• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO 789-4:1986
Agricultural tractors — Test procedures — Part 4: Measurement of exhaust smoke
90.93 ISO/TC 23/SC 2
ISO 3173:1974
Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines operating under steady state conditions
95.99 ISO/TC 22
ISO 3929:1976
Road vehicles — Determination of exhaust carbon monoxide concentration at idle speed
95.99 ISO/TC 22
ISO 3929:1995
Road vehicles — Measurement methods for exhaust gas emissions produced during inspection or maintenance
95.99 ISO/TC 22
ISO 3929:2003
Road vehicles — Measurement methods for exhaust gas emissions during inspection or maintenance
90.93 ISO/TC 22/SC 34
ISO 3930:1976
Road vehicles — Carbon monoxide analyser equipment — Technical specifications
95.99 ISO/TC 22
ISO 3930:1993
Road vehicles — Measurement equipment for exhaust gas emissions during inspection or maintenance — Technical specifications
95.99 ISO/TC 22
ISO 3930:2000
Instruments for measuring vehicle exhaust emissions
95.99 ISO/TC 22
ISO 3930:2000/Amd 1:2004
Instruments for measuring vehicle exhaust emissions — Amendment 1
95.99 ISO/TC 22
ISO/PAS 3930:2009
Instruments for measuring vehicle exhaust emissions — Metrological and technical requirements; Metrological control and performance tests
95.99 ISO/TC 22/SC 34
ISO/TR 4011:1976
Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines
95.99 ISO/TC 22
ISO 6460-1:2007
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements
90.92 ISO/TC 22/SC 38
ISO 6460-1:2007/Amd 1:2015
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements — Amendment 1
60.60 ISO/TC 22/SC 38
ISO 6460-2:2007
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions
95.99 ISO/TC 22
ISO 6460-2:2014
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions
90.20 ISO/TC 22/SC 38
ISO 6460-3:2007
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed
90.93 ISO/TC 22/SC 38
ISO 6460-3:2007/Amd 1:2015
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed — Amendment 1
60.60 ISO/TC 22/SC 38
ISO 6460:1981
Road vehicles — Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ignition engine
95.99 ISO/TC 22
ISO/AWI 6460-1
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements
20.00 ISO/TC 22/SC 38
ISO 6855-1:2012
Mopeds — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements
90.93 ISO/TC 22/SC 38
ISO 6855-2:2012
Mopeds — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions
90.93 ISO/TC 22/SC 38
ISO 6855-3:2012
Mopeds — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed
90.93 ISO/TC 22/SC 38
ISO 6855:1983
Road vehicles — Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine
95.99 ISO/TC 22
ISO 6970:1994
Motorcycles and mopeds — Pollution tests — Chassis dynamometer bench
95.99 ISO/TC 22
ISO/TR 6970:1981
Road vehicles — Pollution tests for motorcycles and mopeds — Bench (chassis dynamometer)
95.99 ISO/TC 22
ISO 7644:1988
Road vehicles — Measurement of opacity of exhaust gas from compression-ignition (diesel) engines — Lug-down test
95.99 ISO/TC 22
ISO 7645:1988
Road vehicles — Measurement of opacity of exhaust gas from compression-ignition (diesel) engines — Steady single-speed test
95.99 ISO/TC 22
ISO 8178-10:2002
Reciprocating internal combustion engines — Exhaust emission measurement — Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
95.99 ISO/TC 70/SC 8
ISO 8178-11:2006
Reciprocating internal combustion engines — Exhaust emission measurement — Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
95.99 ISO/TC 70/SC 8
ISO 8178-1:1996
Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
95.99 ISO/TC 70/SC 8
ISO 8178-1:2006
Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
95.99 ISO/TC 70/SC 8
ISO 8178-1:2017
Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions
90.92 ISO/TC 70/SC 8
ISO 8178-1:2017/DAmd 1
Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions — Amendment 1: Update of certain instrument and measurement provisions and of the carbon flow check
40.98 ISO/TC 70/SC 8
ISO 8178-2:1996
Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions at site
95.99 ISO/TC 70/SC 8
ISO 8178-2:2008
Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
90.92 ISO/TC 70/SC 8
ISO 8178-3:1994
Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
95.99 ISO/TC 70/SC 8
ISO 8178-3:2019
Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
60.60 ISO/TC 70/SC 8
ISO 8178-4:1996
Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Test cycles for different engine applications
95.99 ISO/TC 70/SC 8
ISO 8178-4:2007
Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state test cycles for different engine applications
95.99 ISO/TC 70/SC 8
ISO 8178-4:2017
Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state and transient test cycles for different engine applications
90.92 ISO/TC 70/SC 8
ISO 8178-4:2017/DAmd 1
Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state and transient test cycles for different engine applications — Amendment 1: Update of data evaluation and calculation provisions, the molar based emission calculations and of the engine control area for E3 and E5 test cycle
40.98 ISO/TC 70/SC 8
ISO 8178-5:1997
Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
95.99 ISO/TC 70/SC 8
ISO 8178-5:2008
Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
95.99 ISO/TC 70/SC 8
ISO 8178-5:2015
Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
90.92 ISO/TC 70/SC 8
ISO 8178-6:2000
Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test
95.99 ISO/TC 70/SC 8
ISO 8178-6:2018
Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test
60.60 ISO/TC 70/SC 8
ISO 8178-7:1996
Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination
95.99 ISO/TC 70/SC 8
ISO 8178-7:2015
Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination
60.60 ISO/TC 70/SC 8
