• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO/IEC Guide 71:2014
Guide for addressing accessibility in standards
60.60 ISO/TMBG
ISO 1503:1977
Geometrical orientation and directions of movements
95.99 ISO/TC 159/SC 4
ISO 1503:2008
Spatial orientation and direction of movement — Ergonomic requirements
90.93 ISO/TC 159/SC 4
ISO 6385:1981
Ergonomic principles in the design of work systems
95.99 ISO/TC 159
ISO 6385:2004
Ergonomic principles in the design of work systems
95.99 ISO/TC 159/SC 1
ISO 6385:2016
Ergonomics principles in the design of work systems
60.60 ISO/TC 159/SC 1
ISO 7243:1982
Hot environments — Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
95.99 ISO/TC 159/SC 5
ISO 7243:1989
Hot environments — Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
95.99 ISO/TC 159/SC 5
ISO 7243:2017
Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index
60.60 ISO/TC 159/SC 5
ISO 7250-1:2008
Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks
95.99 ISO/TC 159/SC 3
ISO 7250-1:2017
Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks
60.60 ISO/TC 159/SC 3
ISO 7250-3:2015
Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards
60.60 ISO/TC 159/SC 3
ISO 7250:1996
Basic human body measurements for technological design
95.99 ISO/TC 159/SC 3
ISO/TR 7250-2:2010
Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations
60.60 ISO/TC 159/SC 3
ISO/TR 7250-2:2010/Amd 1:2013
Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations — Amendment 1
60.60 ISO/TC 159/SC 3
ISO 7726:1985
Thermal environments — Instruments and methods for measuring physical quantities
95.99 ISO/TC 159/SC 5
ISO 7726:1998
Ergonomics of the thermal environment — Instruments for measuring physical quantities
90.92 ISO/TC 159/SC 5
ISO 7730:1984
Moderate thermal environments — Determination of the PMV and PPD indices and specification of the conditions for thermal comfort
95.99 ISO/TC 159/SC 5
ISO 7730:1994
Moderate thermal environments — Determination of the PMV and PPD indices and specification of the conditions for thermal comfort
95.99 ISO/TC 159/SC 5
ISO 7730:2005
Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
90.92 ISO/TC 159/SC 5
ISO/DIS 7730
Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
40.99 ISO/TC 159/SC 5
ISO 7731:1986
Danger signals for work places — Auditory danger signals
95.99 ISO/TC 159/SC 5
ISO 7731:2003
Ergonomics — Danger signals for public and work areas — Auditory danger signals
90.93 ISO/TC 159/SC 5
ISO 7933:1989
Hot environments — Analytical determination and interpretation of thermal stress using calculation of required sweat rate
95.99 ISO/TC 159/SC 5
ISO 7933:2004
Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
90.92 ISO/TC 159/SC 5
ISO/DIS 7933
Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using the predicted heat strain model
40.98 ISO/TC 159/SC 5
ISO 8995-1:2002
Lighting of work places — Part 1: Indoor
90.93 ISO/TC 274
ISO 8995-1:2002/Cor 1:2005
Lighting of work places — Part 1: Indoor — Technical Corrigendum 1
60.60 ISO/TC 274
ISO 8995-3:2006
Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places
95.99 ISO/TC 274
ISO 8995:1989
Principles of visual ergonomics — The lighting of indoor work systems
95.99 ISO/TC 159/SC 5
ISO/CIE 8995-3:2018
Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places
60.60 ISO/TC 274
ISO 8996:1990
Ergonomics — Determination of metabolic heat production
95.99 ISO/TC 159/SC 5
ISO 8996:2004
Ergonomics of the thermal environment — Determination of metabolic rate
90.92 ISO/TC 159/SC 5
ISO/CD 8996
Ergonomics of the thermal environment — Determination of metabolic rate
30.99 ISO/TC 159/SC 5
ISO 9241-10:1996
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 10: Dialogue principles
95.99 ISO/TC 159/SC 4
ISO 9241-110:2006
Ergonomics of human-system interaction — Part 110: Dialogue principles
90.92 ISO/TC 159/SC 4
ISO 9241-112:2017
Ergonomics of human-system interaction — Part 112: Principles for the presentation of information
60.60 ISO/TC 159/SC 4
ISO 9241-11:1998
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 11: Guidance on usability
95.99 ISO/TC 159/SC 4
ISO 9241-11:2018
Ergonomics of human-system interaction — Part 11: Usability: Definitions and concepts
60.60 ISO/TC 159/SC 4
ISO 9241-125:2017
Ergonomics of human-system interaction — Part 125: Guidance on visual presentation of information
60.60 ISO/TC 159/SC 4
ISO 9241-129:2010
