Каталог стандартов

83.140.30 - Plastics pipes and fittings for non fluid use

Plastics pipes, fittings and valves for general use, смотри 23.040.20
Plastics pipes, fittings and valves for general use, смотри 23.040.45
Plastics pipes, fittings and valves for general use, смотри 23.060
  • Фильтр:
  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO/R 265:1962 [Withdrawn]
Pipes and fittings of plastics materials -- Socket fittings with spigot ends for domestic and industrial waste pipes -- Basic dimensions : Metric series
95.99 ISO/TC 138
ISO 2703:1973 [Withdrawn]
Buried unplasticized polyvinyl chloride (PVC) pipes for the supply of gaseous fuels -- Metric series -- Specification
95.99 ISO/TC 138/SC 4
ISO 3633:1991 [Withdrawn]
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings -- Specifications
95.99 ISO/TC 138/SC 1
ISO 4422:1990 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO 4435:1991 [Withdrawn]
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for buried drainage and sewerage systems -- Specifications
95.99 ISO/TC 138/SC 1
ISO 4437:1988 [Withdrawn]
Buried polyethylene (PE) pipes for the supply of gaseous fuels -- Metric series -- Specification
95.99 ISO/TC 138/SC 4
ISO 4437:1997 [Withdrawn]
Buried polyethylene (PE) pipes for the supply of gaseous fuels -- Metric series -- Specifications
95.99 ISO/TC 138/SC 4
95.99 ISO/TC 138/SC 4
ISO 4437:2007 [Withdrawn]
Buried polyethylene (PE) pipes for the supply of gaseous fuels -- Metric series -- Specifications
95.99 ISO/TC 138/SC 4
ISO 4437-1:2014
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 1: General
90.20 ISO/TC 138/SC 4
ISO 4437-2:2014
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 2: Pipes
90.20 ISO/TC 138/SC 4
ISO 4437-3:2014
Plastics piping systems for the supply of gaseous fuels -- Polyethylene (PE) -- Part 3: Fittings
90.20 ISO/TC 138/SC 4
ISO 4437-4:2015
Plastics piping systems for the supply of gaseous fuels -- Polyethylene (PE) -- Part 4: Valves
60.60 ISO/TC 138/SC 7
ISO 4437-5:2014
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 5: Fitness for purpose of the system
90.20 ISO/TC 138/SC 4
ISO 6993:1990 [Withdrawn]
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels -- Specification
95.99 ISO/TC 138/SC 4
ISO 6993:2001 [Withdrawn]
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels -- Specifications
95.99 ISO/TC 138/SC 4
ISO 6993-1:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
90.93 ISO/TC 138/SC 4
ISO 6993-2:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
90.93 ISO/TC 138/SC 4
ISO 6993-3:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
90.93 ISO/TC 138/SC 4
ISO 6993-4:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 4: Code of practice for design, handling and installation
90.93 ISO/TC 138/SC 4
ISO 7349:1983 [Withdrawn]
Thermoplastics valves -- Connection references
95.99 ISO/TC 138/SC 7
ISO 7508:1985 [Withdrawn]
Unplasticized polyvinyl chloride (PVC-U) valves for pipes under pressure -- Basic dimensions -- Metric series
95.99 ISO/TC 138/SC 7
ISO 7628:2010
Road vehicles -- Thermoplastics tubing for air braking systems
90.93 ISO/TC 22/SC 33
ISO 7628-1:1985 [Withdrawn]
Road vehicles -- Thermoplastic tubing for use in air braking systems -- Part 1: Dimensions and marking
95.99 ISO/TC 22
ISO 7628-1:1998 [Withdrawn]
Road vehicles -- Thermoplastics tubing for air braking systems -- Part 1: Dimensions and marking
95.99 ISO/TC 22
ISO 7628-2:1998 [Withdrawn]
Road vehicles -- Thermoplastics tubing for air braking systems -- Part 2: Mounting on vehicle and test methods
95.99 ISO/TC 22
95.99 ISO/TC 22
ISO/TR 7628-2:1986 [Withdrawn]
