• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 131/SC 3 Секретариата Этап ICS
ISO 3320:1987
Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series
95.99
ISO 3320:2013
Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series
90.93
ISO 3321:1975
Fluid power systems and components — Cylinder bores and piston rod diameters — Inch series
95.99
ISO 3322:1985
Fluid power systems and components — Cylinders — Nominal pressures
95.99
ISO 4393:1978
Fluid power systems and components — Cylinders — Basic series of piston strokes
95.99
ISO 4393:2015
Fluid power systems and components — Cylinders — Basic series of piston strokes
60.60
ISO 4394-1:1980
Fluid power systems and components — Cylinder barrels — Part 1: Requirements for steel tubes with specially finished bores
95.99
ISO 4395:1978
Fluid power systems and components — Cylinders — Piston rod thread dimensions and types
95.99
ISO 4395:2009
Fluid power systems and components — Cylinder piston rod end types and dimensions
90.93
ISO 4395:2009/Cor 1:2010
Fluid power systems and components — Cylinder piston rod end types and dimensions — Technical Corrigendum 1
60.60
ISO 4400:1985
Fluid power systems and components — Three-pin electrical plug connector — Characteristics and requirements
95.99
ISO 6020-1:1981
Hydraulic fluid power — Single rod cylinders — Mounting dimensions — 160 bar (16 000 kPa) series — Part 1: Medium series
95.99
ISO 6020-1:1998
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1: Medium series
95.99
ISO 6020-1:2007
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1: Medium series
90.93
ISO 6020-2:1981
Hydraulic fluid power — Single rod cylinders — Mounting dimensions — 160 bar (16 000 kPa) series — Part 2: Compact series
95.99
ISO 6020-2:1991
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series
95.99
ISO 6020-2:2006
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series
95.99
ISO 6020-2:2006/Cor 1:2008
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series — Technical Corrigendum 1
95.99
ISO 6020-2:2015
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series
60.60
ISO 6020-3:1994
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm
95.99
ISO 6020-3:2015
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm
60.60
ISO 6022:1981
Hydraulic fluid power — Single rod cylinders — Mounting dimensions — 250 bar (25 000 kPa) series
95.99
ISO 6022:2006
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
90.93
ISO 6099:1982
Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
95.99
ISO 6099:1985
Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
95.99
ISO 6099:2001
Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
95.99
ISO 6099:2009
Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
95.99
ISO 6099:2018
Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
60.60
ISO 6430:1983
Pneumatic fluid power — Single rod cylinders with integral mountings — 10 bar (1 000 kPa) series — Bores from 32 to 250 mm — Mounting dimensions
95.99
ISO 6430:1992
Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, with integral mountings, bores from 32 mm to 250 mm — Mounting dimensions
95.99
ISO 6431:1983
Pneumatic fluid power — Single rod cylinders with detachable mountings — 10 bar (1 000 kPa) series — Bores from 32 to 320 mm — Mounting dimensions
95.99
ISO 6431:1992
Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm — Mounting dimensions
95.99
ISO 6432:1985
Pneumatic fluid power — Single rod cylinders — 10 bar (1 000 kPa) series — Bores from 8 to 25 mm — Mounting dimensions
95.99
ISO 6432:2015
Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm — Basic and mounting dimensions
60.60
ISO 6537:1982
Pneumatic fluid power systems — Cylinder barrels — Requirements for non-ferrous metallic tubes
90.93
ISO 6981:1982
Hydraulic fluid power — Cylinders — Rod end plain eyes — Mounting dimensions
95.99
ISO 6981:1992
Hydraulic fluid power — Cylinders — Rod end plain eyes — Mounting dimensions
95.99
ISO 6982:1982
Hydraulic fluid power — Cylinders — Rod end spherical eyes — Mounting dimensions
95.99
ISO 6982:1992
Hydraulic fluid power — Cylinders — Rod end spherical eyes — Mounting dimensions
95.99
ISO 7180:1986
Pneumatic fluid power — Cylinders — Bore and port thread sizes
95.99
ISO 7181:1982
Hydraulic fluid power — Cylinders — Bore and rod area ratios
95.99
ISO 7181:1991
Hydraulic fluid power — Cylinders — Bore and rod area ratios
95.99
ISO 8131:1986
Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) compact series — Tolerances
95.99
ISO 8131:1992
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Tolerances
95.99
ISO 8132:1986
Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series — Mounting dimensions for accessories
95.99
ISO 8132:2006
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series — Mounting dimensions for accessories
95.99
ISO 8132:2014
Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
90.20
ISO 8133:1991
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Accessory mounting dimensions
95.99
ISO 8133:2006
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Mounting dimensions for accessories
95.99
ISO 8133:2014
Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
90.20
ISO 8135:1986
Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series — Tolerances
95.99
ISO 8135:1999
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series — Tolerances
95.99
ISO 8136:1986
Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) medium series — Port dimensions
95.99
ISO 8137:1986
Hydraulic fluid power — Single rod cylinders, 250 bar (25 MPa) series — Port dimensions
95.99
ISO 8138:1986
Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) compact series — Port dimensions
95.99
ISO 8138:1998
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Port dimensions
95.99
ISO 8139:1986
Pneumatic fluid power — Cylinders, 10 bar (1 000 kPa) series — Rod end spherical eyes — Mounting dimensions
95.99
ISO 8139:1991
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Rod end spherical eyes — Mounting dimensions
95.99
ISO 8139:2009
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end spherical eyes
95.99
ISO 8139:2018
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end spherical eyes
60.60
ISO 8140:1986
Pneumatic fluid power — Cylinders, 10 bar (1 000 kPa) series — Rod end clevis — Mounting dimensions
95.99
ISO 8140:1991
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Rod end clevis — Mounting dimensions
95.99
ISO 8140:2009
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end clevises
95.99
ISO 8140:2018
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end clevises
60.60
ISO 10099:1990
Pneumatic fluid power — Cylinders — Acceptance test
95.99
ISO 10099:2001
Pneumatic fluid power — Cylinders — Final examination and acceptance criteria
90.93
ISO 10100:1990
Hydraulic fluid power — Cylinders — Acceptance test
95.99
ISO 10100:2001
Hydraulic fluid power — Cylinders — Acceptance tests
90.92
ISO 10100:2001/Amd 1:2012
Hydraulic fluid power — Cylinders — Acceptance tests — Amendment 1
60.60
ISO/DIS 10100
Hydraulic fluid power — Cylinders — Acceptance tests
40.60
ISO 10762:1997
Hydraulic fluid power — Cylinder mounting dimensions — 10 MPa (100 bar) series
95.99
ISO 10762:2015
Hydraulic fluid power — Mounting dimensions for cylinders, 10 MPa (100 bar) series
60.60
ISO/TS 13725:2001
Hydraulic fluid power — Cylinders — Method for determining the buckling load
95.99
ISO/TS 13725:2016
Hydraulic fluid power — Method for evaluating the buckling load of a hydraulic cylinder
90.60
ISO 13726:1998
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions
95.99
ISO 13726:2008
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions
90.93
ISO 15524:2011
Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm
90.93
ISO 15552:2004
Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions
95.99
ISO 15552:2018
Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions
60.60
ISO 16656:2004
Hydraulic fluid power — Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) — Mounting dimensions
95.99
ISO 16656:2016
Hydraulic fluid power — Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) — Mounting dimensions
60.60
ISO/TR 16806:2003
Pneumatic fluid power — Cylinders — Load capacity of pneumatic slides and their presentation method
95.99
ISO 21287:2004
Pneumatic fluid power — Cylinders — Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
90.93

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.