Ergonomics of human-system interaction — Part 129: Guidance on software individualization
90.93 ISO/TC 159/SC 4
ISO 9241-12:1998
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 12: Presentation of information
95.99 ISO/TC 159/SC 4
ISO 9241-13:1998
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 13: User guidance
90.60 ISO/TC 159/SC 4
ISO 9241-143:2012
Ergonomics of human-system interaction — Part 143: Forms
90.93 ISO/TC 159/SC 4
ISO 9241-14:1997
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 14: Menu dialogues
90.93 ISO/TC 159/SC 4
ISO 9241-151:2008
Ergonomics of human-system interaction — Part 151: Guidance on World Wide Web user interfaces
95.99 ISO/TC 159/SC 4
ISO 9241-154:2013
Ergonomics of human-system interaction — Part 154: Interactive voice response (IVR) applications
90.60 ISO/TC 159/SC 4
ISO 9241-15:1997
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 15: Command dialogues
95.99 ISO/TC 159/SC 4
ISO 9241-161:2016
Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements
60.60 ISO/TC 159/SC 4
ISO 9241-16:1999
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 16: Direct manipulation dialogues
95.99 ISO/TC 159/SC 4
ISO 9241-171:2008
Ergonomics of human-system interaction — Part 171: Guidance on software accessibility
90.93 ISO/TC 159/SC 4
ISO 9241-17:1998
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 17: Form filling dialogues
95.99 ISO/TC 159/SC 4
ISO 9241-1:1992
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 1: General introduction
95.99 ISO/TC 159/SC 4
ISO 9241-1:1997
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 1: General introduction
90.93 ISO/TC 159/SC 4
ISO 9241-1:1997/Amd 1:2001
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 1: General introduction — Amendment 1
60.60 ISO/TC 159/SC 4
ISO 9241-20:2008
Ergonomics of human-system interaction — Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services
90.93 ISO/TC 159/SC 4
ISO 9241-210:2010
Ergonomics of human-system interaction — Part 210: Human-centred design for interactive systems
95.99 ISO/TC 159/SC 4
ISO 9241-210:2019
Ergonomics of human-system interaction — Part 210: Human-centred design for interactive systems
60.60 ISO/TC 159/SC 4
ISO 9241-220:2019
Ergonomics of human-system interaction — Part 220: Processes for enabling, executing and assessing human-centred design within organizations
60.60 ISO/TC 159/SC 4
ISO 9241-2:1992
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 2: Guidance on task requirements
90.60 ISO/TC 159/SC 4
ISO 9241-300:2008
Ergonomics of human-system interaction — Part 300: Introduction to electronic visual display requirements
90.93 ISO/TC 159/SC 4
ISO 9241-302:2008
Ergonomics of human-system interaction — Part 302: Terminology for electronic visual displays
90.93 ISO/TC 159/SC 4
ISO 9241-303:2008
Ergonomics of human-system interaction — Part 303: Requirements for electronic visual displays
95.99 ISO/TC 159/SC 4
ISO 9241-303:2011
Ergonomics of human-system interaction — Part 303: Requirements for electronic visual displays
90.93 ISO/TC 159/SC 4
ISO 9241-304:2008
Ergonomics of human-system interaction — Part 304: User performance test methods for electronic visual displays
90.93 ISO/TC 159/SC 4
ISO 9241-305:2008
Ergonomics of human-system interaction — Part 305: Optical laboratory test methods for electronic visual displays
90.93 ISO/TC 159/SC 4
ISO 9241-306:2008
Ergonomics of human-system interaction — Part 306: Field assessment methods for electronic visual displays
95.99 ISO/TC 159/SC 4
ISO 9241-306:2018
Ergonomics of human-system interaction — Part 306: Field assessment methods for electronic visual displays
60.60 ISO/TC 159/SC 4
ISO 9241-307:2008
Ergonomics of human-system interaction — Part 307: Analysis and compliance test methods for electronic visual displays
90.93 ISO/TC 159/SC 4
ISO 9241-333:2017
Ergonomics of human-system interaction — Part 333: Stereoscopic displays using glasses
60.60 ISO/TC 159/SC 4
ISO 9241-391:2016
Ergonomics of human-system interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures
60.60 ISO/TC 159/SC 4
ISO 9241-392:2015
Ergonomics of human-system interaction — Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images
60.60 ISO/TC 159/SC 4
ISO 9241-3:1992
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 3: Visual display requirements
95.99 ISO/TC 159/SC 4
ISO 9241-3:1992/Amd 1:2000
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 3: Visual display requirements — Amendment 1: .
