• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO 802:1976
Aluminium oxide primarily used for the production of aluminium — Preparation and storage of test samples
95.99 ISO/TC 226
ISO 803:1976
Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C (conventional moisture)
95.99 ISO/TC 226
ISO 804:1976
Aluminium oxide primarily used for the production of aluminium — Preparation of solution for analysis — Method by alkaline fusion
90.60 ISO/TC 226
ISO 805:1976
Aluminium oxide primarily used for the production of aluminium — Determination of iron content — 1,10- Phenanthroline photometric method
95.99 ISO/TC 226
ISO 806:1976
Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 1 000 degrees C and 1 200 degrees C
95.99 ISO/TC 226
ISO 806:2004
Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C and 1 000 degrees C
90.93 ISO/TC 226
ISO 900:1977
Aluminium oxide primarily used for the production of aluminium — Determination of titanium content — Diantipyrylmethane photometric method
95.99 ISO/TC 226
ISO 901:1976
Aluminium oxide primarily used for the production of aluminium — Determination of absolute density — Pyknometer method
90.60 ISO/TC 226
ISO 902:1976
Aluminium oxide primarily used for the production of aluminium — Measurement of the angle of repose
90.60 ISO/TC 226
ISO 903:1976
Aluminium oxide primarily used for the production of aluminium — Determination of untamped density
95.99 ISO/TC 226
ISO 1232:1976
Aluminium oxide primarily used for the production of aluminium — Determination of silica content — Reduced molybdosilicate spectrophotometric method
95.99 ISO/TC 226
ISO 1617:1976
Aluminium oxide primarily used for the production of aluminium — Determination of sodium content — Flame emission spectrophotometric method
95.99 ISO/TC 226
ISO 1618:1976
Aluminium oxide primarily used for the production of aluminium — Determination of vanadium content — N-Benzoyl-N-phenylhydroxylamine photometric method
95.99 ISO/TC 226
ISO 2069:1976
Aluminium oxide primarily used for the production of aluminium — Determination of calcium content — Flame atomic absorption method
95.99 ISO/TC 226
ISO 2070:1981
Aluminium oxide primarily used for the production of aluminium — Determination of calcium content — Naphthalhydroxamic acid spectrophotometric method
95.99 ISO/TC 226
ISO 2070:1997
Aluminium oxide primarily used for the production of aluminium — Determination of calcium content
95.99 ISO/TC 226
ISO 2071:1976
Aluminium oxide primarily used for the production of aluminium — Determination of zinc content — Flame atomic absorption method
95.99 ISO/TC 226
ISO 2072:1981
Aluminium oxide primarily used for the production of aluminium — Determination of zinc content — PAN photometric method
95.99 ISO/TC 226
ISO 2073:1976
Aluminium oxide primarily used for the production of aluminium — Preparation of solution for analysis — Method by hydrochloric acid attack under pressure
90.60 ISO/TC 226
ISO 2828:1973
Aluminium oxide primarily used for the production of aluminium — Determination of fluorine content — Alizarin complexone and lanthanum chloride spectrophotometric method
90.93 ISO/TC 226
ISO 2829:1973
Aluminium oxide primarily used for the production of aluminium — Determination of phosphorus content — Reduced phosphomolybdate spectrophotometric method
90.93 ISO/TC 226
ISO 2865:1973
Aluminium oxide primarily used for the production of aluminium — Determination of boron content — Curcumin spectrophotometric method
90.93 ISO/TC 226
ISO 2865:1973/Cor 1:1991
Aluminium oxide primarily used for the production of aluminium — Determination of boron content — Curcumin spectrophotometric method — Technical Corrigendum 1
60.60 ISO/TC 226
ISO 2926:1974
Aluminium oxide primarily used for the production of aluminium — Particle size analysis — Sieving method
95.99 ISO/TC 226
ISO 2926:2005
Aluminium oxide used for the production of primary aluminium — Particle size analysis for the range 45 µm to 150 µm — Method using electroformed sieves
95.99 ISO/TC 226
ISO 2926:2013
Aluminium oxide used for the production of primary aluminium — Particle size analysis for the range 45 µm to 150 µm — Method using electroformed sieves
