье, медицина и оборудование, применяющееся в лабораториях ISO/TC 215