95.99 ISO/TC 159/SC 4
ISO 9241-400:2007
Ergonomics of human—system interaction — Part 400: Principles and requirements for physical input devices
90.93 ISO/TC 159/SC 4
ISO 9241-410:2008
Ergonomics of human-system interaction — Part 410: Design criteria for physical input devices
90.60 ISO/TC 159/SC 4
ISO 9241-410:2008/Amd 1:2012
Ergonomics of human-system interaction — Part 410: Design criteria for physical input devices — Amendment 1
60.60 ISO/TC 159/SC 4
ISO 9241-420:2011
Ergonomics of human-system interaction — Part 420: Selection of physical input devices
90.93 ISO/TC 159/SC 4
ISO 9241-4:1998
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 4: Keyboard requirements
95.99 ISO/TC 159/SC 4
ISO 9241-4:1998/Cor 1:2000
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 4: Keyboard requirements — Technical Corrigendum 1
95.99 ISO/TC 159/SC 4
ISO 9241-500:2018
Ergonomics of human-system interaction — Part 500: Ergonomic principles for the design and evaluation of environments of interactive systems
60.60 ISO/TC 159/SC 4
ISO 9241-5:1998
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 5: Workstation layout and postural requirements
90.93 ISO/TC 159/SC 4
ISO 9241-6:1999
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 6: Guidance on the work environment
90.60 ISO/TC 159/SC 4
ISO 9241-7:1998
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 7: Requirements for display with reflections
95.99 ISO/TC 159/SC 4
ISO 9241-8:1997
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 8: Requirements for displayed colours
95.99 ISO/TC 159/SC 4
ISO 9241-910:2011
Ergonomics of human-system interaction — Part 910: Framework for tactile and haptic interaction
90.93 ISO/TC 159/SC 4
ISO 9241-920:2009
Ergonomics of human-system interaction — Part 920: Guidance on tactile and haptic interactions
90.60 ISO/TC 159/SC 4
ISO 9241-940:2017
Ergonomics of human-system interaction — Part 940: Evaluation of tactile and haptic interactions
60.60 ISO/TC 159/SC 4
ISO 9241-960:2017
Ergonomics of human-system interaction — Part 960: Framework and guidance for gesture interactions
60.60 ISO/TC 159/SC 4
ISO 9241-9:2000
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 9: Requirements for non-keyboard input devices
95.99 ISO/TC 159/SC 4
ISO/CD 9241-971
Ergonomics of human-system interaction — Part 971: Guidance on physical (tactile/haptic) accessibility
30.60 ISO/TC 159/SC 4
ISO/CD TR 9241-380
Survey result of HMD (Head-Mounted Displays) — Part 380: Characteristics related to human-system interaction
30.00 ISO/TC 159/SC 4
ISO/CD TR 9241-810
Ergonomics of human-system interaction — Part 810: Robotic, intelligent and autonomous systems
30.00 ISO/TC 159/SC 4
ISO/DIS 9241-110
Ergonomics of human-system interaction — Part 110: Interaction principles
40.20 ISO/TC 159/SC 4
ISO/DIS 9241-394
Ergonomics of human-system interaction — Part 394: Ergonomic requirements for reducing undesirable biomedical effects of visually induced motion sickness during watching electronic images
40.60 ISO/TC 159/SC 4
ISO/DTR 9241-100
Ergonomics of human-system interaction — Part 100: Introduction to standards related to software ergonomics
30.98 ISO/TC 159/SC 4
ISO/DTR 9241-393
Ergonomics of human-system interaction — Part 393: Structured literature review of visually induced motion sickness during watching electronic imagesof human-system interaction
30.99 ISO/TC 159/SC 4
ISO/PRF TS 9241-126
Ergonomics of human-system interaction — Part 126: Guidance on the presentation of auditory information
50.00 ISO/TC 159/SC 4
ISO/TR 9241-100:2010
Ergonomics of human-system interaction — Part 100: Introduction to standards related to software ergonomics
60.60 ISO/TC 159/SC 4
ISO/TR 9241-308:2008
Ergonomics of human-system interaction — Part 308: Surface-conduction electron-emitter displays (SED)
60.60 ISO/TC 159/SC 4
ISO/TR 9241-309:2008
