• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO 1463:1982
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
95.99 ISO/TC 107
ISO 1463:2003
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
90.92 ISO/TC 107
ISO/CD 1463
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
30.20 ISO/TC 107
ISO 2063-1:2017
Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems
95.99 ISO/TC 107
ISO 2063-1:2019
Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems
60.60 ISO/TC 107
ISO 2063-2:2017
Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems
60.60 ISO/TC 107
ISO 2063:1991
Metallic and other inorganic coatings — Thermal spraying — Zinc, aluminium and their alloys
95.99 ISO/TC 107
ISO 2063:2005
Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys
95.99 ISO/TC 107
ISO 2064:1980
Metallic and other non-organic coatings — Definitions and conventions concerning the measurement of thickness
95.99 ISO/TC 107
ISO 2064:1996
Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness
90.93 ISO/TC 107
ISO 2085:1976
Anodizing of aluminium and its alloys — Check of continuity of thin anodic oxide coatings — Copper sulphate test
95.99 ISO/TC 79/SC 2
ISO 2085:2010
Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test
95.99 ISO/TC 79/SC 2
ISO 2085:2018
Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test
60.60 ISO/TC 79/SC 2
ISO 2106:1982
Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxide coatings — Gravimetric method
95.99 ISO/TC 79/SC 2
ISO 2106:1982/Amd 1:1983
Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxide coatings — Gravimetric method — Amendment 1
95.99 ISO/TC 79/SC 2
ISO 2106:2011
Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method
95.99 ISO/TC 79/SC 2
ISO 2106:2019
Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method
60.60 ISO/TC 79/SC 2
ISO 2128:1976
Anodizing of aluminium and its alloys — Determination of thickness of anodic oxide coatings — Non-destructive measurement by split-beam microscope
95.99 ISO/TC 79/SC 2
ISO 2128:2010
Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope
90.93 ISO/TC 79/SC 2
ISO 2135:1976
Anodizing of aluminium and its alloys — Accelerated test of lightfastness of coloured anodic oxide coatings
95.99 ISO/TC 79
ISO 2135:1984
Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
95.99 ISO/TC 79/SC 2
ISO 2135:2010
Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
95.99 ISO/TC 79/SC 2
ISO 2135:2017
Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
60.60 ISO/TC 79/SC 2
ISO 2143:1981
Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxide coatings after sealing — Dye spot test with prior acid treatment
95.99 ISO/TC 79/SC 2
ISO 2143:2010
Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment
95.99 ISO/TC 79/SC 2
ISO 2143:2017
Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment
60.60 ISO/TC 79/SC 2
ISO 2360:1982
Non-conductive coatings on non-magnetic basis metals — Measurement of coating thickness — Eddy current method
95.99 ISO/TC 107
ISO 2360:2003
Non-conductive coatings on non-magnetic electrically conductive basis materials — Measurement of coating thickness — Amplitude-sensitive eddy-current method
95.99 ISO/TC 107
ISO 2360:2017
Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method
60.60 ISO/TC 107
ISO 2376:1972
Anodization (anodic oxidation) of aluminium and its alloys — Insulation check by measurement of breakdown potential
95.99 ISO/TC 79/SC 2
ISO 2376:2010
Anodizing of aluminium and its alloys — Determination of electric breakdown potential
95.99 ISO/TC 79/SC 2
ISO 2376:2019
Anodizing of aluminium and its alloys — Determination of breakdown voltage and withstand voltage
60.60 ISO/TC 79/SC 2
ISO 2767:1973
Surface treatments of metals — Anodic oxidation of aluminium and its alloys — Specular reflectance at 45 degrees — Total reflectance — Image clarity
95.99 ISO/TC 79/SC 2
ISO 2931:1983
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance
95.99 ISO/TC 79/SC 2