ISO 8178-8:1996
Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination
95.99 ISO/TC 70/SC 8
ISO 8178-8:2015
Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination
60.60 ISO/TC 70/SC 8
ISO 8178-9:2000
Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
95.99 ISO/TC 70/SC 8
ISO 8178-9:2000/Amd 1:2004
Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions — Amendment 1
95.99 ISO/TC 70/SC 8
ISO 8178-9:2012
Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
95.99 ISO/TC 70/SC 8
ISO 8178-9:2019
Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
60.60 ISO/TC 70/SC 8
ISO/DIS 8178-5
Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
40.99 ISO/TC 70/SC 8
ISO/FDIS 8178-1
Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions
50.00 ISO/TC 70/SC 8
ISO/FDIS 8178-4
Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state and transient test cycles for different engine applications
50.00 ISO/TC 70/SC 8
ISO/NP 8178-2
Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
10.99 ISO/TC 70/SC 8
ISO/TR 9310:1987
Road vehicles — Smoke measurement of compression-ignition (diesel) engines — Survey of short in-service tests
95.99 ISO/TC 22/SC 34
ISO 10054:1998
Internal combustion compression-ignition engines — Measurement apparatus for smoke from engines operating under steady-state conditions — Filter-type smokemeter
90.93 ISO/TC 22/SC 34
ISO 11614:1999
Reciprocating internal combustion compression-ignition engines — Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
90.93 ISO/TC 70/SC 8
ISO 15031-1:2001
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 1: General information
95.99 ISO/TC 22
ISO 15031-1:2010
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 1: General information and use case definition
90.93 ISO/TC 22/SC 31
ISO 15031-2:2010
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Guidance on terms, definitions, abbreviations and acronyms
90.93 ISO/TC 22/SC 31
ISO 15031-3:2004
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits, specification and use
95.99 ISO/TC 22/SC 31
ISO 15031-3:2016
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits: Specification and use
60.60 ISO/TC 22/SC 31
ISO 15031-4:2005
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment
95.99 ISO/TC 22
ISO 15031-4:2014
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment
90.93 ISO/TC 22/SC 31
ISO 15031-5:2006
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
95.99 ISO/TC 22
ISO 15031-5:2011
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
95.99 ISO/TC 22/SC 31
ISO 15031-5:2015
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
60.60 ISO/TC 22/SC 31
ISO 15031-6:2005
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions
95.99 ISO/TC 22
ISO 15031-6:2010
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions
95.99 ISO/TC 22/SC 31
ISO 15031-6:2015
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions
60.60 ISO/TC 22/SC 31
ISO 15031-7:2001
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 7: Data link security
95.99 ISO/TC 22
ISO 15031-7:2013
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 7: Data link security
90.93 ISO/TC 22/SC 31
ISO/TR 15031-2:2004
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Terms, definitions, abbreviations and acronyms
95.99 ISO/TC 22
ISO 16183:2002
Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
90.93 ISO/TC 22/SC 34
ISO 16232-10:2007
Road vehicles — Cleanliness of components of fluid circuits — Part 10: Expression of results
95.99 ISO/TC 22/SC 34
ISO 16232-1:2007
Road vehicles — Cleanliness of components of fluid circuits — Part 1: Vocabulary
95.99 ISO/TC 22/SC 34
ISO 16232-2:2007
Road vehicles — Cleanliness of components of fluid circuits — Part 2: Method of extraction of contaminants by agitation
95.99 ISO/TC 22/SC 34
ISO 16232-3:2007
Road vehicles — Cleanliness of components of fluid circuits — Part 3: Method of extraction of contaminants by pressure rinsing
95.99 ISO/TC 22/SC 34
ISO 16232-4:2007
Road vehicles — Cleanliness of components of fluid circuits — Part 4: Method of extraction of contaminants by ultrasonic techniques
95.99 ISO/TC 22/SC 34
ISO 16232-5:2007
Road vehicles — Cleanliness of components of fluid circuits — Part 5: Method of extraction of contaminants on functional test bench
95.99 ISO/TC 22/SC 34
ISO 16232-6:2007
Road vehicles — Cleanliness of components of fluid circuits — Part 6: Particle mass determination by gravimetric analysis
95.99 ISO/TC 22/SC 34
ISO 16232-7:2007
Road vehicles — Cleanliness of components of fluid circuits — Part 7: Particle sizing and counting by microscopic analysis
95.99 ISO/TC 22/SC 34
ISO 16232-8:2007
Road vehicles — Cleanliness of components of fluid circuits — Part 8: Particle nature determination by microscopic analysis
95.99 ISO/TC 22/SC 34
ISO 16232-9:2007
Road vehicles — Cleanliness of components of fluid circuits — Part 9: Particle sizing and counting by automatic light extinction particle counter
95.99 ISO/TC 22/SC 34
ISO 16232:2018
Road vehicles — Cleanliness of components and systems
60.60 ISO/TC 22/SC 34
ISO 17479:2013
Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance
90.93 ISO/TC 22/SC 38
ISO 17479:2013/DAmd 1
Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance — Amendment 1
40.20 ISO/TC 22/SC 38
ISO 18854:2015
Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions
60.60 ISO/TC 188
ISO 19449:2015
Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
60.60 ISO/TC 22/SC 38
ISO 21755-1:2019
Motorcycles — Measurement method for evaporative emissions — Part 1: SHED test procedure
60.60 ISO/TC 22/SC 38
ISO/DIS 21755-2
Motorcycles — Measurement method for evaporative emissions — Part 2: Measurement method by using permeation test procedure
40.60 ISO/TC 22/SC 38

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.