Ergonomics of human-system interaction — Part 309: Organic light-emitting diode (OLED) displays
60.60 ISO/TC 159/SC 4
ISO/TR 9241-310:2010
Ergonomics of human-system interaction — Part 310: Visibility, aesthetics and ergonomics of pixel defects
60.60 ISO/TC 159/SC 4
ISO/TR 9241-331:2012
Ergonomics of human-system interaction — Part 331: Optical characteristics of autostereoscopic displays
60.60 ISO/TC 159/SC 4
ISO/TS 9241-411:2012
Ergonomics of human-system interaction — Part 411: Evaluation methods for the design of physical input devices
90.93 ISO/TC 159/SC 4
ISO 9355-1:1999
Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators
90.93 ISO/TC 159/SC 4
ISO 9355-2:1999
Ergonomic requirements for the design of displays and control actuators — Part 2: Displays
90.93 ISO/TC 159/SC 4
ISO 9355-3:2006
Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators
90.93 ISO/TC 159/SC 4
ISO 9886:1992
Evaluation of thermal strain by physiological measurements
95.99 ISO/TC 159/SC 5
ISO 9886:2004
Ergonomics — Evaluation of thermal strain by physiological measurements
90.60 ISO/TC 159/SC 5
ISO 9920:1995
Ergonomics of the thermal environment — Estimation of the thermal insulation and evaporative resistance of a clothing ensemble
95.99 ISO/TC 159/SC 5
ISO 9920:2007
Ergonomics of the thermal environment — Estimation of thermal insulation and water vapour resistance of a clothing ensemble
90.60 ISO/TC 159/SC 5
ISO 9921-1:1996
Ergonomic assessment of speech communication — Part 1: Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method)
95.99 ISO/TC 159/SC 5
ISO 9921:2003
Ergonomics — Assessment of speech communication
90.93 ISO/TC 159/SC 5
ISO 10075-1:2017
Ergonomic principles related to mental workload — Part 1: General issues and concepts, terms and definitions
60.60 ISO/TC 159/SC 1
ISO 10075-2:1996
Ergonomic principles related to mental workload — Part 2: Design principles
90.92 ISO/TC 159/SC 1
ISO 10075-3:2004
Ergonomic principles related to mental workload — Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
90.93 ISO/TC 159/SC 1
ISO 10075:1991
Ergonomic principles related to mental work-load — General terms and definitions
95.99 ISO/TC 159/SC 1
ISO 10551:1995
Ergonomics of the thermal environment — Assessment of the influence of the thermal environment using subjective judgement scales
95.99 ISO/TC 159/SC 5
ISO 10551:2019
Ergonomics of the physical environment — Subjective judgement scales for assessing physical environments
60.60 ISO/TC 159/SC 5
ISO 11064-1:2000
Ergonomic design of control centres — Part 1: Principles for the design of control centres
90.60 ISO/TC 159/SC 4
ISO 11064-2:2000
Ergonomic design of control centres — Part 2: Principles for the arrangement of control suites
90.60 ISO/TC 159/SC 4
ISO 11064-3:1999
Ergonomic design of control centres — Part 3: Control room layout
90.60 ISO/TC 159/SC 4
ISO 11064-3:1999/Cor 1:2002
Ergonomic design of control centres — Part 3: Control room layout — Technical Corrigendum 1
60.60 ISO/TC 159/SC 4
ISO 11064-4:2004
Ergonomic design of control centres — Part 4: Layout and dimensions of workstations
95.99 ISO/TC 159/SC 4
ISO 11064-4:2013
Ergonomic design of control centres — Part 4: Layout and dimensions of workstations
90.93 ISO/TC 159/SC 4
ISO 11064-5:2008
Ergonomic design of control centres — Part 5: Displays and controls
90.93 ISO/TC 159/SC 4
ISO 11064-6:2005
Ergonomic design of control centres — Part 6: Environmental requirements for control centres
90.60 ISO/TC 159/SC 4
ISO 11064-7:2006
Ergonomic design of control centres — Part 7: Principles for the evaluation of control centres
90.20 ISO/TC 159/SC 4
ISO/DTR 11064-10
Ergonomic design of control centres — Part 10: Introduction to the control room design series of standards
30.60 ISO/TC 159/SC 4
ISO 11079:2007
Ergonomics of the thermal environment — Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects
90.92 ISO/TC 159/SC 5