ISO 2931:2010
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
95.99 ISO/TC 79/SC 2
ISO 2931:2017
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
60.60 ISO/TC 79/SC 2
ISO 2932:1981
Anodizing of aluminium and its alloys — Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution
95.99 ISO/TC 79/SC 2
ISO 3210:1983
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution
95.99 ISO/TC 79/SC 2
ISO 3210:2010
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution
95.99 ISO/TC 79/SC 2
ISO 3210:2017
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
60.60 ISO/TC 79/SC 2
ISO 3211:1977
Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxide coatings to cracking by deformation
95.99 ISO/TC 79/SC 2
ISO 3211:2010
Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation
95.99 ISO/TC 79/SC 2
ISO 3211:2018
Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation
60.60 ISO/TC 79/SC 2
ISO 3543:1981
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method
95.99 ISO/TC 107
ISO 3543:2000
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method
90.93 ISO/TC 107
ISO 3543:2000/Cor 1:2003
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method — Technical Corrigendum 1
60.60 ISO/TC 107
ISO 3613:1980
Chromate conversion coatings on zinc and cadmium — Test methods
95.99 ISO/TC 107
ISO 3613:2000
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
95.99 ISO/TC 107
ISO 3613:2010
Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
90.92 ISO/TC 107
ISO/WD 3613
Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
20.20 ISO/TC 107
ISO 3868:1976
Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method
90.93 ISO/TC 107
ISO 3882:1976
Metallic and other non-organic coatings — Review of methods of measurement of thickness
95.99 ISO/TC 107
ISO 3882:1986
Metallic and other non-organic coatings — Review of methods of measurement of thickness
95.99 ISO/TC 107
ISO 3882:2003
Metallic and other inorganic coatings — Review of methods of measurement of thickness
90.93 ISO/TC 107
ISO 3892:1980
Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
95.99 ISO/TC 107
ISO 3892:2000
Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
90.93 ISO/TC 107
ISO 4520:1981
Chromate conversion coatings on electroplated zinc and cadmium coatings
90.60 ISO/TC 107/SC 8
ISO 4536:1985
Metallic and non-organic coatings on metallic substrates — Saline droplets corrosion test (SD test)
90.93 ISO/TC 107/SC 7
ISO 4541:1978
Metallic and other non-organic coatings — Corrodkote corrosion test (CORR test)
90.93 ISO/TC 107/SC 7
ISO 4542:1981
Metallic and other non-organic coatings — General rules for stationary outdoor exposure corrosion tests
95.99 ISO/TC 107/SC 7
ISO 4543:1981
Metallic and other non-organic coatings — General rules for corrosion tests applicable for storage conditions
90.93 ISO/TC 107/SC 7
ISO 5190:1984
Anodizing of aluminium and its alloys — Evaluation of uniformity of appearance of architectural anodic finishes — Determination of diffuse reflectance and specular gloss
95.99 ISO/TC 79/SC 2
ISO 6581:1980
Anodizing of aluminium and its alloys — Determination of the fastness to ultra-violet light of coloured anodic oxide coatings
95.99 ISO/TC 79/SC 2
ISO 6581:2010
Anodizing of aluminium and its alloys — Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
95.99 ISO/TC 79/SC 2
ISO 6581:2018
Anodizing of aluminium and its alloys — Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
60.60 ISO/TC 79/SC 2
ISO 6719:1986
Anodized aluminium and aluminium alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
95.99 ISO/TC 79/SC 2
ISO 6719:2010
Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
90.93 ISO/TC 79/SC 2
ISO 6988:1985
Metallic and other non organic coatings — Sulfur dioxide test with general condensation of moisture
95.99 ISO/TC 156
ISO 7583:1986
Anodizing of aluminium and its alloys — Vocabulary
95.99 ISO/TC 79/SC 2
ISO 7583:2013
