• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO 264:1976
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series
95.99 ISO/TC 138/SC 2
ISO 264:1976/Add 1:1982
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series — Addendum 1: Diameters 200 mm and 225 mm
95.99 ISO/TC 138/SC 2
ISO 265-1:1988
Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series — Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
90.93 ISO/TC 138/SC 1
ISO/R 330:1963
Withdrawal of ISO/R 330-1963
95.99 ISO/TC 138
ISO 580:1973
Moulded fittings in unplasticized polyvinyl chloride (PVC) for use under pressure — Oven test
95.99 ISO/TC 138
ISO 580:1990
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings — Oven test — Test method and basic specifications
95.99 ISO/TC 138/SC 5
ISO 580:2005
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
90.93 ISO/TC 138/SC 5
ISO 727-1:2002
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 1: Metric series
90.93 ISO/TC 138/SC 2
ISO 727-2:2002
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 2: Inch-based series
95.99 ISO/TC 138/SC 2
ISO 727-2:2005
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 2: Inch-based series
90.93 ISO/TC 138/SC 2
ISO 727:1979
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Dimensions of sockets — Metric series
95.99 ISO/TC 138
ISO 727:1985
Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Dimensions of sockets — Metric series
95.99 ISO/TC 138/SC 2
ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
90.93 ISO/TC 138/SC 5
ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
90.20 ISO/TC 138/SC 5
ISO 1167-3:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components
90.93 ISO/TC 138/SC 5
ISO 1167-4:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies
90.93 ISO/TC 138/SC 5
ISO 1452-1:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General
90.93 ISO/TC 138/SC 2
ISO 1452-2:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 1452-3:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 1452-4:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves
90.93 ISO/TC 138/SC 2
ISO 1452-5:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO 2035:1974
Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Pressure-resistance test
95.99 ISO/TC 138/SC 5
ISO 2043:1974
Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Oven test
95.99 ISO/TC 138
ISO 2044:1974
Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe — Hydraulic internal pressure test
95.99 ISO/TC 138/SC 5
ISO 2045:1973
Single sockets for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement
95.99 ISO/TC 138
ISO 2045:1988
Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement
95.99 ISO/TC 138/SC 2
ISO 2048:1973
Double socket fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement
95.99 ISO/TC 138
ISO 2048:1990
Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement
95.99 ISO/TC 138/SC 2
ISO 2507-1:1995
Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
90.93 ISO/TC 138/SC 5
ISO 2507-2:1995
Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
90.93 ISO/TC 138/SC 5
ISO 2507-3:1995
Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
90.93 ISO/TC 138/SC 5
ISO 2507:1982
Unplasticized polyvinyl chloride (PVC) pipes and fittings — Vicat softening temperature — Test method and specification
95.99 ISO/TC 138/SC 5
ISO 3477:1981
Polypropylene (PP) pipes and fittings — Density — Determination and specification
95.99 ISO/TC 138/SC 5
ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings — Specification and determination of density
90.93 ISO/TC 138/SC 5
ISO 3603:1977
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness
90.93 ISO/TC 138/SC 2
ISO 3604:1976
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness under conditions of external hydraulic pressure
95.99 ISO/TC 138/SC 2
ISO 4056:1978
Polyethylene (PE) pipes and fittings — Designation of polyethylene, based on nominal density and melt flow index
95.99 ISO/TC 138
ISO 4132:1979
Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure — Laying lengths and size of threads — Metric series
90.93 ISO/TC 138/SC 2
ISO 4422-1:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 1: General
95.99 ISO/TC 138/SC 2
ISO 4422-2:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 2: Pipes (with or without integral sockets)
95.99 ISO/TC 138/SC 2
ISO 4422-3:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 3: Fittings and joints
95.99 ISO/TC 138/SC 2
ISO 4422-4:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 4: Valves and ancillary equipment
95.99 ISO/TC 138/SC 2
ISO 4422-5:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 4427-1:2007
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
95.99 ISO/TC 138/SC 2
ISO 4427-1:2007/Amd 1:2015
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
95.99 ISO/TC 138/SC 2
ISO 4427-1:2007/Cor 1:2008
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Technical Corrigendum 1
