• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 33 Секретариата Этап ICS
ISO/R 475:1966
Dimensions of rectangular refractory bricks
95.99
ISO 528:1983
Refractory products — Determination of pyrometric cone equivalent (refractoriness)
90.20
ISO 836:2001
Terminology for refractories
90.93
ISO/R 836:1968
Vocabulary for the refractories industry
95.99
ISO 1109:1975
Refractory products — Classification of dense shaped refractory products
95.99
ISO/R 1145:1969
Dimensions of refractory arch bricks
95.99
ISO 1146:1988
Pyrometric reference cones for laboratory use — Specification
90.20
ISO/R 1146:1969
Pyrometric reference cones
95.99
ISO 1893:1989
Refractory products — Determination of refractoriness-under-load (differential - with rising temperature)
95.99
ISO 1893:2005
Refractory products — Determination of refractoriness-under-load — Differential method with rising temperature
95.99
ISO 1893:2007
Refractory products — Determination of refractoriness under load — Differential method with rising temperature
90.93
ISO/R 1893:1970
Refractory products — Determination of refractoriness under load (Differential — With rising temperature)
95.99
ISO 1927-1:2012
Monolithic (unshaped) refractory products — Part 1: Introduction and classification
90.93
ISO 1927-2:2012
Monolithic (unshaped) refractory products — Part 2: Sampling for testing
90.93
ISO 1927-3:2012
Monolithic (unshaped) refractory products — Part 3: Characterization as received
90.93
ISO 1927-4:2012
Monolithic (unshaped) refractory products — Part 4: Determination of consistency of castables
90.93
ISO 1927-5:2012
Monolithic (unshaped) refractory products — Part 5: Preparation and treatment of test pieces
90.93
ISO 1927-6:2012
Monolithic (unshaped) refractory products — Part 6: Measurement of physical properties
90.93
ISO 1927-7:2012
Monolithic (unshaped) refractory products — Part 7: Tests on pre-formed shapes
90.93
ISO 1927-8:2012
Monolithic (unshaped) refractory products — Part 8: Determination of complementary properties
90.93
ISO 1927:1975
Refractory products — Classification of prepared unshaped refractory materials (dense and insulating)
95.99
ISO 1927:1984
Prepared unshaped refractory materials (dense and insulating) — Classification
95.99
ISO 2245:1972
Shaped insulating refractory products — Classification
95.99
ISO 2245:1990
Shaped insulating refractory products — Classification
95.99
ISO 2245:2006
Shaped insulating refractory products — Classification
90.93
ISO 2246:1972
Dense shaped refractory products — Nomenclature of manufacturing processes
95.99
ISO 2477:1973
Shaped insulating refractory products — Determination of the permanent change in dimensions on heating
95.99
ISO 2477:1987
Shaped insulating refractory products — Determination of permanent change in dimensions on heating
95.99
ISO 2477:2005
Shaped insulating refractory products — Determination of permanent change in dimensions on heating
90.93
ISO 2478:1973
Dense shaped refractory products — Determination of the permanent changes in dimensions on heating
95.99
ISO 2478:1987
Dense shaped refractory products — Determination of permanent change in dimensions on heating
90.93
ISO 3187:1989
Refractory products — Determination of creep in compression
90.93
ISO 5013:1985
Refractory products — Determination of modulus of rupture at elevated temperatures
90.93
ISO 5014:1986
Refractory products — Determination of modulus of rupture at ambient temperature
95.99
ISO 5014:1997
Dense and insulating shaped refractory products — Determination of modulus of rupture at ambient temperature
90.93
ISO 5016:1986
Shaped insulating refractory products — Determination of bulk density and true porosity
95.99
ISO 5016:1997
Shaped insulating refractory products — Determination of bulk density and true porosity
90.93
ISO 5017:1988
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
95.99
ISO 5017:1998
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
95.99
ISO 5017:2013
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
90.93
ISO 5018:1983
Refractory materials — Determination of true density
90.20
ISO 5019-1:1984
Refractory bricks — Dimensions — Part 1: Rectangular bricks
90.20
ISO 5019-2:1984
Refractory bricks — Dimensions — Part 2: Arch bricks
90.20