Anodizing of aluminium and its alloys — Terms and definitions
90.93 ISO/TC 79/SC 2
ISO 7599:1983
Anodizing of aluminium and its alloys — General specifications for anodic oxide coatings on aluminium
95.99 ISO/TC 79/SC 2
ISO 7599:2010
Anodizing of aluminium and its alloys — General specifications for anodic oxidation coatings on aluminium
95.99 ISO/TC 79/SC 2
ISO 7599:2018
Anodizing of aluminium and its alloys — Method for specifying decorative and protective anodic oxidation coatings on aluminium
60.60 ISO/TC 79/SC 2
ISO 7668:1986
Anodized aluminium and aluminium alloys — Measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
95.99 ISO/TC 79/SC 2
ISO 7668:2010
Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
95.99 ISO/TC 79/SC 2
ISO 7668:2018
Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
60.60 ISO/TC 79/SC 2
ISO 7759:1983
Anodizing of aluminium and its alloys — Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
95.99 ISO/TC 79/SC 2
ISO 7759:2010
Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
90.93 ISO/TC 79/SC 2
ISO/TR 8125:1984
Anodizing of aluminium and its alloys — Determination of colour and colour difference of coloured anodic coatings
95.99 ISO/TC 79/SC 2
ISO 8251:1987
Anodized aluminium and aluminium alloys — Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
95.99 ISO/TC 79/SC 2
ISO 8251:2011
Anodizing of aluminium and its alloys — Measurement of abrasion resistance of anodic oxidation coatings
95.99 ISO/TC 79/SC 2
ISO 8251:2018
Anodizing of aluminium and its alloys — Measurement of abrasion resistance of anodic oxidation coatings
60.60 ISO/TC 79/SC 2
ISO 8252:1987
Anodized aluminium and aluminium alloys — Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
95.99 ISO/TC 79/SC 2
ISO 8993:1989
Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Chart method
95.99 ISO/TC 79/SC 2
ISO 8993:2010
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method
95.99 ISO/TC 79/SC 2
ISO 8993:2018
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method
60.60 ISO/TC 79/SC 2
ISO 8994:1989
Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Grid method
95.99 ISO/TC 79/SC 2
ISO 8994:2011
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method
95.99 ISO/TC 79/SC 2
ISO 8994:2018
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method
60.60 ISO/TC 79/SC 2
ISO 9587:1999
Metallic and other inorganic coatings — Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement
95.99 ISO/TC 107/SC 3
ISO 9587:2007
Metallic and other inorganic coatings — Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
90.93 ISO/TC 107/SC 3
ISO 9588:1999
Metallic and other inorganic coatings — Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
95.99 ISO/TC 107/SC 3
ISO 9588:2007
Metallic and other inorganic coatings — Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
90.93 ISO/TC 107/SC 3
ISO 9717:1990
Phosphate conversion coatings for metals — Method of specifying requirements
95.99 ISO/TC 107/SC 8
ISO 9717:2010
Metallic and other inorganic coatings — Phosphate conversion coating of metals
95.99 ISO/TC 107/SC 8
ISO 9717:2017
Metallic and other inorganic coatings — Phosphate conversion coating of metals
60.60 ISO/TC 107/SC 8
ISO 10074:1994
Specification for hard anodic oxidation coatings on aluminium and its alloys
95.99 ISO/TC 79/SC 2
ISO 10074:2010
Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys
95.99 ISO/TC 79/SC 2
ISO 10074:2017
Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys
90.92 ISO/TC 79/SC 2
ISO/CD 10074
Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys
30.99 ISO/TC 79/SC 2
ISO 10111:2000
Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
95.99 ISO/TC 107
ISO 10111:2019
Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
60.60 ISO/TC 107
ISO 10215:1992
Anodized aluminium and aluminium alloys — Visual determination of image clarity of anodic oxidation coatings — Chart scale method
95.99 ISO/TC 79/SC 2
ISO 10215:2010