95.99 ISO/TC 138/SC 2
ISO 4427-1:2019
Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
60.60 ISO/TC 138/SC 2
ISO 4427-3:2007
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 4427-3:2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
60.60 ISO/TC 138/SC 2
ISO 4427-5:2007
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 4427-5:2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
60.60 ISO/TC 138/SC 2
ISO 4434:1977
Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure — Laying length and size of threads — Metric series
95.99 ISO/TC 138/SC 2
ISO 4439:1979
Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of density
90.93 ISO/TC 138/SC 5
ISO 4440-1:1994
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 1: Test method
95.99 ISO/TC 138/SC 5
ISO 4440-2:1994
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 2: Test conditions
95.99 ISO/TC 138/SC 5
ISO 4440:1980
Polyethylene (PE) pipes and fittings — Determination of melt flow rate
95.99 ISO/TC 138
ISO 4451:1980
Polyethylene (PE) pipes and fittings — Determination of reference density of uncoloured and black polyethylenes
95.99 ISO/TC 138/SC 5
ISO/TR 6285:1980
Pipes and fittings of acrylonitrile/butadiene/ styrene terpolymer (ABS) — Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO 6455:1983
Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure — Dimensions of laying lengths — Metric series
95.99 ISO/TC 138/SC 2
ISO 7245:1984
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) — General specification for moulding and extrusion materials
90.93 ISO/TC 138/SC 5
ISO 7246:1984
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) — General specification for moulding and extrusion materials
90.93 ISO/TC 138/SC 5
ISO 7279:1984
Polypropylene (PP) fittings for pipes under pressure — Sockets for fusion using heated tools — Metric series — Dimensions of sockets
95.99 ISO/TC 138/SC 2
ISO 7370:1983
Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings — Nominal diameters, specified diameters and standard lengths
95.99 ISO/TC 138/SC 6
ISO 7432:2002
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
95.99 ISO/TC 138/SC 6
ISO 7432:2018
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
90.92 ISO/TC 138/SC 6
ISO/NP 7432
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
10.99 ISO/TC 138/SC 6
ISO/TR 7471:1981
Polypropylene (PP) pipes and fittings — Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO/TR 7472:1981
Low density polyethylene pipes and fittings — Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO/TR 7473:1981
Unplasticized polyvinyl chloride pipes and fittings — Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO/TR 7474:1981
High density polyethylene pipes and fittings — Chemical resistance with respect to fluids to be conveyed
95.99 ISO/TC 138
ISO 7510:1997
Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents using the gravimetric method
95.99 ISO/TC 138/SC 6
ISO 7510:2017
Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents
60.60 ISO/TC 138/SC 6
ISO 7511:1999
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the leaktightness of the wall under short-term internal pressure
90.93 ISO/TC 138/SC 6
ISO 7686:1992
Plastics pipes and fittings — Opacity — Test method
95.99 ISO/TC 138/SC 5
ISO 7686:2005
Plastics pipes and fittings — Determination of opacity
90.93 ISO/TC 138/SC 5
ISO 8283-1:1991
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
90.93 ISO/TC 138/SC 1
ISO 8283-2:1992
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE)
90.60 ISO/TC 138/SC 1
ISO 8283-3:1992
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)
90.20 ISO/TC 138/SC 1
ISO 8283-4:1992
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)
90.60 ISO/TC 138/SC 1
ISO 8361-1:1991
Thermoplastics pipes and fittings — Water absorption — Part 1: General test method
90.93 ISO/TC 138/SC 5
ISO 8361-2:1991
Thermoplastics pipes and fittings — Water absorption — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
90.93 ISO/TC 138/SC 5
ISO 8361-3:1991
Thermoplastics pipes and fittings — Water absorption — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
90.93 ISO/TC 138/SC 5
ISO 8483:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints
95.99 ISO/TC 138/SC 6
ISO 8483:2003/Amd 1:2012
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints — Amendment 1
95.99 ISO/TC 138/SC 6
ISO 8483:2019
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints
60.60 ISO/TC 138/SC 6
ISO 8533:2003
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints
95.99 ISO/TC 138/SC 6
ISO 8533:2003/Amd 1:2012
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints — Amendment 1
95.99 ISO/TC 138/SC 6
ISO 8533:2019
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of cemented or wrapped joints
60.60 ISO/TC 138/SC 6
ISO 8772:1991
High-density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems — Specifications
95.99 ISO/TC 138/SC 1
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