ISO/TR 11079:1993
Evaluation of cold environments — Determination of required clothing insulation (IREQ)
95.99 ISO/TC 159/SC 5
ISO 11226:2000
Ergonomics — Evaluation of static working postures
90.93 ISO/TC 159/SC 3
ISO 11226:2000/Cor 1:2006
Ergonomics — Evaluation of static working postures — Technical Corrigendum 1
60.60 ISO/TC 159/SC 3
ISO 11228-1:2003
Ergonomics — Manual handling — Part 1: Lifting and carrying
90.92 ISO/TC 159/SC 3
ISO 11228-2:2007
Ergonomics — Manual handling — Part 2: Pushing and pulling
90.93 ISO/TC 159/SC 3
ISO 11228-3:2007
Ergonomics — Manual handling — Part 3: Handling of low loads at high frequency
90.93 ISO/TC 159/SC 3
ISO/DIS 11228-1
Ergonomics — Manual handling — Part 1: Lifting, lowering and carrying
40.20 ISO/TC 159/SC 3
ISO 11399:1995
Ergonomics of the thermal environment — Principles and application of relevant International Standards
90.60 ISO/TC 159/SC 5
ISO 11428:1996
Ergonomics — Visual danger signals — General requirements, design and testing
90.60 ISO/TC 159/SC 5
ISO 11429:1996
Ergonomics — System of auditory and visual danger and information signals
90.60 ISO/TC 159/SC 5
ISO/TR 12295:2014
Ergonomics — Application document for International Standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) and evaluation of static working postures (ISO 11226)
60.60 ISO/TC 159/SC 3
ISO/TR 12296:2012
Ergonomics — Manual handling of people in the healthcare sector
60.60 ISO/TC 159/SC 3
ISO 12894:2001
Ergonomics of the thermal environment — Medical supervision of individuals exposed to extreme hot or cold environments
90.60 ISO/TC 159/SC 5
ISO 13406-1:1999
Ergonomic requirements for work with visual displays based on flat panels — Part 1: Introduction
95.99 ISO/TC 159/SC 4
ISO 13406-2:2001
Ergonomic requirements for work with visual displays based on flat panels — Part 2: Ergonomic requirements for flat panel displays
95.99 ISO/TC 159/SC 4
ISO 13407:1999
Human-centred design processes for interactive systems
95.99 ISO/TC 159/SC 4
ISO 13731:2001
Ergonomics of the thermal environment — Vocabulary and symbols
90.20 ISO/TC 159/SC 5
ISO 13732-1:2006
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
90.60 ISO/TC 159/SC 5
ISO 13732-3:2005
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces
90.93 ISO/TC 159/SC 5
ISO/TS 13732-2:2001
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature
90.60 ISO/TC 159/SC 5
ISO/TS 14198:2012
Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems
95.99 ISO/TC 22/SC 39
ISO/TS 14198:2019
Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems
60.60 ISO/TC 22/SC 39
ISO/TS 14415:2005
Ergonomics of the thermal environment — Application of International Standards to people with special requirements
95.99 ISO/TC 159/SC 5
ISO 14505-2:2006
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature
90.92 ISO/TC 159/SC 5
ISO 14505-2:2006/Cor 1:2007
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature — Technical Corrigendum 1
60.60 ISO/TC 159/SC 5
ISO 14505-3:2006
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 3: Evaluation of thermal comfort using human subjects
90.60 ISO/TC 159/SC 5
ISO/CD 14505-4
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 4: Determination of the equivalent temperature by means of a numerical manikin
30.60 ISO/TC 159/SC 5
ISO/TS 14505-1:2007
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 1: Principles and methods for assessment of thermal stress
90.93 ISO/TC 159/SC 5
ISO 14738:2002
Safety of machinery — Anthropometric requirements for the design of workstations at machinery
90.92 ISO/TC 159/SC 3
ISO 14738:2002/Cor 1:2003
Safety of machinery — Anthropometric requirements for the design of workstations at machinery — Technical Corrigendum 1
60.60 ISO/TC 159/SC 3
ISO 14738:2002/Cor 2:2005
Safety of machinery — Anthropometric requirements for the design of workstations at machinery — Technical Corrigendum 2: .