Anodizing of aluminium and its alloys — Visual determination of image clarity of anodic oxidation coatings — Chart scale method
95.99 ISO/TC 79/SC 2
ISO 10215:2018
Anodizing of aluminium and its alloys — Visual determination of image clarity of anodic oxidation coatings — Chart scale method
60.60 ISO/TC 79/SC 2
ISO 10216:1992
Anodized aluminium and aluminium alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method
95.99 ISO/TC 79/SC 2
ISO 10216:2010
Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method
95.99 ISO/TC 79/SC 2
ISO 10216:2010/Cor 1:2011
Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method — Technical Corrigendum 1
95.99 ISO/TC 79/SC 2
ISO 10216:2017
Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method
60.60 ISO/TC 79/SC 2
ISO 10289:1999
Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates — Rating of test specimens and manufactured articles subjected to corrosion tests
90.93 ISO/TC 107/SC 7
ISO 10546:1993
Chemical conversion coatings — Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
95.99 ISO/TC 107/SC 8
ISO 11408:1999
Chemical conversion coatings — Black oxide coating on iron and steel — Specification and test methods
90.93 ISO/TC 107/SC 8
ISO/TR 11728:1993
Anodized aluminium and aluminium alloys — Accelerated test of weather fastness of coloured anodic oxide coatings using cyclic artificial light and pollution gas
95.99 ISO/TC 79/SC 2
ISO 12670:2011
Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions
90.93 ISO/TC 107
ISO 12671:2012
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
90.92 ISO/TC 107
ISO/DIS 12671
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
40.20 ISO/TC 107
ISO 12679:2011
Thermal spraying — Recommendations for thermal spraying
90.93 ISO/TC 107
ISO 12690:2010
Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities
90.93 ISO/TC 107
ISO 12736:2014
Petroleum and natural gas industries — Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
90.20 ISO/TC 67/SC 2
ISO 13123:2011
Metallic and other inorganic coatings — Test method of cyclic heating for thermal-barrier coatings under temperature gradient
90.93 ISO/TC 107
ISO 13826:2013
Metallic and other inorganic coatings — Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method
90.93 ISO/TC 107
ISO 14188:2012
Metallic and other inorganic coatings — Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
90.93 ISO/TC 107
ISO 14231:2000
Thermal spraying — Acceptance inspection of thermal spraying equipment
90.93 ISO/TC 107
ISO 14232-1:2017
Thermal spraying — Powders — Part 1: Characterization and technical supply conditions
60.60 ISO/TC 107
ISO 14232:2000
Thermal spraying — Powders — Composition and technical supply conditions
95.99 ISO/TC 107
ISO/TR 14232-2:2017
Thermal spraying — Powders — Part 2: Comparison of coating performance and spray powder chemistry
60.60 ISO/TC 107
ISO 14916:1999
Thermal spraying — Determination of tensile adhesive strength
95.99 ISO/TC 107
ISO 14916:2017
Thermal spraying — Determination of tensile adhesive strength
60.60 ISO/TC 107
ISO 14917:1999
Thermal spraying — Terminology, classification
95.99 ISO/TC 107
ISO 14917:2017
Thermal spraying — Terminology, classification
60.60 ISO/TC 107
ISO 14918:1998
Thermal spraying — Approval testing of thermal sprayers
95.99 ISO/TC 107
ISO 14918:2018
Thermal spraying — Qualification testing of thermal sprayers
60.60 ISO/TC 107
ISO 14919:2001
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions
95.99 ISO/TC 107
ISO 14919:2015
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions
60.60 ISO/TC 107
ISO 14920:1999
Thermal spraying — Spraying and fusing of self-fluxing alloys
95.99 ISO/TC 107
ISO 14920:2015
Thermal spraying — Spraying and fusing of self-fluxing alloys
60.60 ISO/TC 107
ISO 14921:2001
Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components
95.99 ISO/TC 107
ISO 14921:2010
Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components
90.93 ISO/TC 107
ISO 14922-1:1999