90.93 ISO/TC 138/SC 1
ISO 8773:1991
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems — Specifications
95.99 ISO/TC 138/SC 1
ISO 8773:2006
Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP)
90.93 ISO/TC 138/SC 1
ISO 9623:1997
PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure — Design lengths and size of threads — Metric series
90.93 ISO/TC 138/SC 2
ISO 9625:1993
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
95.99 ISO/TC 138/SC 2
ISO 9853:1991
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems — Crushing test
90.93 ISO/TC 138/SC 5
ISO 10147:1994
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
95.99 ISO/TC 138/SC 5
ISO 10147:2004
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
95.99 ISO/TC 138/SC 5
ISO 10147:2004/Amd 1:2008
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content — Amendment 1
95.99 ISO/TC 138/SC 5
ISO 10147:2011
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
90.93 ISO/TC 138/SC 5
ISO/TR 10358:1993
Plastics pipes and fittings — Combined chemical-resistance classification table
90.92 ISO/TC 138/SC 3
ISO 10508:1995
Thermoplastics pipes and fittings for hot and cold water systems
95.99 ISO/TC 138/SC 2
ISO 10508:2006
Plastics piping systems for hot and cold water installations — Guidance for classification and design
90.93 ISO/TC 138/SC 2
ISO 10508:2006/Amd 1:2018
Plastics piping systems for hot and cold water installations — Guidance for classification and design — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 10928:1997
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
95.99 ISO/TC 138/SC 6
ISO 10928:2009
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
95.99 ISO/TC 138/SC 6
ISO 10928:2009/Amd 1:2013
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use — Amendment 1
95.99 ISO/TC 138/SC 6
ISO 10928:2016
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
60.60 ISO/TC 138/SC 6
ISO 10931-3:1996
Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Part 3: Fittings
95.99 ISO/TC 138/SC 3
ISO 10952:1999
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack from the inside of a section in a deflected condition
95.99 ISO/TC 138/SC 6
ISO 10952:2008
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
95.99 ISO/TC 138/SC 6
ISO 10952:2014
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
90.60 ISO/TC 138/SC 6
ISO 11296-1:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11296-3:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11296-3:2009/Cor 1:2011
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes — Technical Corrigendum 1
95.99 ISO/TC 138/SC 8
ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO 11296-4:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
95.99 ISO/TC 138/SC 8
ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
60.60 ISO/TC 138/SC 8
ISO 11296-7:2011
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes
95.99 ISO/TC 138/SC 8
ISO 11296-7:2019
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes
60.60 ISO/TC 138/SC 8
ISO 11297-1:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11297-3:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 4: Lining with cured-in-place pipes
60.60 ISO/TC 138/SC 8
ISO 11298-1:2010
Plastics piping systems for renovation of underground water supply networks — Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks — Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11298-3:2010
Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO/DIS 11298-4
Plastics piping systems for renovation of underground water supply networks — Part 4: Lining with cured-in-place pipes
40.60 ISO/TC 138/SC 8
ISO 11299-1:2011
Plastics piping systems for renovation of underground gas supply networks — Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11299-1:2018
Plastics piping systems for renovation of underground gas supply networks — Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks — Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11299-3:2011
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11299-3:2018
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO 11420:1996
Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds
95.99 ISO/TC 138/SC 5
ISO/TR 11647:1996
Fusion compatibility of polyethylene (PE) pipes and fittings
95.99 ISO/TC 138/SC 5
ISO 12092:2000
Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure — Resistance to internal pressure — Test method
95.99 ISO/TC 138/SC 5
ISO 12162:1995
Thermoplastics materials for pipes and fittings for pressure applications — Classification and designation — Overall service (design) coefficient
95.99 ISO/TC 138/SC 5
ISO 12162:2009
Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
90.93 ISO/TC 138/SC 5
ISO 12176-1:1998
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
ISO 12176-1:2006
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
ISO 12176-1:2012
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
ISO 12176-1:2017