60.60 ISO/TC 159/SC 3
ISO/CD 14738
Safety of machinery — Anthropometric requirements for the design of workstations for industries and services
30.99 ISO/TC 159/SC 3
ISO 14915-1:2002
Software ergonomics for multimedia user interfaces — Part 1: Design principles and framework
90.93 ISO/TC 159/SC 4
ISO 14915-2:2003
Software ergonomics for multimedia user interfaces — Part 2: Multimedia navigation and control
90.60 ISO/TC 159/SC 4
ISO 14915-3:2002
Software ergonomics for multimedia user interfaces — Part 3: Media selection and combination
95.99 ISO/TC 159/SC 4
ISO 15005:2002
Road vehicles — Ergonomic aspects of transport information and control systems — Dialogue management principles and compliance procedures
95.99 ISO/TC 22/SC 39
ISO 15005:2017
Road vehicles — Ergonomic aspects of transportation and control systems — Dialogue management principles and compliance procedures
60.60 ISO/TC 22/SC 39
ISO 15006:2011
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications for in-vehicle auditory presentation
90.93 ISO/TC 22/SC 39
ISO 15007-1:2002
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters
95.99 ISO/TC 22
ISO 15007-1:2014
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters
90.92 ISO/TC 22/SC 39
ISO/DIS 15007
Road vehicles — Measurement and analysis of driver visual behaviour with respect to transport information and control systems
40.60 ISO/TC 22/SC 39
ISO/TS 15007-2:2001
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures
95.99 ISO/TC 22
ISO/TS 15007-2:2014
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures
90.92 ISO/TC 22/SC 39
ISO 15008:2003
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and compliance procedures for in-vehicle visual presentation
95.99 ISO/TC 22
ISO 15008:2009
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and test procedures for in-vehicle visual presentation
95.99 ISO/TC 22/SC 39
ISO 15008:2017
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and test procedures for in-vehicle visual presentation
60.60 ISO/TC 22/SC 39
ISO 15265:2004
Ergonomics of the thermal environment — Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions
90.20 ISO/TC 159/SC 5
ISO 15534-1:2000
Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
90.92 ISO/TC 159/SC 3
ISO 15534-2:2000
Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
90.92 ISO/TC 159/SC 3
ISO 15534-3:2000
Ergonomic design for the safety of machinery — Part 3: Anthropometric data
90.92 ISO/TC 159/SC 3
ISO 15535:2003
General requirements for establishing anthropometric databases
95.99 ISO/TC 159/SC 3
ISO 15535:2006
General requirements for establishing anthropometric databases
95.99 ISO/TC 159/SC 3
ISO 15535:2012
General requirements for establishing anthropometric databases
90.93 ISO/TC 159/SC 3
ISO 15536-1:2005
Ergonomics — Computer manikins and body templates — Part 1: General requirements
90.20 ISO/TC 159/SC 3
ISO 15536-2:2007
Ergonomics — Computer manikins and body templates — Part 2: Verification of functions and validation of dimensions for computer manikin systems
90.93 ISO/TC 159/SC 3
ISO 15537:2004
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
90.92 ISO/TC 159/SC 3
ISO/AWI 15537
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
20.00 ISO/TC 159/SC 3
ISO 15743:2008
Ergonomics of the thermal environment — Cold workplaces — Risk assessment and management
90.20 ISO/TC 159/SC 5
ISO/TS 16071:2003
Ergonomics of human-system interaction — Guidance on accessibility for human-computer interfaces
95.99 ISO/TC 159/SC 4
ISO 16121-1:2005
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 1: General description, basic requirements
95.99 ISO/TC 22
ISO 16121-1:2012
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 1: General description, basic requirements
90.93 ISO/TC 22/SC 39
ISO 16121-2:2005
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 2: Visibility
95.99 ISO/TC 22
ISO 16121-2:2011
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 2: Visibility
90.93 ISO/TC 22/SC 39
ISO 16121-3:2005
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 3: Information devices and controls
95.99 ISO/TC 22
ISO 16121-3:2011
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 3: Information devices and controls
90.93 ISO/TC 22/SC 39
ISO 16121-4:2005