Road vehicles -- Thermoplastics tubing for use in air braking systems -- Part 2: Installation on the vehicle and test methods
95.99 ISO/TC 22
ISO 7671:1991 [Withdrawn]
Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings -- Specifications
95.99 ISO/TC 138/SC 1
ISO 7675:1991 [Withdrawn]
Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings -- Specifications
95.99 ISO/TC 138/SC 1
ISO 7682:1991 [Withdrawn]
Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings -- Specifications
95.99 ISO/TC 138/SC 1
ISO 8085-1:2001 [Withdrawn]
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 1: Fittings for socket fusion using heated tools
95.99 ISO/TC 138/SC 4
95.99 ISO/TC 138/SC 4
ISO 8085-2:2001 [Withdrawn]
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
95.99 ISO/TC 138/SC 4
95.99 ISO/TC 138/SC 4
95.99 ISO/TC 138/SC 4
ISO 8085-3:2001 [Withdrawn]
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 3: Electrofusion fittings
95.99 ISO/TC 138/SC 4
95.99 ISO/TC 138/SC 4
95.99 ISO/TC 138/SC 4
ISO 8233:1988
Thermoplastics valves -- Torque -- Test method
90.20 ISO/TC 138/SC 7
ISO 8242:1989 [Withdrawn]
Polypropylene (PP) valves for pipes under pressure -- Basic dimensions -- Metric series
95.99 ISO/TC 138/SC 7
ISO 8659:1989
Thermoplastics valves -- Fatigue strength -- Test method
90.92 ISO/TC 138/SC 7
ISO/DIS 8659 [Under development]
Thermoplastics valves -- Fatigue strength -- Test method
40.20 ISO/TC 138/SC 7
ISO 8770:1991 [Withdrawn]
High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings -- Specifications
95.99 ISO/TC 138/SC 1
ISO 8779:1992 [Withdrawn]
Polyethylene (PE) pipes for irrigation laterals -- Specifications
95.99 ISO/TC 138/SC 2
ISO 8795:1990 [Withdrawn]
Plastics pipes for the transport of water intended for human consumption -- Extractability of constituents -- Test method
95.99 ISO/TC 138/SC 5
ISO 8796:1989 [Withdrawn]
Polyethylene (PE) 25 pipes for irrigation laterals -- Susceptibility to environmental stress-cracking induced by insert-type fittings -- Test method and specification
95.99 ISO/TC 138/SC 2
ISO 9393-1:1994 [Withdrawn]
Thermoplastics valves -- Pressure test methods and requirements -- Part 1: General
95.99 ISO/TC 138/SC 7
ISO 9393-1:2004
Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 1: General
90.60 ISO/TC 138/SC 7
ISO 9393-2:1997 [Withdrawn]
Thermoplastics valves -- Pressure test methods and requirements -- Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves
95.99 ISO/TC 138/SC 7
95.99 ISO/TC 138/SC 7
ISO 9393-2:2005
Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 2: Test conditions and basic requirements
90.20 ISO/TC 138/SC 7
ISO 9808:1990
Solar water heaters -- Elastomeric materials for absorbers, connecting pipes and fittings -- Method of assessment
90.60 ISO/TC 180
ISO/TR 10837:1991 [Withdrawn]
Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
95.99 ISO/TC 138/SC 4
ISO 10838-1:2000 [Withdrawn]
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
95.99 ISO/TC 138/SC 4
ISO 10838-3:2001 [Withdrawn]
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm
95.99 ISO/TC 138/SC 4
ISO 10931-4:1997 [Withdrawn]
Plastics piping systems for industrial applications -- Poly(vinylidene fluoride) (PVDF) -- Part 4: Valves
95.99 ISO/TC 138/SC 7
ISO 10933:1997 [Withdrawn]
Polyethylene (PE) valves for gas distribution systems
95.99 ISO/TC 138/SC 7
ISO 11424:1996 [Withdrawn]
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines -- Specification
95.99 ISO/TC 45/SC 1
ISO 11424:2017
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines -- Specification
60.60 ISO/TC 45/SC 1
ISO 13775-1:2000 [Withdrawn]
Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications
95.99 ISO/TC 45/SC 1
ISO 13775-1:2015
Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications
60.60 ISO/TC 45/SC 1
ISO 13775-2:2000 [Withdrawn]
Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications
95.99 ISO/TC 45/SC 1
ISO 13775-2:2016
Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications
60.60 ISO/TC 45/SC 1
ISO 14692-1:2002 [Withdrawn]
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials
95.99 ISO/TC 67/SC 6
ISO 14692-1:2017
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials
60.60 ISO/TC 67/SC 6
ISO 14692-2:2002 [Withdrawn]
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture
95.99 ISO/TC 67/SC 6
95.99 ISO/TC 67/SC 6
ISO 14692-2:2017
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture
60.60 ISO/TC 67/SC 6
ISO 14692-3:2002 [Withdrawn]
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design
95.99 ISO/TC 67/SC 6
95.99 ISO/TC 67/SC 6
ISO 14692-3:2017
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design
60.60 ISO/TC 67/SC 6
ISO 14692-4:2002 [Withdrawn]
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation
95.99 ISO/TC 67/SC 6
95.99 ISO/TC 67/SC 6
ISO 14692-4:2017
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation
60.60 ISO/TC 67/SC 6
ISO 15840:2004
Ships and marine technology -- Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
90.60 ISO/TC 8/SC 3
ISO 16486-1:2012
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 1: General
90.92 ISO/TC 138/SC 4
60.60 ISO/TC 138/SC 4
ISO/CD 16486-1 [Under development]
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 1: General
30.99 ISO/TC 138/SC 4
ISO 16486-2:2012
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 2: Pipes
90.92 ISO/TC 138/SC 4
60.60 ISO/TC 138/SC 4
ISO/CD 16486-2 [Under development]
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 2: Pipes
30.99 ISO/TC 138/SC 4
ISO 16486-3:2012
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 3: Fittings
90.92 ISO/TC 138/SC 4
60.60 ISO/TC 138/SC 4
ISO/CD 16486-3 [Under development]
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 3: Fittings
30.99 ISO/TC 138/SC 4
ISO 16486-4:2016
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 4: Valves
60.60 ISO/TC 138/SC 7
ISO 16486-5:2012
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 5: Fitness for purpose of the system
90.92 ISO/TC 138/SC 4
ISO/WD 16486-5 [Under development]
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 5: Fitness for purpose of the system
20.20 ISO/TC 138/SC 4
ISO 16486-6:2012
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 6: Code of practice for design, handling and installation
90.92 ISO/TC 138/SC 4
ISO/WD 16486-6 [Under development]
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 6: Code of practice for design, handling and installation
20.20 ISO/TC 138/SC 4
ISO 22621-1:2007 [Withdrawn]
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -- Polyamide (PA) -- Part 1: General
95.99 ISO/TC 138/SC 4
ISO 22621-2:2007 [Withdrawn]
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -- Polyamide (PA) -- Part 2: Pipes
95.99 ISO/TC 138/SC 4
ISO 22621-3:2007 [Withdrawn]
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -- Polyamide (PA) -- Part 3: Fittings
95.99 ISO/TC 138/SC 4
ISO 22621-5:2010 [Withdrawn]
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -- Polyamide (PA) -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 4
ISO 22621-6:2010 [Withdrawn]
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -- Polyamide (PA) -- Part 6: Code of practice for design, handling and installation
95.99 ISO/TC 138/SC 4

По запросу ничего не найдено