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
60.60 ISO/TC 138/SC 4
ISO 12176-2:2000
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
95.99 ISO/TC 138/SC 4
ISO 12176-2:2008
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
90.93 ISO/TC 138/SC 4
ISO 12176-3:2001
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
95.99 ISO/TC 138/SC 4
ISO 12176-3:2006
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
95.99 ISO/TC 138/SC 4
ISO 12176-3:2011
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
90.93 ISO/TC 138/SC 4
ISO 12176-4:2003
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding
90.93 ISO/TC 138/SC 4
ISO/DIS 12176-5
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems
40.60 ISO/TC 138/SC 4
ISO 13260:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading
90.93 ISO/TC 138/SC 1
ISO 13260:2010/Amd 1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading — Amendment 1
60.60 ISO/TC 138/SC 1
ISO 13262:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics spirally-formed structured-wall pipes — Determination of the tensile strength of a seam
90.93 ISO/TC 138/SC 1
ISO 13263:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength
90.93 ISO/TC 138/SC 1
ISO 13264:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings
90.93 ISO/TC 138/SC 1
ISO 13265:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
90.93 ISO/TC 138/SC 1
ISO 13266:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
90.93 ISO/TC 138/SC 1
ISO 13267:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
90.93 ISO/TC 138/SC 1
ISO 13268:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
90.93 ISO/TC 138/SC 1
ISO 13272:2011
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
90.93 ISO/TC 138/SC 1
ISO 13761:1996
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
95.99 ISO/TC 138/SC 5
ISO 13761:2017
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
60.60 ISO/TC 138/SC 5
ISO 13924:2000
Plastics pipes and fittings — Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
90.93 ISO/TC 138/SC 5
ISO 13949:1997
Method for the assessment of the degree of pigment dispersion in polyolefin pipes, fittings and compounds
95.99 ISO/TC 138/SC 5
ISO 13950:2007
Plastics pipes and fittings — Automatic recognition systems for electrofusion joints
90.93 ISO/TC 138/SC 4
ISO 13950:2007/Cor 1:2008
Plastics pipes and fittings — Automatic recognition systems for electrofusion joints — Technical Corrigendum 1
60.60 ISO/TC 138/SC 4
ISO/TR 13950:1997
Plastics pipes and fittings — Automatic recognition systems for electrofusion
95.99 ISO/TC 138/SC 4
ISO 13957:1997
Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance
90.93 ISO/TC 138/SC 5
ISO 13966:1998
Thermoplastics pipes and fittings — Nominal ring stiffnesses
90.93 ISO/TC 138
ISO 13967:1998
Thermoplastics fittings — Determination of ring stiffness
95.99 ISO/TC 138/SC 5
ISO 13967:2009
Thermoplastics fittings — Determination of ring stiffness
90.93 ISO/TC 138/SC 5
ISO 14236:2000
Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
95.99 ISO/TC 138/SC 2
ISO 14531-1:2002
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes
90.93 ISO/TC 138/SC 4
ISO 14531-2:2004
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 2: Fittings for heat-fusion jointing
90.93 ISO/TC 138/SC 4
ISO 14531-3:2006
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
95.99 ISO/TC 138/SC 4
ISO 14531-3:2010
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
90.93 ISO/TC 138/SC 4
ISO 14531-4:2006
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 4: System design and installation guidelines
90.93 ISO/TC 138/SC 4
ISO 15306:2003
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal pressure
90.93 ISO/TC 138/SC 6
ISO 15306:2003/Amd 1:2012
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal pressure — Amendment 1
60.60 ISO/TC 138/SC 6
ISO 15439-1:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) — Polyamide (PA) — Part 1: General
95.99 ISO/TC 138/SC 4
ISO 15439-2:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) — Polyamide (PA) — Part 2: Pipes
95.99 ISO/TC 138/SC 4
ISO 15439-3:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) — Polyamide (PA) — Part 3: Fittings
95.99 ISO/TC 138/SC 4
ISO 15874-3:2003
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15874-3:2013
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 15874-3:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 15875-3:2003
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
90.60 ISO/TC 138/SC 2
ISO 15876-3:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15876-3:2017
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings
60.60 ISO/TC 138/SC 2
ISO 15877-3:2003
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15877-3:2009
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 15877-3:2009/Amd 1:2010
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 16241:2005
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
