• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO 237:1975
Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares
90.93 ISO/TC 29/SC 9
ISO 513:1975
Application of carbides for machining by chip removal — Designation of the main groups of chip removal and groups of application
95.99 ISO/TC 29/SC 9
ISO 513:1991
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application
95.99 ISO/TC 29/SC 9
ISO 513:1991/Cor 1:1994
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application — Technical Corrigendum 1
95.99 ISO/TC 29/SC 9
ISO 513:2004
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
95.99 ISO/TC 29/SC 9
ISO 513:2012
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
90.93 ISO/TC 29/SC 9
ISO/R 524:1966
Withdrawal of ISO/R 524-1966
95.99 ISO/TC 29
ISO 529:1975/Amd 1:1981
Short machine taps and hand taps — Amendment 1
95.99 ISO/TC 29
ISO 883:1976
Indexable (throwaway) carbide inserts without fixation hole — Dimensions
95.99 ISO/TC 29
ISO 883:1985
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
95.99 ISO/TC 29/SC 9
ISO 883:2013
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
90.93 ISO/TC 29/SC 9
ISO 1832:1985
Indexable inserts for cutting tools — Designation
95.99 ISO/TC 29/SC 9
ISO 1832:1991
Indexable inserts for cutting tools — Designation
95.99 ISO/TC 29/SC 9
ISO 1832:1991/Amd 1:1999
Indexable inserts for cutting tools — Designation — Amendment 1: Tolerance on d and m of V-shape inserts
95.99 ISO/TC 29/SC 9
ISO 1832:2004
Indexable inserts for cutting tools — Designation
95.99 ISO/TC 29/SC 9
ISO 1832:2004/Cor 1:2005
Indexable inserts for cutting tools — Designation — Technical Corrigendum 1
95.99 ISO/TC 29/SC 9
ISO 1832:2012
Indexable inserts for cutting tools — Designation
95.99 ISO/TC 29/SC 9
ISO 1832:2017
Indexable inserts for cutting tools — Designation
60.60 ISO/TC 29/SC 9
ISO 2583:1972
Tool shanks and equipment with 7/24 tapers — Collar dimensions
95.99 ISO/TC 29
ISO 3002-1:1982
Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers
90.93 ISO/TC 29
ISO 3002-1:1982/Amd 1:1992
Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers — Amendment 1
60.60 ISO/TC 29
ISO 3002-2:1982
Basic quantities in cutting and grinding — Part 2: Geometry of the active part of cutting tools — General conversion formulae to relate tool and working angles
90.93 ISO/TC 29
ISO 3002-3:1984
Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting
90.93 ISO/TC 29
ISO 3002-4:1984
Basic quantities in cutting and grinding — Part 4: Forces, energy, power
90.93 ISO/TC 29
ISO 3002-5:1989
Basic quantities in cutting and grinding — Part 5: Basic terminology for grinding processes using grinding wheels
90.93 ISO/TC 29
ISO 3286:1976
Single point cutting tools — Corner radii
95.99 ISO/TC 29/SC 9
ISO 3286:2016
Single point cutting tools — Corner radii
60.60 ISO/TC 29/SC 9
ISO 3364:1977
Indexable (throwaway) carbide inserts with cylindrical fixation hole — Dimensions
95.99 ISO/TC 29
ISO 3364:1985
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
95.99 ISO/TC 29/SC 9
ISO 3364:1997
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
95.99 ISO/TC 29/SC 9
ISO 3364:2011
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
95.99 ISO/TC 29/SC 9
ISO 3364:2017
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
60.60 ISO/TC 29/SC 9
ISO 3365-1:1977
Indexable (throwaway) carbide inserts for milling cutters — Dimensions — Part 1: Square inserts
95.99 ISO/TC 29
ISO 3365-2:1980
Indexable (throwaway) hardmetal inserts for milling cutters — Dimensions — Part 2: Triangular inserts
95.99 ISO/TC 29
ISO 3365:1985
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
95.99 ISO/TC 29/SC 9
ISO 3365:2016
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
60.60 ISO/TC 29/SC 9
ISO 4203:1978
Parallel shank tools — Driving tenons and sockets — Dimensions
95.99 ISO/TC 29/SC 9
ISO 5610-10:2010
Tool holders with rectangular shank for indexable inserts — Part 10: Style N
95.99 ISO/TC 29/SC 9
ISO 5610-10:2014
Tool holders with rectangular shank for indexable inserts — Part 10: Style N
90.20 ISO/TC 29/SC 9
ISO 5610-11:2010
Tool holders with rectangular shank for indexable inserts — Part 11: Style R
95.99 ISO/TC 29/SC 9
ISO 5610-11:2014
Tool holders with rectangular shank for indexable inserts — Part 11: Style R
90.20 ISO/TC 29/SC 9
ISO 5610-12:2010
Tool holders with rectangular shank for indexable inserts — Part 12: Style S