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 4: Cabin environment
95.99 ISO/TC 22
ISO 16121-4:2011
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 4: Cabin environment
90.93 ISO/TC 22/SC 39
ISO/TR 16352:2005
Road vehicles — Ergonomic aspects of in-vehicle presentation for transport information and control systems — Warning systems
60.60 ISO/TC 22/SC 39
ISO 16505:2015
Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures
95.99 ISO/TC 22/SC 35
ISO 16505:2019
Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures
60.60 ISO/TC 22/SC 35
ISO 16505:2019/WD Amd 1
Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures — Amendment 1
20.00 ISO/TC 22/SC 35
ISO 16673:2007
Road vehicles — Ergonomic aspects of transport information and control systems — Occlusion method to assess visual demand due to the use of in-vehicle systems
95.99 ISO/TC 22/SC 39
ISO 16673:2017
Road vehicles — Ergonomic aspects of transport information and control systems — Occlusion method to assess visual demand due to the use of in-vehicle systems
60.60 ISO/TC 22/SC 39
ISO/TS 16951:2004
Road vehicles — Ergonomic aspects of transport information and control systems (TICS) — Procedures for determining priority of on-board messages presented to drivers
90.60 ISO/TC 22/SC 39
ISO/TR 16982:2002
Ergonomics of human-system interaction — Usability methods supporting human-centred design
90.93 ISO/TC 159/SC 4
ISO 17049:2013
Accessible design — Application of braille on signage, equipment and appliances
90.93 ISO/TC 173/SC 7
ISO 17069:2014
Accessible design — Consideration and assistive products for accessible meeting
60.60 ISO/TC 173/SC 7
ISO 17287:2003
Road vehicles — Ergonomic aspects of transport information and control systems — Procedure for assessing suitability for use while driving
90.93 ISO/TC 22/SC 39
ISO/CD 17842-4
Biomechanical effects on amusement ride passengers — Part 4: Biomechanical effects on amusement ride passengers
30.00 ISO/TC 254
ISO/TS 17929:2014
Biomechanical effects on amusement ride passengers
90.92 ISO/TC 254
ISO/PAS 18152:2003
Ergonomics of human-system interaction — Specification for the process assessment of human-system issues
95.99 ISO/TC 159/SC 4
ISO/TS 18152:2010
Ergonomics of human-system interaction — Specification for the process assessment of human-system issues
90.93 ISO/TC 159/SC 4
ISO/TR 18529:2000
Ergonomics — Ergonomics of human-system interaction — Human-centred lifecycle process descriptions
95.99 ISO/TC 159/SC 4
ISO 19026:2015
Accessible design — Shape and colour of a flushing button and a call button, and their arrangement with a paper dispenser installed on the wall in public restroom
60.60 ISO/TC 173/SC 7
ISO 19027:2016
Design principles for communication support board using pictorial symbols
60.60 ISO/TC 173/SC 7
ISO 19028:2016
Accessible design — Information contents, figuration and display methods of tactile guide maps
60.60 ISO/TC 173/SC 7
ISO 19029:2016
Accessible design — Auditory guiding signals in public facilities
60.60 ISO/TC 173/SC 7
ISO/TR 19358:2002
Ergonomics — Construction and application of tests for speech technology
90.93 ISO/TC 159/SC 5
ISO/TR 20278:2015
Unwanted reflections from the active and inactive areas of display surfaces visible during use
60.60 ISO/TC 159/SC 4
ISO 20282-1:2006
Ease of operation of everyday products — Part 1: Design requirements for context of use and user characteristics
90.93 ISO/TC 159/SC 4
ISO/PAS 20282-3:2007
Ease of operation of everyday products — Part 3: Test method for consumer products
95.99 ISO/TC 159/SC 4
ISO/PAS 20282-4:2007
Ease of operation of everyday products — Part 4: Test method for the installation of consumer products
95.99 ISO/TC 159/SC 4
ISO/TS 20282-2:2006
Ease of operation of everyday products — Part 2: Test method for walk-up-and-use products
95.99 ISO/TC 159/SC 4
ISO/TS 20282-2:2013
Usability of consumer products and products for public use — Part 2: Summative test method
90.93 ISO/TC 159/SC 4
ISO/IEC CD TR 20322.3
Information technology - Cross jurisdictional and societal aspects of implementation of biometric technologies - Biometrics and elderly people
30.60 ISO/IEC JTC 1/SC 37
ISO/TS 20646-1:2004
Ergonomic procedures for the improvement of local muscular workloads — Part 1: Guidelines for reducing local muscular workloads
95.99 ISO/TC 159/SC 3