90.93 ISO/TC 226
ISO 2927:1973
Aluminium oxide primarily used for the production of aluminium — Sampling
90.93 ISO/TC 226
ISO 2961:1974
Aluminium oxide primarily used for the production of aluminium — Determination of an adsorption index
90.93 ISO/TC 226
ISO 3390:1976
Aluminium oxide primarily used for the production of aluminium — Determination of manganese content — Flame atomic absorption method
95.99 ISO/TC 226
ISO 3429:1976
Sodium fluoride primarily used for the production of aluminium — Determination of iron content — 1,10- Phenanthroline photometric method
90.93 ISO/TC 226
ISO 3430:1976
Sodium fluoride primarily used for the production of aluminium — Determination of silica content — Reduced molybdosilicate spectrophotometric method
90.93 ISO/TC 226
ISO 3431:1976
Sodium fluoride primarily used for the production of aluminium — Determination of soluble sulphates content — Turbidimetric method
90.93 ISO/TC 226
ISO 3566:1976
Sodium fluoride primarily used for the production of aluminium — Determination of chlorides content — Turbidimetric method
90.93 ISO/TC 226
ISO 5931:2000
Carbonaceous materials used in the production of aluminium — Calcined coke and calcined carbon products — Determination of total sulfur by the Eschka method
90.93 ISO/TC 226
ISO 5939:1980
Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of water content — Azeotropic distillation (Dean and Stark) method
90.60 ISO/TC 226
ISO 5940-1:2019
Carbonaceous materials for the production of aluminium — Pitch for electrodes — Part 1: Determination of softening point by the ring-and-ball method
60.60 ISO/TC 226
ISO 5940-2:2007
Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Part 2: Determination of the softening point (Mettler softening point method)
90.93 ISO/TC 226
ISO 5940:1981
Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of softening point by the ring-and-ball method
95.99 ISO/TC 226
ISO 6257:1980
Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Sampling
95.99 ISO/TC 226
ISO 6257:2002
Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Sampling
90.93 ISO/TC 226
ISO 6375:1980
Carbonaceous materials for the production of aluminium — Coke for electrodes — Sampling
90.60 ISO/TC 226
ISO 6376:1980
Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of content of toluene-insoluble material
90.60 ISO/TC 226
ISO 6791:1981
Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of contents of quinoline-insoluble material
90.60 ISO/TC 226
ISO 6997:1985
Carbonaceous materials for the production of aluminium — Calcined coke — Determination of apparent oil content — Heating method
90.60 ISO/TC 226
ISO 6998:1984
Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of coking value
95.99 ISO/TC 226
ISO 6998:1997
Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of coking value
90.60 ISO/TC 226
ISO 6998:1997/Cor 1:1999
Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of coking value — Technical Corrigendum 1
60.60 ISO/TC 226
ISO 6999:1983
Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of density — Pycnometric method
90.93 ISO/TC 226
ISO 8003:1985
Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Measurement of dynamic viscosity
90.60 ISO/TC 226
ISO 8004:1985
Carbonaceous materials for the production of aluminium — Calcined coke and calcined carbon products — Determination of the density in xylene — Pyknometric method
90.60 ISO/TC 226
ISO 8005:1984
Carbonaceous materials used in the production of aluminium — Green and calcined coke — Determination of ash content
95.99 ISO/TC 226
ISO 8005:2005
Carbonaceous materials used in the production of aluminium — Green and calcined coke — Determination of ash content
90.60 ISO/TC 226
ISO 8006:1985
Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Determination of ash
90.60 ISO/TC 226
ISO 8007-1:1999
Carbonaceous materials used in the production of aluminium — Sampling plans and sampling from individual units — Part 1: Cathode blocks
90.93 ISO/TC 226
ISO 8007-2:1999
Carbonaceous materials used in the production of aluminium — Sampling plans and sampling from individual units — Part 2: Prebaked anodes
