Standards catalogue

93.025 - External water conveyance systems Including buried and above ground installations

Pipelines and its parts for external water conveyance systems, see 23.040.03
Water supply systems, see 91.140.60
  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 559:1991
Steel tubes for water and sewage
90.20 ISO/TC 5/SC 1
ISO 1452-1:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General
90.93 ISO/TC 138/SC 2
ISO 1452-2:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 1452-3:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 1452-4:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves
90.93 ISO/TC 138/SC 2
ISO 1452-5:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO 3114:1977
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -- Test method
90.93 ISO/TC 138/SC 5
ISO/TR 4191:1989 [Withdrawn]
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply -- Recommended practice for laying
95.99 ISO/TC 138/SC 2
ISO/TR 4191:2014
Plastics piping systems for water supply -- Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) -- Guidance for installation
60.60 ISO/TC 138/SC 2
ISO 4422-1:1996 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 1: General
95.99 ISO/TC 138/SC 2
ISO 4422-2:1996 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 2: Pipes (with or without integral sockets)
95.99 ISO/TC 138/SC 2
ISO 4422-3:1996 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 3: Fittings and joints
95.99 ISO/TC 138/SC 2
ISO 4422-4:1997 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 4: Valves and ancillary equipment
95.99 ISO/TC 138/SC 2
ISO 4422-5:1997 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 4427:1996 [Withdrawn]
Polyethylene (PE) pipes for water supply -- Specifications
95.99 ISO/TC 138/SC 2
ISO 4427-1:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General
90.92 ISO/TC 138/SC 2
ISO 4427-1:2007/Amd 1:2015
Melt mass-flow rate (MFR) for PE 80 and PE 100
60.60 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO/NP 4427-1 [Under development]
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General
10.99 ISO/TC 138/SC 2
ISO 4427-2:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 2: Pipes
90.92 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO/NP 4427-2 [Under development]
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 2: Pipes
10.99 ISO/TC 138/SC 2
ISO 4427-3:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings
90.92 ISO/TC 138/SC 2
ISO/NP 4427-3 [Under development]
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings
10.99 ISO/TC 138/SC 2
ISO 4427-5:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system
90.92 ISO/TC 138/SC 2
ISO/NP 4427-5 [Under development]
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system
10.99 ISO/TC 138/SC 2
ISO 6600:1980 [Withdrawn]
Ductile iron pipes -- Centrifugal cement mortar lining -- Composition controls of freshly applied mortar
95.99 ISO/TC 5/SC 2
ISO 6992:1986 [Withdrawn]
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply -- Extractability of cadmium and mercury occurring as impurities
95.99 ISO/TC 138/SC 5
ISO 8795:2001
Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints
90.20 ISO/TC 138/SC 5
ISO 9349:1991 [Withdrawn]
Preinsulated ductile iron pipeline systems
95.99 ISO/TC 5/SC 2
ISO 9349:2004 [Withdrawn]
Preinsulated ductile iron pipeline systems
95.99 ISO/TC 5/SC 2
ISO 9349:2017
Ductile iron pipes, fittings, accessories and their joints -- Thermal preinsulated products
60.60 ISO/TC 5/SC 2
ISO 10639:2004 [Withdrawn]
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
95.99 ISO/TC 138/SC 6
95.99 ISO/TC 138/SC 6
ISO 10639:2017
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
60.60 ISO/TC 138/SC 6
ISO 11298-1:2010
Plastics piping systems for renovation of underground water supply networks -- Part 1: General
90.92 ISO/TC 138/SC 8
ISO/PRF 11298-1 [Under development]
Plastics piping systems for renovation of underground water supply networks -- Part 1: General
50.00 ISO/TC 138/SC 8
ISO 11298-2 [Under development]
Plastics piping systems for renovation of underground water supply networks -- Part 2: Lining with continuous pipes
60.00 ISO/TC 138/SC 8
ISO 11298-3:2010
Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit pipes
90.92 ISO/TC 138/SC 8
ISO/DIS 11298-3 [Under development]
Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit pipes
40.60 ISO/TC 138/SC 8
ISO/DIS 20325 [Under development]
Service activities relating to drinking water supply and wastewater systems -- Stormwater management -- Guidelines for stormwater management in urban areas
40.00 ISO/TC 224
ISO 21004:2006
Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply
90.93 ISO/TC 138/SC 2
ISO 21307 [Under development]
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) piping systems
60.00 ISO/TC 138/SC 4
ISO 21307:2009 [Withdrawn]
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
95.99 ISO/TC 138/SC 4
ISO 21307:2011
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
90.92 ISO/TC 138/SC 4
ISO 22391-1:2007 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General
95.99 ISO/TC 138/SC 2
ISO 22391-1:2009
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General
90.93 ISO/TC 138/SC 2
ISO 22391-2:2007 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes
95.99 ISO/TC 138/SC 2
ISO 22391-2:2009
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 22391-3:2007 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 22391-3:2009
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 22391-5:2007 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 22391-5:2009
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO/CD TS 22391-7 [Under development]
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 7: Guidance for the assessment of conformity
30.00 ISO/TC 138/SC 2
ISO/TS 22391-7:2011
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 7: Guidance for the assessment of conformity
90.92 ISO/TC 138/SC 2
ISO 24512:2007
Activities relating to drinking water and wastewater services -- Guidelines for the management of drinking water utilities and for the assessment of drinking water services
90.93 ISO/TC 224

No matching records found