ISO 5019-3:1984
Refractory bricks — Dimensions — Part 3: Rectangular checker bricks for regenerative furnaces
90.20
ISO 5019-4:1984
Refractory bricks — Dimensions — Part 4: Dome bricks for electric arc furnace roofs
95.99
ISO 5019-4:1988
Refractory bricks — Dimensions — Part 4: Dome bricks for electric arc furnace roofs
90.20
ISO 5019-5:1984
Refractory bricks — Dimensions — Part 5: Skewbacks
90.20
ISO 5019-6:1984
Refractory bricks — Dimensions — Part 6: Basic bricks for oxygen steel-making converters
95.99
ISO 5019-6:2005
Refractory bricks — Dimensions — Part 6: Basic bricks for oxygen steel-making converters
90.20
ISO 5022:1979
Shaped refractory products — Sampling and acceptance testing
90.93
ISO 5417:1986
Refractory bricks for use in rotary kilns — Dimensions
90.93
ISO 8656-1:1988
Refractory products — Sampling of raw materials and unshaped products — Part 1: Sampling scheme
90.20
ISO 8840:1987
Refractory materials — Determination of bulk density of granular materials (grain density)
90.92
ISO/AWI 8840
Refractory materials — Determination of bulk density of granular materials (grain density)
20.00
ISO 8841:1991
Dense, shaped refractory products — Determination of permeability to gases
90.93
ISO 8890:1988
Dense shaped refractory products — Determination of resistance to sulfuric acid
90.20
ISO 8894-1:1987
Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire method (cross-array)
95.99
ISO 8894-1:2010
Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods (cross-array and resistance thermometer)
90.93
ISO 8894-2:1990
Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method (parallel)
95.99
ISO 8894-2:2007
Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method (parallel)
90.93
ISO 8895:1986
Shaped insulating refractory products — Determination of cold crushing strength
95.99
ISO 8895:2004
Shaped insulating refractory products — Determination of cold crushing strength
90.93
ISO 9205:1988
Refractory bricks for use in rotary kilns — Hot-face identification marking
90.20
ISO 10058-1:2008
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
90.93
ISO 10058-2:2008
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
90.93
ISO 10058-3:2008
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
90.93
ISO 10058:1992
Magnesites and dolomites — Chemical analysis
95.99
ISO 10059-1:1992
Dense, shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing
90.93
ISO 10059-2:2003
Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
90.20
ISO 10060:1993
Dense, shaped refractory products — Test methods for products containing carbon
90.20
ISO 10080:1990
Refractory products — Classification of dense, shaped acid-resisting products
90.93
ISO 10081-1:1991
Basic refractory products — Classification — Part 1: Products containing less than 7 % residual carbon
95.99
ISO 10081-1:2003
Classification of dense shaped refractory products — Part 1: Alumina-silica
90.20
ISO 10081-2:2003
Classification of dense shaped refractory products — Part 2: Basic products containing less than 7 % residual carbon
90.20
ISO 10081-2:2003/Cor 1:2008
Classification of dense shaped refractory products — Part 2: Basic products containing less than 7 % residual carbon — Technical Corrigendum 1
60.60
ISO 10081-3:2003
Classification of dense shaped refractory products — Part 3: Basic products containing from 7 % to 50 % residual carbon
90.20
ISO 10081-4:2007
Classification of dense shaped refractory products — Part 4: Special products
95.99
ISO 10081-4:2014
Classification of dense shaped refractory products — Part 4: Special products
90.20
ISO 10635:1999
Refractory products — Methods of test for ceramic fibre products
90.93
ISO 12676:2000
Refractory products — Determination of resistance to carbon monoxide
90.93
ISO 12677:2003
Chemical analysis of refractory products by XRF — Fused cast bead method
95.99
ISO 12677:2011
Chemical analysis of refractory products by X-ray fluorescence (XRF) — Fused cast-bead method
90.93
ISO 12678-1:1996
Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 1: Dimensions and conformity to drawings
90.93
ISO 12678-2:1996
Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 2: Corner and edge defects and other surface imperfections
90.93
ISO 12680-1:2005