90.93 ISO/TC 138/SC 5
ISO 16422:2006
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
95.99 ISO/TC 138/SC 2
ISO 16422:2014
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
90.60 ISO/TC 138/SC 2
ISO 16611:2017
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
60.60 ISO/TC 138/SC 6
ISO 16871:2003
Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
90.93 ISO/TC 138/SC 5
ISO/TR 16913:1999
Plastics pipes and fittings — Definitions of types of test
90.93 ISO/TC 138/SC 5
ISO 17467-1:2012
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 1: General
95.99 ISO/TC 138/SC 4
ISO 17467-2:2012
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 2: Pipes
95.99 ISO/TC 138/SC 4
ISO 17467-3:2012
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 3: Fittings
95.99 ISO/TC 138/SC 4
ISO 17484-1:2006
Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems
95.99 ISO/TC 138/SC 4
ISO 17484-1:2006/Cor 1:2008
Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
ISO 17484-1:2014
Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems
90.60 ISO/TC 138/SC 4
ISO 17484-2:2009
Plastics piping systems — Multilayer pipe systems for indoor gas installations — Part 2: Code of pratice
90.60 ISO/TC 138/SC 4
ISO 17885:2015
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications
90.92 ISO/TC 138/SC 4
ISO 17885:2015/Amd 1:2016
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications — Amendment 1
60.60 ISO/TC 138/SC 4
ISO/CD 17885
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications
30.99 ISO/TC 138/SC 4
ISO/TS 17902:2016
Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
90.20 ISO/TC 138/SC 1
ISO 18225:2007
Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems
95.99 ISO/TC 138/SC 4
ISO 18225:2012
Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems
90.93 ISO/TC 138/SC 4
ISO/TS 18226:2006
Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
90.93 ISO/TC 138/SC 4
ISO 18488:2015
Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
60.60 ISO/TC 138/SC 5
ISO 18489:2015
Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
60.60 ISO/TC 138/SC 5
ISO 18553:2002
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
90.92 ISO/TC 138/SC 5
ISO 18553:2002/Amd 1:2007
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds — Amendment 1
60.60 ISO/TC 138/SC 5
ISO 18672-1:2009
Plastics piping systems for non-pressure drainage and sewerage — Polyester resin concrete (PRC) — Part 1: Pipes and fittings with flexible joints
90.93 ISO/TC 138/SC 6
ISO/TR 19480:2005
Polyethylene pipes and fittings for the supply of gaseous fuels or water — Training and assessment of fusion operators
90.93 ISO/TC 138/SC 4
ISO 19893:2011
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of mounted assemblies to temperature cycling
90.93 ISO/TC 138/SC 5
ISO/TS 19911:2010
Plastics pipes and fittings — Format of a technical file for characterizing PE spigot end fittings
90.93 ISO/TC 138/SC 5
ISO 21003-3:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 21004:2006
Plastics piping systems — Multilayer pipes and their joints, based on thermoplastics, for water supply
90.93 ISO/TC 138/SC 2
ISO 21138-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specifications and performance criteria for pipes, fittings and system
90.92 ISO/TC 138/SC 1
ISO 21138-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A
90.92 ISO/TC 138/SC 1
ISO 21138-3:2007
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B
90.92 ISO/TC 138/SC 1
ISO/PRF 21138-1
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specification and performance criteria for pipes, fittings and the system
50.00 ISO/TC 138/SC 1
ISO/PRF 21138-2
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A
50.00 ISO/TC 138/SC 1
ISO/PRF 21138-3
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B
50.00 ISO/TC 138/SC 1
ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 1: Replacement on the line by pipe bursting and pipe extraction
60.60 ISO/TC 138/SC 8
ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 2: Replacement off the line by horizontal directional drilling and impact moling
60.60 ISO/TC 138/SC 8
ISO 21307:2009
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
95.99 ISO/TC 138/SC 4
ISO 21307:2011
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
95.99 ISO/TC 138/SC 4
ISO 21307:2017
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems
60.60 ISO/TC 138/SC 4
ISO 21307:2017/DAmd 1
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems — Amendment 1
40.99 ISO/TC 138/SC 4
ISO 21751:2011
Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test
90.93 ISO/TC 138/SC 5
ISO 22391-3:2007
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 22391-3:2009
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO/TS 26873:2010
Plastics pipes and fittings — Definition and construction procedures for reference lines
90.93 ISO/TC 138/SC 5

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.