Standards catalogue

91.140.80 - Drainage systems

Sewage water, see 13.060.30
Roofs, see 91.060.20
External sewage systems, see 93.030
  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO/R 265:1962 [Withdrawn]
Pipes and fittings of plastics materials -- Socket fittings with spigot ends for domestic and industrial waste pipes -- Basic dimensions : Metric series
95.99 ISO/TC 138
ISO 265-1:1988
Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
90.93 ISO/TC 138/SC 1
ISO 391:1982 [Withdrawn]
Building and sanitary pipes in asbestos-cement
95.99 ISO/TC 77
ISO 392:1986 [Withdrawn]
Asbestos-cement pipe fittings for building and sanitary purposes
95.99 ISO/TC 77
ISO/R 392:1964 [Withdrawn]
Asbestos-cement pipe fittings for building and sanitary purposes
95.99 ISO/TC 77
ISO 559:1977 [Withdrawn]
Welded or seamless steel tubes for water, sewage and gas
95.99 ISO/TC 5
ISO 559:1991
Steel tubes for water and sewage
90.20 ISO/TC 5/SC 1
ISO 881:1980 [Withdrawn]
Asbestos-cement pipes, joints and fittings for sewerage and drainage
95.99 ISO/TC 77
ISO 3633:1991 [Withdrawn]
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings -- Specifications
95.99 ISO/TC 138/SC 1
ISO 3633:2002
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Unplasticized poly(vinyl chloride) (PVC-U)
90.93 ISO/TC 138/SC 1
ISO 4633:1983 [Withdrawn]
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:1996 [Withdrawn]
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:2002 [Withdrawn]
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:2015
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
60.60 ISO/TC 45/SC 4
ISO 6594:1983 [Withdrawn]
Cast iron drainage pipes and fittings -- Spigot series
95.99 ISO/TC 5/SC 2
ISO 6594:2006
Cast iron drainage pipes and fittings -- Spigot series
90.93 ISO/TC 5/SC 2
ISO/TR 7024:1985 [Withdrawn]
Above-ground drainage -- Recommended practice and techniques for the installation of unplasticized polyvinyl chloride (PVC-U) sanitary pipework for above-ground systems inside buildings
95.99 ISO/TC 138/SC 1
ISO/TS 7024:2005
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Thermoplastics -- Recommended practice for installation
90.60 ISO/TC 138/SC 1
ISO/TR 7073:1988 [Withdrawn]
Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers
95.99 ISO/TC 138/SC 1
ISO/TR 7074:1986 [Withdrawn]
Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
95.99 ISO/TC 138/SC 1
ISO 7186:1983 [Withdrawn]
Ductile iron pipes and accessories for non-pressure pipe-lines
95.99 ISO/TC 5/SC 2
ISO 7671:1991 [Withdrawn]
Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings -- Specifications
95.99 ISO/TC 138/SC 1
ISO 7671:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polypropylene (PP)
90.93 ISO/TC 138/SC 1
ISO 7675:1991 [Withdrawn]
Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings -- Specifications
95.99 ISO/TC 138/SC 1
ISO 7675:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Chlorinated poly(vinyl chloride) (PVC-C)
90.93 ISO/TC 138/SC 1
ISO 7682:1991 [Withdrawn]
Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings -- Specifications
95.99 ISO/TC 138/SC 1
ISO 7682:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Acrylonitrile-butadiene-styrene (ABS)
90.93 ISO/TC 138/SC 1
ISO 8283-1:1991
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
90.93 ISO/TC 138/SC 1
ISO 8283-2:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 2: Polyethylene (PE)
90.93 ISO/TC 138/SC 1
ISO 8283-3:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 3: Polypropylene (PP)
90.93 ISO/TC 138/SC 1
ISO 8283-4:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS)
90.93 ISO/TC 138/SC 1
ISO 8770:1991 [Withdrawn]
High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings -- Specifications
95.99 ISO/TC 138/SC 1
ISO 8770:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polyethylene (PE)
90.93 ISO/TC 138/SC 1
ISO 8772:1991 [Withdrawn]
High-density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems -- Specifications
95.99 ISO/TC 138/SC 1
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE)
90.93 ISO/TC 138/SC 1
ISO 8773:1991 [Withdrawn]
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems -- Specifications
95.99 ISO/TC 138/SC 1
ISO 8773:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP)
90.93 ISO/TC 138/SC 1
ISO 9896:1996
Plastics traps for discharge pipework systems inside buildings
90.93 ISO/TC 138/SC 1
ISO 10467:2004
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
90.92 ISO/TC 138/SC 6
60.60 ISO/TC 138/SC 6
ISO/DIS 10467 [Under development]
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
40.93 ISO/TC 138/SC 6
ISO 11296-1:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General
90.92 ISO/TC 138/SC 8
ISO/PRF 11296-1 [Under development]
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General
50.00 ISO/TC 138/SC 8
ISO 11296-2 [Under development]
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 2: Lining with continuous pipes
60.00 ISO/TC 138/SC 8
ISO 11296-3:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes
90.92 ISO/TC 138/SC 8
60.60 ISO/TC 138/SC 8
ISO/DIS 11296-3 [Under development]
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes
40.60 ISO/TC 138/SC 8
ISO 11296-4:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-place pipes
90.92 ISO/TC 138/SC 8
ISO/FDIS 11296-4 [Under development]
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-place pipes
50.20 ISO/TC 138/SC 8
ISO 11296-7:2011