90.93 ISO/TC 226
ISO 8007-3:2003
Carbonaceous materials used in the production of aluminium — Sampling plans and sampling from individual units — Part 3: Sidewall blocks
90.20 ISO/TC 226
ISO 8007:1985
Carbonaceous materials used in the production of aluminium — Sampling from cathodic blocks and prebaked anodes — General
95.99 ISO/TC 226
ISO 8008:1986
Aluminium oxide primarily used for the production of aluminium — Determination of specific surface area by nitrogen adsorption — Single-point method
95.99 ISO/TC 226
ISO 8008:2005
Aluminium oxide primarily used for the production of aluminium — Determination of specific surface area by nitrogen adsorption
90.20 ISO/TC 226
ISO 8220:1986
Aluminium oxide primarily used for the production of aluminium — Determination of the fine particle size distribution (less than 60 mu/m) — Method using electroformed sieves
90.93 ISO/TC 226
ISO 8658:1997
Carbonaceous materials for use in the production of aluminium — Green and calcined coke — Determination of trace elements by flame atomic absorption spectrometry
90.93 ISO/TC 226
ISO 8723:1986
Carbonaceous materials for the production of aluminium — Calcined coke — Determination of oil content — Method by solvent extraction
90.60 ISO/TC 226
ISO 9055:1988
Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of sulfur content by the bomb method
90.93 ISO/TC 226
ISO 9088:1997
Carbonaceous materials used for the production of aluminium — Cathode blocks and prebaked anodes — Determination of the density in xylene by a pyknometric method
90.60 ISO/TC 226
ISO 9406:1988
Carbonaceous materials for the production of aluminium — Green coke — Determination of volatile matter content by gravimetric analysis
95.99 ISO/TC 226
ISO 9406:1995
Carbonaceous materials for the production of aluminium — Green coke — Determination of volatile matter content by gravimetric analysis
90.93 ISO/TC 226
ISO 10142:1996
Carbonaceous materials for use in the production of aluminium — Calcined coke — Determination of grain stability using a laboratory vibration mill
90.93 ISO/TC 226
ISO 10143:1995
Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules
95.99 ISO/TC 226
ISO 10143:2014
Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules
95.99 ISO/TC 226
ISO 10143:2019
Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules
60.60 ISO/TC 226
ISO 10236:1995
Carbonaceous materials for the production of aluminium — Green coke and calcined coke for electrodes — Determination of bulk density (tapped)
90.93 ISO/TC 226
ISO 10237:1997
Carbonaceous materials for use in the production of aluminium — Calcined coke — Determination of residual-hydrogen content
90.60 ISO/TC 226
ISO 10238:1999
Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Determination of sulfur content by an instrumental method
90.93 ISO/TC 226
ISO 11412:1998
Carbonaceous materials for the production of aluminium — Calcined coke — Determination of water content
90.60 ISO/TC 226
ISO 11706:2012
Carbonaceous materials for the production of aluminium — Prebaked anodes — Determination of the fracture energy
90.60 ISO/TC 226
ISO 11713:2000
Carbonaceous materials used in the production of aluminium — Cathode blocks and baked anodes — Determination of electrical resistivity at ambient temperature
90.60 ISO/TC 226
ISO 12315:2010
Aluminium oxide primarily used for production of aluminium — Method for calculating the Al2O3 content of smelter-grade alumina
90.93 ISO/TC 226
ISO 12926:2012
Aluminium fluoride for industrial use — Determination of trace elements — Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
90.93 ISO/TC 226
ISO 12977:1999
Carbonaceous materials for use in the production of aluminium — Pitch for electrodes — Determination of volatile matter content
90.93 ISO/TC 226
ISO 12979:1999
Carbonaceous materials for use in the production of aluminium — Pitch for electrodes — Determination of C/H ratio in the quinoline-insoluble fraction
90.93 ISO/TC 226
ISO 12980:2000
Carbonaceous materials used in the production of aluminium — Green coke and calcined coke for electrodes — Analysis using an X-ray fluorescence method