95.99 ISO/TC 29/SC 9
ISO 5610-12:2014
Tool holders with rectangular shank for indexable inserts — Part 12: Style S
90.20 ISO/TC 29/SC 9
ISO 5610-13:2010
Tool holders with rectangular shank for indexable inserts — Part 13: Style T
95.99 ISO/TC 29/SC 9
ISO 5610-13:2014
Tool holders with rectangular shank for indexable inserts — Part 13: Style T
90.20 ISO/TC 29/SC 9
ISO 5610-14:2010
Tool holders with rectangular shank for indexable inserts — Part 14: Style H
95.99 ISO/TC 29/SC 9
ISO 5610-14:2014
Tool holders with rectangular shank for indexable inserts — Part 14: Style H
90.20 ISO/TC 29/SC 9
ISO 5610-15:2010
Tool holders with rectangular shank for indexable inserts — Part 15: Style V
95.99 ISO/TC 29/SC 9
ISO 5610-15:2014
Tool holders with rectangular shank for indexable inserts — Part 15: Style V
90.20 ISO/TC 29/SC 9
ISO 5610-1:2010
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
95.99 ISO/TC 29/SC 9
ISO 5610-1:2014
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
90.20 ISO/TC 29/SC 9
ISO 5610-2:2010
Tool holders with rectangular shank for indexable inserts — Part 2: Style A
95.99 ISO/TC 29/SC 9
ISO 5610-2:2014
Tool holders with rectangular shank for indexable inserts — Part 2: Style A
90.20 ISO/TC 29/SC 9
ISO 5610-3:2010
Tool holders with rectangular shank for indexable inserts — Part 3: Style B
95.99 ISO/TC 29/SC 9
ISO 5610-3:2014
Tool holders with rectangular shank for indexable inserts — Part 3: Style B
90.20 ISO/TC 29/SC 9
ISO 5610-4:2010
Tool holders with rectangular shank for indexable inserts — Part 4: Style D
95.99 ISO/TC 29/SC 9
ISO 5610-4:2014
Tool holders with rectangular shank for indexable inserts — Part 4: Style D
90.20 ISO/TC 29/SC 9
ISO 5610-5:2010
Tool holders with rectangular shank for indexable inserts — Part 5: Style F
95.99 ISO/TC 29/SC 9
ISO 5610-5:2014
Tool holders with rectangular shank for indexable inserts — Part 5: Style F
90.20 ISO/TC 29/SC 9
ISO 5610-6:2010
Tool holders with rectangular shank for indexable inserts — Part 6: Style G
95.99 ISO/TC 29/SC 9
ISO 5610-6:2014
Tool holders with rectangular shank for indexable inserts — Part 6: Style G
90.20 ISO/TC 29/SC 9
ISO 5610-7:2010
Tool holders with rectangular shank for indexable inserts — Part 7: Style J
95.99 ISO/TC 29/SC 9
ISO 5610-7:2014
Tool holders with rectangular shank for indexable inserts — Part 7: Style J
90.20 ISO/TC 29/SC 9
ISO 5610-8:2010
Tool holders with rectangular shank for indexable inserts — Part 8: Style K
95.99 ISO/TC 29/SC 9
ISO 5610-8:2014
Tool holders with rectangular shank for indexable inserts — Part 8: Style K
90.20 ISO/TC 29/SC 9
ISO 5610-9:2010
Tool holders with rectangular shank for indexable inserts — Part 9: Style L
95.99 ISO/TC 29/SC 9
ISO 5610-9:2014
Tool holders with rectangular shank for indexable inserts — Part 9: Style L
90.20 ISO/TC 29/SC 9
ISO 5611-10:2015
Cartridges, type A, for indexable inserts — Part 10: Style U
60.60 ISO/TC 29/SC 9
ISO 5611-11:2015
Cartridges, type A, for indexable inserts — Part 11: Style W
60.60 ISO/TC 29/SC 9
ISO 5611-12:2015
Cartridges, type A, for indexable inserts — Part 12: Style Y
60.60 ISO/TC 29/SC 9
ISO 5611-1:2015
Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions
60.60 ISO/TC 29/SC 9
ISO 5611-2:2015
Cartridges, type A, for indexable inserts — Part 2: Style F
60.60 ISO/TC 29/SC 9
ISO 5611-3:2015
Cartridges, type A, for indexable inserts — Part 3: Style G
60.60 ISO/TC 29/SC 9
ISO 5611-4:2015
Cartridges, type A, for indexable inserts — Part 4: Style J
60.60 ISO/TC 29/SC 9
ISO 5611-5:2015
Cartridges, type A, for indexable inserts — Part 5: Style K
60.60 ISO/TC 29/SC 9
ISO 5611-6:2015
Cartridges, type A, for indexable inserts — Part 6: Style L
60.60 ISO/TC 29/SC 9
ISO 5611-7:2015
Cartridges, type A, for indexable inserts — Part 7: Style R
60.60 ISO/TC 29/SC 9
ISO 5611-8:2015
Cartridges, type A, for indexable inserts — Part 8: Style S
60.60 ISO/TC 29/SC 9
ISO 5611-9:2015
Cartridges, type A, for indexable inserts — Part 9: Style T
60.60 ISO/TC 29/SC 9
ISO 5611:1981
Cartridges, type A, for indexable inserts — Dimensions
95.99 ISO/TC 29
ISO 5611:1981/Add 1:1986
Cartridges, type A, for indexable inserts — Dimensions — Addendum 1
95.99 ISO/TC 29/SC 9
ISO 5611:1995
Cartridges, type A, for indexable inserts — Dimensions
95.99 ISO/TC 29/SC 9
ISO 6987-1:1983
Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal clearance
95.99 ISO/TC 29/SC 9
ISO 6987-2:1990
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inserts with 11 degrees normal clearance
95.99 ISO/TC 29/SC 9
ISO 6987:1998
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions
95.99 ISO/TC 29/SC 9
ISO 6987:2012
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions
90.93 ISO/TC 29/SC 9
ISO/TR 6987-3:1990
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 3: V-shape inserts
95.99 ISO/TC 29/SC 9
ISO 9361-1:1991
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole
95.99 ISO/TC 29/SC 9
ISO 9361-1:2014
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole
90.20 ISO/TC 29/SC 9
ISO 9361-2:1991
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole
95.99 ISO/TC 29/SC 9
ISO 9361-2:2011
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole
90.93 ISO/TC 29/SC 9
ISO 10643:2009
Dimensions of accessories for cutter arbors with parallel key and tenon drive
90.93 ISO/TC 29/SC 9
ISO 10910:1995
Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
90.93 ISO/TC 29/SC 9
ISO 11054:1993
Cutting tools — Designation of high-speed steel groups
95.99 ISO/TC 29/SC 9
ISO 11054:2006
Cutting tools — Designation of high-speed steel groups
90.93 ISO/TC 29/SC 9
ISO/TR 11255:1994
Applicability of hard cutting materials for machining by chip removal — Information additional to ISO 513 designation
95.99 ISO/TC 29/SC 9
ISO 13399-1:2006
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model
90.93 ISO/TC 29
ISO 13399-1:2006/Amd 1:2010
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Amendment 1
60.60 ISO/TC 29
ISO 13399-1:2006/Cor 1:2008
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 1
60.60 ISO/TC 29
ISO 13399-1:2006/Cor 2:2011
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 2
60.60 ISO/TC 29
ISO/TS 13399-100:2004
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries
95.99 ISO/TC 29
ISO/TS 13399-100:2008
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries
90.93 ISO/TC 29
ISO/TS 13399-100:2008/Cor 1:2011
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries — Technical Corrigendum 1
60.60 ISO/TC 29
ISO/TS 13399-150:2008
Cutting tool data representation and exchange — Part 150: Usage guidelines
90.93 ISO/TC 29
ISO/TS 13399-201:2014
Cutting tool data representation and exchange — Part 201: Creation and exchange of 3D models — Regular inserts
90.93 ISO/TC 29
ISO/TS 13399-202:2015
Cutting tool data representation and exchange — Part 202: Creation and exchange of 3D models — Irregular inserts
90.93 ISO/TC 29
ISO/TS 13399-203:2015
Cutting tool data representation and exchange — Part 203: Creation and exchange of 3D models — Replaceable inserts for drilling
90.93 ISO/TC 29
ISO/TS 13399-204:2016
Cutting tool data representation and exchange — Part 204: Creation and exchange of 3D models — Inserts for reaming
90.93 ISO/TC 29
ISO/TS 13399-2:2005
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
95.99 ISO/TC 29
ISO/TS 13399-2:2005/Cor 1:2011
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items — Technical Corrigendum 1
95.99 ISO/TC 29
ISO/TS 13399-2:2014
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
90.93 ISO/TC 29
ISO/TS 13399-301:2013
Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
90.93 ISO/TC 29
ISO/TS 13399-302:2013
Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
90.93 ISO/TC 29
ISO/TS 13399-303:2016
Cutting tool data representation and exchange — Part 303: Creation and exchange of 3D models — Solid end mills
90.93 ISO/TC 29
ISO/TS 13399-304:2016
Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole
90.93 ISO/TC 29
ISO/TS 13399-305:2017
Cutting tool data representation and exchange — Part 305: Creation and exchange of 3D models — Modular tooling systems with adjustable cartridges for boring
60.60 ISO/TC 29
ISO/TS 13399-306:2018
Cutting tool data representation and exchange — Part 306: Creation and exchange of 3D models — Drills and countersinking tools for indexable inserts
60.60 ISO/TC 29
ISO/TS 13399-307:2016
Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts
90.93 ISO/TC 29
ISO/TS 13399-308:2016
Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts
90.93 ISO/TC 29
ISO/TS 13399-309:2016
Cutting tool data representation and exchange — Part 309: Creation and exchange of 3D models — Tool holders for indexable inserts
90.93 ISO/TC 29
