Sewage water disposal and treatment, смотри 13.060.30
Drainage systems for rainwater, смотри 91.060.20
External sewage systems, смотри 93.030
  • Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO 265-1:1988
Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series — Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
90.93 ISO/TC 138/SC 1
ISO/R 265:1962
Pipes and fittings of plastics materials — Socket fittings with spigot ends for domestic and industrial waste pipes — Basic dimensions : Metric series
95.99 ISO/TC 138
ISO 391:1982
Building and sanitary pipes in asbestos-cement
95.99 ISO/TC 77
ISO 392:1986
Asbestos-cement pipe fittings for building and sanitary purposes
95.99 ISO/TC 77
ISO/R 392:1964
Asbestos-cement pipe fittings for building and sanitary purposes
95.99 ISO/TC 77
ISO 559:1977
Welded or seamless steel tubes for water, sewage and gas
95.99 ISO/TC 5
ISO 559:1991
Steel tubes for water and sewage
95.99 ISO/TC 5/SC 1
ISO 881:1980
Asbestos-cement pipes, joints and fittings for sewerage and drainage
95.99 ISO/TC 77
ISO 3633:1991
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
ISO 3633:2002
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Unplasticized poly(vinyl chloride) (PVC-U)
90.93 ISO/TC 138/SC 1
ISO 4633:1983
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:1996
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:2002
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:2015
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
60.60 ISO/TC 45/SC 4
ISO 6594:1983
Cast iron drainage pipes and fittings — Spigot series
95.99 ISO/TC 5/SC 2
ISO 6594:2006
Cast iron drainage pipes and fittings — Spigot series
90.93 ISO/TC 5/SC 2
ISO/NP TR 7024
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Thermoplastics — Recommended practice for installation
10.99 ISO/TC 138/SC 1
ISO/TR 7024:1985
Above-ground drainage — Recommended practice and techniques for the installation of unplasticized polyvinyl chloride (PVC-U) sanitary pipework for above-ground systems inside buildings
95.99 ISO/TC 138/SC 1
ISO/TS 7024:2005
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Thermoplastics — Recommended practice for installation
90.92 ISO/TC 138/SC 1
ISO/TR 7073:1988
Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers
95.99 ISO/TC 138/SC 1
ISO/TR 7074:1986
Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
95.99 ISO/TC 138/SC 1
ISO 7186:1983
Ductile iron pipes and accessories for non-pressure pipe-lines
95.99 ISO/TC 5/SC 2
ISO 7671:1991
Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
ISO 7671:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polypropylene (PP)
90.60 ISO/TC 138/SC 1
ISO 7675:1991
Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
ISO 7675:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Chlorinated poly(vinyl chloride) (PVC-C)
90.93 ISO/TC 138/SC 1
ISO 7682:1991
Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
ISO 7682:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene (ABS)
90.60 ISO/TC 138/SC 1
ISO 8283-1:1991
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
90.93 ISO/TC 138/SC 1
ISO 8283-2:1992
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE)
90.60 ISO/TC 138/SC 1
ISO 8283-3:1992
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)
90.20 ISO/TC 138/SC 1
ISO 8283-4:1992
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)
90.60 ISO/TC 138/SC 1
ISO 8770:1991
High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
ISO 8770:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polyethylene (PE)
90.60 ISO/TC 138/SC 1
ISO 8772:1991
High-density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems — Specifications
95.99 ISO/TC 138/SC 1
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
90.93 ISO/TC 138/SC 1
ISO 8773:1991
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems — Specifications
95.99 ISO/TC 138/SC 1
ISO 8773:2006
Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP)
90.93 ISO/TC 138/SC 1
ISO 9896:1996
Plastics traps for discharge pipework systems inside buildings
90.93 ISO/TC 138/SC 1
ISO 10467:2004
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
95.99 ISO/TC 138/SC 6
ISO 10467:2004/Amd 1:2012
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1
95.99 ISO/TC 138/SC 6
ISO 10467:2018
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
60.60 ISO/TC 138/SC 6
ISO 11296-1:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11296-3:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11296-3:2009/Cor 1:2011
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes — Technical Corrigendum 1
95.99 ISO/TC 138/SC 8
ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO 11296-4:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
95.99 ISO/TC 138/SC 8
ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
60.60 ISO/TC 138/SC 8
ISO 11296-7:2011
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes
95.99 ISO/TC 138/SC 8
ISO 11296-7:2019
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes
60.60 ISO/TC 138/SC 8
ISO 11297-1:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11297-3:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 4: Lining with cured-in-place pipes
60.60 ISO/TC 138/SC 8
ISO 13229:2010
Thermoplastics piping systems for non-pressure applications — Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings — Determination of the viscosity number and K-value
90.93 ISO/TC 138/SC 1
ISO 13254:2010
Thermoplastics piping systems for non-pressure applications — Test method for watertightness
90.93 ISO/TC 138/SC 1
ISO 13255:2010
Thermoplastics piping systems for soil and waste discharge inside buildings — Test method for airtightness of joints
90.93 ISO/TC 138/SC 1
ISO 13257:2010
Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
95.99 ISO/TC 138/SC 1
ISO 13257:2018
Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
60.60 ISO/TC 138/SC 1
ISO 13259:2010
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
95.99 ISO/TC 138/SC 1
ISO 13259:2018
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
60.60 ISO/TC 138/SC 1
ISO 13260:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading
90.93 ISO/TC 138/SC 1
ISO 13260:2010/Amd 1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading — Amendment 1
60.60 ISO/TC 138/SC 1
ISO 13262:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics spirally-formed structured-wall pipes — Determination of the tensile strength of a seam
90.93 ISO/TC 138/SC 1
ISO 13263:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength
90.93 ISO/TC 138/SC 1
ISO 13264:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings
90.93 ISO/TC 138/SC 1
ISO 13265:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
90.93 ISO/TC 138/SC 1
ISO 13266:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
90.93 ISO/TC 138/SC 1
ISO 13267:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
90.93 ISO/TC 138/SC 1
ISO 13268:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
90.93 ISO/TC 138/SC 1
ISO 13272:2011
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
90.93 ISO/TC 138/SC 1
ISO 16611:2017
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
60.60 ISO/TC 138/SC 6
ISO 18672-1:2009
Plastics piping systems for non-pressure drainage and sewerage — Polyester resin concrete (PRC) — Part 1: Pipes and fittings with flexible joints
90.93 ISO/TC 138/SC 6
ISO 19220:2004
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Styrene copolymer blends (SAN + PVC)
90.93 ISO/TC 138/SC 1
ISO/DIS 19469-1.2
Plastic piping systems for non pressure underground drainage - Single wall corrugated piping systems of polyethylene (PE) and polypropylene (PP) — Part 1: General requirements and performance characteristics
40.98 ISO/TC 138/SC 1
ISO/DIS 19469-3.2
Plastic piping systems for non pressure underground drainage - Single wall corrugated piping systems of polyethylene (PE) and polypropylene (PP) — Part 3: Pipes and fittings
40.98 ISO/TC 138/SC 1
ISO 21138-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specifications and performance criteria for pipes, fittings and system
90.92 ISO/TC 138/SC 1
ISO 21138-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A
90.92 ISO/TC 138/SC 1
ISO 21138-3:2007
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B
90.92 ISO/TC 138/SC 1
ISO/PRF 21138-1
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specification and performance criteria for pipes, fittings and the system
50.00 ISO/TC 138/SC 1
ISO/PRF 21138-2
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A
50.00 ISO/TC 138/SC 1
ISO/PRF 21138-3
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B
50.00 ISO/TC 138/SC 1
ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 1: Replacement on the line by pipe bursting and pipe extraction
60.60 ISO/TC 138/SC 8
ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 2: Replacement off the line by horizontal directional drilling and impact moling
60.60 ISO/TC 138/SC 8
ISO 22306:2007
Fibre-reinforced cement pipe, joints and fittings for gravity systems
95.99 ISO/TC 77
ISO 23711:2003
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
90.93 ISO/TC 45/SC 4
ISO/DIS 23856
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
40.60 ISO/TC 138/SC 6
ISO 25780:2011
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques
90.92 ISO/TC 138/SC 6

По запросу ничего не найдено