90.93 ISO/TC 226
ISO 12981-1:2000
Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of the reactivity to carbon dioxide — Part 1: Loss in mass method
90.93 ISO/TC 226
ISO 12982-1:2000
Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of the reactivity to air — Part 1: Ignition temperature method
90.93 ISO/TC 226
ISO 12984:2000
Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of particle size distribution
95.99 ISO/TC 226
ISO 12984:2018
Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of particle size distribution
60.60 ISO/TC 226
ISO 12985-1:2000
Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 1: Determination of apparent density using a dimensions method
95.99 ISO/TC 226
ISO 12985-1:2018
Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 1: Determination of apparent density using a dimensions method
60.60 ISO/TC 226
ISO 12985-2:2000
Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 2: Determination of apparent density and of open porosity using a hydrostatic method
95.99 ISO/TC 226
ISO 12985-2:2018
Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 2: Determination of apparent density and of open porosity using a hydrostatic method
60.60 ISO/TC 226
ISO 12986-1:2000
Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 1: Determination of bending/shear strength by a three-point method
95.99 ISO/TC 226
ISO 12986-1:2014
Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 1: Determination of bending/shear strength by the three-point method
90.60 ISO/TC 226
ISO 12986-2:2005
Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-point method
95.99 ISO/TC 226
ISO 12986-2:2009
Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-point method
95.99 ISO/TC 226
ISO 12986-2:2014
Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-point method
90.60 ISO/TC 226
ISO 12987:2004
Carbonaceous materials for the production of aluminium — Anodes, cathodes blocks, sidewall blocks and baked ramming pastes — Determination of the thermal conductivity using a comparative method
90.93 ISO/TC 226
ISO 12988-1:2000
Carbonaceous materials used in the production of aluminium — Baked anodes — Determination of the reactivity to carbon dioxide — Part 1: Loss in mass method
90.93 ISO/TC 226
ISO 12988-2:2004
Carbonaceous materials used in the production of aluminium — Baked anodes — Determination of the reactivity to carbon dioxide — Part 2: Thermogravimetric method
90.93 ISO/TC 226
ISO 12989-1:2000
Carbonaceous materials used in the production of aluminium — Baked anodes and sidewall blocks — Determination of the reactivity to air — Part 1: Loss in mass method
90.93 ISO/TC 226
ISO 12989-2:2004
Carbonaceous materials used in the production of aluminium — Baked anodes and sidewall blocks — Determination of the reactivity to air — Part 2: Thermogravimetric method
90.93 ISO/TC 226
ISO 14420:2005
Carbonaceous products for the production of aluminium — Baked anodes and shaped carbon products — Determination of the coefficient of linear thermal expansion
90.92 ISO/TC 226
ISO/FDIS 14420
Carbonaceous products for the production of aluminium — Baked anodes and shaped carbon products — Determination of the coefficient of linear thermal expansion
50.20 ISO/TC 226
ISO 14422:1999
Carbonaceous materials used in the production of aluminium — Cold-ramming pastes — Methods of sampling
90.93 ISO/TC 226
ISO/TS 14423:1999
Carbonaceous materials used in the production of aluminium — Cold-ramming pastes — Determination of effective binder content and aggregate content by extraction with quinoline, and determination of aggregate size distribution
95.99 ISO/TC 226
ISO/TS 14425:1999
Carbonaceous materials used in the production of aluminium — Cold-ramming pastes — Determination of volatile-matter content of unbaked pastes
95.99 ISO/TC 226
ISO 14427:2004
Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Preparation of unbaked test specimens and determination of apparent density after compaction
90.93 ISO/TC 226
ISO 14428:2005
Carbonaceous materials for the production of aluminium — Cold and tepid ramming pastes — Expansion/shrinkage during baking