ISO/TS 13399-310:2017
Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips
60.60 ISO/TC 29
ISO/TS 13399-311:2016
Cutting tool data representation and exchange — Part 311: Creation and exchange of 3D models — Solid reamers
90.93 ISO/TC 29
ISO/TS 13399-312:2016
Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts
90.93 ISO/TC 29
ISO/TS 13399-313:2019
Cutting tool data representation and exchange — Part 313: Creation and exchange of 3D models — Burrs
60.60 ISO/TC 29
ISO/TS 13399-314:2018
Cutting tool data representation and exchange — Part 314: Creation and exchange of 3D models — Cartridges for indexable inserts
60.60 ISO/TC 29
ISO/TS 13399-315:2018
Cutting tool data representation and exchange — Part 315: Creation and exchange of 3D models — Modelling of machine operated feed out tools
60.60 ISO/TC 29
ISO/TS 13399-3:2007
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
95.99 ISO/TC 29
ISO/TS 13399-3:2007/Cor 1:2011
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items — Technical Corrigendum 1
95.99 ISO/TC 29
ISO/TS 13399-3:2014
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
90.93 ISO/TC 29
ISO/TS 13399-401:2016
Cutting tool data representation and exchange — Part 401: Creation and exchange of 3D models — Converting, extending and reducing adaptive items
90.93 ISO/TC 29
ISO/TS 13399-403:2018
Cutting tool data representation and exchange — Part 403: Creation and exchange of 3D models — Modelling of driven tool units
60.60 ISO/TC 29
ISO/TS 13399-405:2016
Cutting tool data representation and exchange — Part 405: Creation and exchange of 3D models — Collets
90.93 ISO/TC 29
ISO/TS 13399-406:2019
Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface
60.60 ISO/TC 29
ISO/TS 13399-4:2007
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
95.99 ISO/TC 29
ISO/TS 13399-4:2007/Cor 1:2011
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items — Technical Corrigendum 1
95.99 ISO/TC 29
ISO/TS 13399-4:2014
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
90.93 ISO/TC 29
ISO/TS 13399-50:2007
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts
95.99 ISO/TC 29
ISO/TS 13399-50:2007/Cor 1:2011
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts — Technical Corrigendum 1
95.99 ISO/TC 29
ISO/TS 13399-50:2013
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts
90.93 ISO/TC 29
ISO/TS 13399-5:2007
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items
95.99 ISO/TC 29
ISO/TS 13399-5:2007/Cor 1:2011
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items — Technical Corrigendum 1
95.99 ISO/TC 29
ISO/TS 13399-5:2014
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items
90.93 ISO/TC 29
ISO/TS 13399-60:2007
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems
95.99 ISO/TC 29
ISO/TS 13399-60:2007/Cor 1:2011
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems — Technical Corrigendum 1
95.99 ISO/TC 29
ISO/TS 13399-60:2014
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems
90.93 ISO/TC 29
ISO/TS 13399-70:2016
Cutting tool data representation and exchange — Part 70: Graphical data layout — Layer setting for tool layout
90.20 ISO/TC 29
ISO/TS 13399-71:2016
Cutting tool data representation and exchange — Part 71: Graphical data layout — Creation of documents for standardized data exchange: Graphical product information
90.20 ISO/TC 29
ISO/TS 13399-72:2016
Cutting tool data representation and exchange — Part 72: Creation of documents for the standardized data exchange — Definition of properties for drawing header and their XML-data exchange
90.20 ISO/TC 29
ISO/TS 13399-80:2014
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles
95.99 ISO/TC 29
ISO/TS 13399-80:2017
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles
60.60 ISO/TC 29
ISO 16084:2017
Balancing of rotating tools and tool systems
60.60 ISO/TC 29
ISO 16462:2004
Cubic boron nitride inserts, tipped or solid — Dimensions, types
95.99 ISO/TC 29/SC 9
ISO 16462:2014
Cubic boron nitride inserts, tipped or solid — Dimensions, types
90.93 ISO/TC 29/SC 9
ISO 16463:2004
Polycristalline diamond inserts, tipped — Dimensions, types
95.99 ISO/TC 29/SC 9
ISO 16463:2014
Polycristalline diamond inserts, tipped — Dimensions, types
90.93 ISO/TC 29/SC 9
ISO 22180:2019
CVD diamond tools — Categorization
60.60 ISO/TC 29/SC 9

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.