Thermal spraying — Quality requirements of thermally sprayed structures — Part 1: Guidance for selection and use
90.92 ISO/TC 107
ISO 14922-2:1999
Thermal spraying — Quality requirements of thermally sprayed structures — Part 2: Comprehensive quality requirements
90.92 ISO/TC 107
ISO 14922-3:1999
Thermal spraying — Quality requirements of thermally sprayed structures — Part 3: Standard quality requirements
90.92 ISO/TC 107
ISO 14922-4:1999
Thermal spraying — Quality requirements of thermally sprayed structures — Part 4: Elementary quality requirements
90.92 ISO/TC 107
ISO 14923:2003
Thermal spraying — Characterization and testing of thermally sprayed coatings
90.20 ISO/TC 107
ISO 14924:2005
Thermal spraying — Post-treatment and finishing of thermally sprayed coatings
90.20 ISO/TC 107
ISO 15730:2000
Metallic and other inorganic coatings — Electropolishing as a means of smoothing and passivating stainless steel
90.93 ISO/TC 107/SC 8
ISO 16348:2003
Metallic and other inorganic coatings — Definitions and conventions concerning appearance
90.20 ISO/TC 107
ISO/TS 16688:2017
Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
60.60 ISO/TC 79/SC 2
ISO/TR 16689:2012
Anodizing of aluminium and its alloys — Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid/chromic acid immersion test — Evaluation of correlations
90.93 ISO/TC 79/SC 2
ISO 17834:2003
Thermal spraying — Coatings for protection against corrosion and oxidation at elevated temperatures
90.93 ISO/TC 107
ISO 17836:2004
Thermal spraying — Determination of the deposition efficiency for thermal spraying
95.99 ISO/TC 107
ISO 17836:2017
Thermal spraying — Determination of the deposition efficiency for thermal spraying
60.60 ISO/TC 107
ISO 18332:2007
Metallic and other inorganic coatings — Definitions and conventions concerning porosity
90.93 ISO/TC 107/SC 7
ISO 18555:2016
Metallic and other inorganic coatings — Determination of thermal conductivity of thermal barrier coatings
60.60 ISO/TC 107
ISO 18771:2019
Anodizing of aluminium and its alloys — Method to test the surface abrasion resistance using glass-coated abrasive paper
60.60 ISO/TC 79/SC 2
ISO 21164:2018
Metallic and other inorganic coatings — DC magnetron sputtered silver coatings for engineering purposes — Measurement of coating adhesion
60.60 ISO/TC 107
ISO/DIS 22462
Metallic and other inorganic coatings — Test methods of friction coefficient measurement of chemical conversion coatings
40.99 ISO/TC 107/SC 8
ISO/DIS 23052
Anodizing of aluminium and its alloy — Test methods of chemical resistance of anodic oxidation coatings on aluminium and its alloys using electromotive force apparatus
40.60 ISO/TC 79/SC 2
ISO/CD TR 23487-1.3
Metallic and other inorganic coatings — Corrosion protection of offshore wind turbines — Part 1: Duplex coating of towers
30.60 ISO/TC 107
ISO/CD TR 23487-2.2
Metallic and other inorganic coatings — Corrosion protection of offshore wind turbines — Part 2: Corrosion protection of foundation structures
30.60 ISO/TC 107
ISO/TR 26946:2011
Standard method for porosity measurement of thermally sprayed coatings
60.60 ISO/TC 107
ISO 27307:2015
Thermal spraying — Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing
60.60 ISO/TC 107
ISO 27830:2008
Metallic and other inorganic coatings — Guidelines for specifying metallic and inorganic coatings
95.99 ISO/TC 107/SC 3
ISO 27830:2017
Metallic and other inorganic coatings — Requirements for the designation of metallic and inorganic coatings
60.60 ISO/TC 107/SC 3
ISO 27831-1:2008
Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 1: Ferrous metals and alloys
90.93 ISO/TC 107/SC 3
ISO 27831-2:2008
Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 2: Non-ferrous metals and alloys
90.93 ISO/TC 107/SC 3
ISO 28340:2013
Combined coatings on aluminium — General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
90.93 ISO/TC 79/SC 2

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.