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes
90.92 ISO/TC 138/SC 8
ISO/DIS 11296-7 [Under development]
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes
40.00 ISO/TC 138/SC 8
ISO 11297-1:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General
90.92 ISO/TC 138/SC 8
ISO/PRF 11297-1 [Under development]
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General
50.00 ISO/TC 138/SC 8
ISO 11297-2 [Under development]
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 2: Lining with continuous pipes
60.00 ISO/TC 138/SC 8
ISO 11297-3:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 3: Lining with close-fit pipes
90.92 ISO/TC 138/SC 8
ISO/DIS 11297-3 [Under development]
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 3: Lining with close-fit pipes
40.60 ISO/TC 138/SC 8
ISO/FDIS 11297-4 [Under development]
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 4: Lining with cured-in-place pipes
50.20 ISO/TC 138/SC 8
ISO 13229:2010
Thermoplastics piping systems for non-pressure applications -- Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings -- Determination of the viscosity number and K-value
90.93 ISO/TC 138/SC 1
ISO 13254:2010
Thermoplastics piping systems for non-pressure applications -- Test method for watertightness
90.93 ISO/TC 138/SC 1
ISO 13255:2010
Thermoplastics piping systems for soil and waste discharge inside buildings -- Test method for airtightness of joints
90.93 ISO/TC 138/SC 1
ISO 13257:2010
Thermoplastics piping systems for non-pressure applications -- Test method for resistance to elevated temperature cycling
90.92 ISO/TC 138/SC 1
ISO/CD 13257 [Under development]
Thermoplastics piping systems for non-pressure applications -- Test method for resistance to elevated temperature cycling
30.99 ISO/TC 138/SC 1
ISO 13259:2010
Thermoplastics piping systems for underground non-pressure applications -- Test method for leaktightness of elastomeric sealing ring type joints
90.92 ISO/TC 138/SC 1
ISO/DIS 13259 [Under development]
Thermoplastics piping systems for underground non-pressure applications -- Test method for leaktightness of elastomeric sealing ring type joints
40.99 ISO/TC 138/SC 1
ISO 13260:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading
90.93 ISO/TC 138/SC 1
60.60 ISO/TC 138/SC 1
ISO 13262:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam
90.93 ISO/TC 138/SC 1
ISO 13263:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength
90.93 ISO/TC 138/SC 1
ISO 13264:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings
90.93 ISO/TC 138/SC 1
ISO 13265:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
90.93 ISO/TC 138/SC 1
ISO 13266:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading
90.93 ISO/TC 138/SC 1
ISO 13267:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test methods for buckling resistance
90.93 ISO/TC 138/SC 1
ISO 13268:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness
90.93 ISO/TC 138/SC 1
ISO 13272:2011
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations
90.93 ISO/TC 138/SC 1
ISO 16611:2017
Plastics piping systems for drainage and sewerage without pressure -- Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) -- Dimensions, requirements and tests
60.60 ISO/TC 138/SC 6
ISO 18672-1:2009
Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints
90.93 ISO/TC 138/SC 6
ISO 19220:2004
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Styrene copolymer blends (SAN + PVC)
90.93 ISO/TC 138/SC 1
ISO/DIS 19469-1.2 [Under development]
Plastic piping systems for non pressure underground drainage - Single wall corrugated piping systems of polyethylene (PE) and polypropylene (PP) -- Part 1: General requirements and performance characteristics
40.20 ISO/TC 138/SC 1
ISO/DIS 19469-3.2 [Under development]
Plastic piping systems for non pressure underground drainage - Single wall corrugated piping systems of polyethylene (PE) and polypropylene (PP) -- Part 3: Pipes and fittings
40.20 ISO/TC 138/SC 1
ISO 21138-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system
90.92 ISO/TC 138/SC 1
ISO/CD 21138-1 [Under development]
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system
30.60 ISO/TC 138/SC 1
ISO 21138-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A
90.92 ISO/TC 138/SC 1
ISO/DIS 21138-2 [Under development]
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A
40.60 ISO/TC 138/SC 1
ISO 21138-3:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B
90.92 ISO/TC 138/SC 1
ISO/DIS 21138-3 [Under development]
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B
40.60 ISO/TC 138/SC 1
ISO/FDIS 21225-1 [Under development]
Plastics piping systems for the trenchless replacement of underground pipeline networks -- Part 1: Replacement on the line by pipe bursting and pipe extraction
50.00 ISO/TC 138/SC 8
ISO/FDIS 21225-2 [Under development]
Plastics piping systems for the trenchless replacement of underground pipeline networks -- Part 2: Replacement off the line by horizontal directional drilling and impact moling
50.00 ISO/TC 138/SC 8
ISO 22306:2007 [Withdrawn]
Fibre-reinforced cement pipe, joints and fittings for gravity systems
95.99 ISO/TC 77
ISO 23711:2003
Elastomeric seals -- Requirements for materials for pipe joint seals used in water and drainage applications -- Thermoplastic elastomers
90.93 ISO/TC 45/SC 4
ISO 25780:2011
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques
90.92 ISO/TC 138/SC 6

No matching records found