95.99 ISO/TC 226
ISO 14428:2019
Carbonaceous materials for the production of aluminium — Cold and tepid ramming pastes — Expansion/shrinkage during baking
60.60 ISO/TC 226
ISO 14435:2005
Carbonaceous materials for the production of aluminium — Petroleum coke — Determination of trace metals by inductively coupled plasma atomic emission spectrometry
90.60 ISO/TC 226
ISO 15379-1:2004
Carbonaceous materials for the production of aluminium — Cathode block materials — Part 1: Determination of the expansion due to sodium penetration with application of pressure
95.99 ISO/TC 226
ISO 15379-1:2015
Carbonaceous materials for the production of aluminium — Cathode block materials — Part 1: Determination of the expansion due to sodium penetration with application of pressure
95.99 ISO/TC 226
ISO 15379-1:2019
Carbonaceous materials for the production of aluminium — Cathode block materials — Part 1: Determination of the expansion due to sodium penetration with application of pressure
60.60 ISO/TC 226
ISO 15379-2:2004
Carbonaceous materials for the production of aluminium — Cathode block materials — Part 2: Determination of the expansion due to sodium penetration without application of pressure
95.99 ISO/TC 226
ISO 15379-2:2015
Carbonaceous materials for the production of aluminium — Cathode block materials — Part 2: Determination of the expansion due to sodium penetration without application of pressure
60.60 ISO/TC 226
ISO 15906:2007
Carbonaceous materials for the production of aluminium — Baked anodes — Determination of the air permeability
90.93 ISO/TC 226
ISO 17499:2006
Carbonaceous materials used in the production of aluminium — Determination of baking level expressed by equivalent temperature
90.93 ISO/TC 226
ISO 17500:2006
Aluminium oxide used for the production of primary aluminium — Determination of attrition index
90.93 ISO/TC 226
ISO 17544:2004
Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Determination of rammability of unbaked pastes
90.93 ISO/TC 226
ISO 18142:2014
Carbonaceous materials for the production of primary aluminium — Baked carbon bodies — Determination of the dynamic elasticity modulus by the resonance method
90.60 ISO/TC 226
ISO 18515:2007
Carbonaceous materials for the production of aluminium — Cathode blocks and baked anodes — Determination of compressive strength
95.99 ISO/TC 226
ISO 18515:2014
Carbonaceous materials for the production of aluminium — Cathode blocks and baked anodes — Determination of compressive strength
90.60 ISO/TC 226
ISO 18842:2015
Aluminium oxide primarily used for the production of aluminium — Method for the determination of tapped and untapped density
60.60 ISO/TC 226
ISO 18843:2015
Aluminium oxide primarily used for the production of aluminium — Method for the determination of flow time
60.60 ISO/TC 226
ISO 19950:2015
Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas
60.60 ISO/TC 226
ISO 20202:2004
Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Preparation of baked test pieces and determination of loss on baking
90.93 ISO/TC 226
ISO 20292:2009
Materials for the production of primary aluminium — Dense refractory bricks — Determination of cryolite resistance
90.93 ISO/TC 226
ISO 21687:2007
Carbonaceous materials used in the production of aluminium — Determination of density by gas pyknometry (volumetric) using helium as the analysis gas — Solid materials
90.93 ISO/TC 226
ISO/DIS 22731
Carbonaceous materials used in the production of aluminium — Cathode — Cathode abrasion testing
40.00 ISO/TC 226
ISO 23028:2019
Aluminium oxide primarily used for the production of aluminium — Preparation and storage of test samples
60.60 ISO/TC 226
ISO 23201:2015
Aluminium oxide primarily used for production of aluminium — Determination of trace elements — Wavelength dispersive X-ray fluorescence spectrometric method
60.60 ISO/TC 226
ISO 23202:2006
Aluminium oxide used for the production of aluminium — Determination of particles passing a 20 micrometre aperture sieve
90.93 ISO/TC 226

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.