Methods of test for refractory products — Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration
90.93
ISO 13765-1:2004
Refractory mortars — Part 1: Determination of consistency using the penetrating cone method
90.93
ISO 13765-2:2004
Refractory mortars — Part 2: Determination of consistency using the reciprocating flow table method
90.93
ISO 13765-3:2004
Refractory mortars — Part 3: Determination of joint stability
90.93
ISO 13765-4:2004
Refractory mortars — Part 4: Determination of flexural bonding strength
90.93
ISO 13765-5:2004
Refractory mortars — Part 5: Determination of grain size distribution (sieve analysis)
90.93
ISO 13765-6:2004
Refractory mortars — Part 6: Determination of moisture content of ready-mixed mortars
90.93
ISO/DIS 13765-7
Refractory mortars — Part 7: Determination of permanent change in dimensions on heating
40.92
ISO 14719:2011
Chemical analysis of refractory material glass and glazes — Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline
90.93
ISO 14720-1:2013
Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 1: Infrared measurement methods
90.93
ISO 14720-2:2013
Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
90.93
ISO 16169:2018
Preparation of silicon carbide and similar materials for analysis by ISO 12677 X-ray fluorescence (XRF) — Fused cast-bead method
60.60
ISO 16282:2007
Methods of test for dense shaped refractory products — Determination of resistance to abrasion at ambient temperature
90.93
ISO 16334:2013
Monolithic refractory products — Determination of resistance to explosive spalling
90.93
ISO 16349:2015
Refractory materials — Determination of abrasion resistance at elevated temperature
60.60
ISO 16835:2014
Refractory products — Determination of thermal expansion
90.93
ISO 18886:2016
Refractory test-piece preparation — Gunning refractory panels by wet gunning techniques
60.60
ISO 20182:2005
Refractory test piece preparation — Gunning refractory panels by the pneumatic-nozzle mixing type guns
95.99
ISO 20182:2008
Refractory test-piece preparation — Gunning refractory panels by the pneumatic-nozzle mixing type guns
90.93
ISO 20565-1:2008
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
90.93
ISO 20565-2:2008
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
90.93
ISO 20565-3:2008
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
90.93
ISO 21068-1:2008
Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 1: General information and sample preparation
90.93
ISO 21068-2:2008
Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon
90.93
ISO 21068-3:2008
Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
90.93
ISO 21078-1:2008
Determination of boron (III) oxide in refractory products — Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes
90.93
ISO 21078-2:2006
Determination of boron(III) oxide in refractory products — Part 2: Acid extraction method for the determination of boron(III) oxide in binder components
90.93
ISO 21079-1:2008
Chemical analysis of refractories containing alumina, zirconia and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents and dissolution
90.93
ISO 21079-2:2008
Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
90.93
ISO 21079-3:2008
Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP -AES)
90.93
ISO 21587-1:2007
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and gravimetric silica
90.93
ISO 21587-2:2007
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
90.93
ISO 21587-3:2007
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) — Part 3: Inductively coupled plasma and atomic absorption spectrometry methods
90.93
ISO/DIS 21736
Refractories — Test methods for thermal shock resistance
40.20
ISO/TR 21828:2010
Guidance on standards available for preparation and testing of monolithic, unshaped refractory products
60.60
ISO 22016:2015
Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods
60.60
ISO/DIS 22605
Refractories — Determination of dynamic Young’s modulus(MOE) at elevated temperatures by impulse excitation of vibration
40.20
ISO/CD 23071
Refractory products — Determination of reduced species in carbon containing refractories by XRD
30.60
ISO 26845:2008
Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
90.93

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.