ISO/TS 20646:2014
Ergonomics guidelines for the optimization of musculoskeletal workload
90.93 ISO/TC 159/SC 3
ISO 20685-1:2018
3-D scanning methodologies for internationally compatible anthropometric databases — Part 1: Evaluation protocol for body dimensions extracted from 3-D body scans
60.60 ISO/TC 159/SC 3
ISO 20685-2:2015
Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions
60.60 ISO/TC 159/SC 3
ISO 20685:2005
3-D scanning methodologies for internationally compatible anthropometric databases
95.99 ISO/TC 159/SC 3
ISO 20685:2010
3-D scanning methodologies for internationally compatible anthropometric databases
95.99 ISO/TC 159/SC 3
ISO/DTS 21054
Ergonomics — Accessible design — input controls of consumer products
30.20 ISO/TC 159/SC 4
ISO/TS 21144:2016
Ergonomics of human-system interaction — Electronic paper display — Indoor use
90.20 ISO/TC 159/SC 4
ISO/PRF 21956
Road vehicles — Ergonomics aspects of transport information and control systems — Human machine interface specifications for keyless ignition systems
50.20 ISO/TC 22/SC 39
ISO/TR 22100-3:2016
Safety of machinery — Relationship with ISO 12100 — Part 3: Implementation of ergonomic principles in safety standards
60.60 ISO/TC 199
ISO/DTR 23076
Ergonomics — Recovery Model for cyclical industrial work
30.60 ISO/TC 159/SC 3
ISO/DTR 23985
Readability of electronic paper displays (EPD)
30.99 ISO/TC 159/SC 4
ISO 24500:2010
Ergonomics — Accessible design — Auditory signals for consumer products
90.92 ISO/TC 159/SC 5
ISO 24501:2010
Ergonomics — Accessible design — Sound pressure levels of auditory signals for consumer products
90.60 ISO/TC 159/SC 5
ISO 24502:2010
Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light
90.60 ISO/TC 159/SC 5
ISO 24503:2011
Ergonomics — Accessible design — Tactile dots and bars on consumer products
90.60 ISO/TC 159/SC 4
ISO 24504:2014
Ergonomics — Accessible design — Sound pressure levels of spoken announcements for products and public address systems
90.20 ISO/TC 159/SC 5
ISO 24505:2016
Ergonomics — Accessible design — Method for creating colour combinations taking account of age-related changes in human colour vision
90.92 ISO/TC 159/SC 5
ISO/DIS 24505
Ergonomics — Accessible design — Method for creating colour combinations taking account of age-related changes in human colour vision
40.99 ISO/TC 159/SC 5
ISO/DIS 24507
Ergonomics — Accessible design — Doors and handles of consumer products
40.98 ISO/TC 159/SC 4
ISO/DTS 24507
Ergonomics — Accessible design — Doors and handles of consumer products
30.98 ISO/TC 159/SC 4
ISO 24508:2019
Ergonomics — Accessible design — Guidelines for designing tactile symbols and characters
60.60 ISO/TC 159/SC 4
ISO 24509
Ergonomics — Accessible design — A method for estimating minimum legible font size for people at any age
60.00 ISO/TC 159/SC 4
ISO/FDIS 24550
Ergonomics — Accessible design — Indicator lights on consumer products
50.20 ISO/TC 159/SC 4
ISO/FDIS 24551
Ergonomics — Accessible design — Spoken instructions of consumer products
50.20 ISO/TC 159/SC 4
ISO/DIS 24552
Ergonomics — Accessible design — Accessibility of information presented on visual displays of small consumer products
40.60 ISO/TC 159/SC 4
ISO 25065:2019
Systems and software engineering — Software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for Usability: User requirements specification
60.60 ISO/TC 159/SC 4
ISO 26022:2010
Road vehicles — Ergonomic aspects of transport information and control systems — Simulated lane change test to assess in-vehicle secondary task demand
90.93 ISO/TC 22/SC 39
ISO 26800:2011
Ergonomics — General approach, principles and concepts
90.93 ISO/TC 159/SC 1
ISO 27500:2016
The human-centred organization — Rationale and general principles
60.60 ISO/TC 159/SC 1
ISO 27501:2019
The human-centred organization — Guidance for managers
60.60 ISO/TC 159/SC 1
ISO 28802:2012
Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people
90.60 ISO/TC 159/SC 5
ISO 28803:2012
Ergonomics of the physical environment — Application of International Standards to people with special requirements
90.60 ISO/TC 159/SC 5
ISO/IEC TR 29194:2015
Information Technology — Biometrics — Guide on designing accessible and inclusive biometric systems
60.60 ISO/IEC JTC 1/SC 37

По запросу ничего не найдено