Standards catalogue

91.140.60 - Water supply systems Including water meters in buildings

Pipelines and its parts for external water conveyance systems, see 23.040.03
External water conveyance systems, see 93.025
  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 559:1977 [Withdrawn]
Welded or seamless steel tubes for water, sewage and gas
95.99 ISO/TC 5
ISO 559:1991
Steel tubes for water and sewage
90.20 ISO/TC 5/SC 1
ISO 1452-1:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General
90.93 ISO/TC 138/SC 2
ISO 1452-2:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 1452-3:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 1452-4:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves
90.93 ISO/TC 138/SC 2
ISO 1452-5:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO 2531:1998 [Withdrawn]
Ductile iron pipes, fittings, accessories and their joints for water or gas applications
95.99 ISO/TC 5/SC 2
ISO 2531:2009
Ductile iron pipes, fittings, accessories and their joints for water applications
90.93 ISO/TC 5/SC 2
60.60 ISO/TC 5/SC 2
ISO 3114:1977
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -- Test method
90.93 ISO/TC 138/SC 5
ISO 3822-1:1983 [Withdrawn]
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 1: Method of measurement
95.99 ISO/TC 43/SC 2
ISO 3822-1:1999
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 1: Method of measurement
90.93 ISO/TC 43/SC 2
ISO 3822-1:1999/Amd 1:2008
Measurement uncertainty
60.60 ISO/TC 43/SC 2
ISO 3822-2:1984 [Withdrawn]
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps
95.99 ISO/TC 43/SC 2
ISO 3822-2:1995
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps and mixing valves
90.93 ISO/TC 43/SC 2
ISO 3822-3:1984 [Withdrawn]
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for in-line valves and appliances
95.99 ISO/TC 43/SC 2
ISO 3822-3:1997
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for in-line valves and appliances
90.92 ISO/TC 43/SC 2
60.60 ISO/TC 43/SC 2
ISO/FDIS 3822-3 [Under development]
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for in-line valves and appliances
50.20 ISO/TC 43/SC 2
ISO 3822-4:1985 [Withdrawn]
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 4: Mounting and operating conditions for special appliances
95.99 ISO/TC 43/SC 2
ISO 3822-4:1997
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 4: Mounting and operating conditions for special appliances
90.93 ISO/TC 43/SC 2
ISO 4064-1:1977 [Withdrawn]
Measurement of water flow in closed conduits -- Meters for cold potable water -- Part 1: Specification
95.99 ISO/TC 30
ISO 4064-1:1993 [Withdrawn]
Measurement of water flow in closed conduits -- Meters for cold potable water -- Part 1: Specifications
95.99 ISO/TC 30/SC 7
ISO 4064-1:2005 [Withdrawn]
Measurement of water flow in fully charged closed conduits -- Meters for cold potable water and hot water -- Part 1: Specifications
95.99 ISO/TC 30/SC 7
ISO 4064-1:2014
Water meters for cold potable water and hot water -- Part 1: Metrological and technical requirements
60.60 ISO/TC 30/SC 7
ISO 4064-2:1978 [Withdrawn]
Measurement of water flow in closed conduits -- Meters for cold potable water -- Part 2: Installation requirements
95.99 ISO/TC 30/SC 7
ISO 4064-2:1978/Add 1:1983 [Withdrawn]
Parallel and multiple meter operation
95.99 ISO/TC 30
ISO 4064-2:2001 [Withdrawn]
Measurement of water flow in closed conduits -- Meters for cold potable water -- Part 2: Installation requirements and selection
95.99 ISO/TC 30/SC 7
ISO 4064-2:2005 [Withdrawn]
Measurement of water flow in fully charged closed conduits -- Meters for cold potable water and hot water -- Part 2: Installation requirements
95.99 ISO/TC 30/SC 7
ISO 4064-2:2014
Water meters for cold potable water and hot water -- Part 2: Test methods
60.60 ISO/TC 30/SC 7
ISO 4064-3:1983 [Withdrawn]
Measurement of water flow in closed conduits -- Meters for cold potable water -- Part 3: Test methods and equipment
95.99 ISO/TC 30/SC 7
ISO 4064-3:1999 [Withdrawn]
Measurement of water flow in closed conduits -- Meters for cold potable water -- Part 3: Test methods and equipment
95.99 ISO/TC 30/SC 7
ISO 4064-3:2005 [Withdrawn]
Measurement of water flow in fully charged closed conduits -- Meters for cold potable water and hot water -- Part 3: Test methods and equipment
95.99 ISO/TC 30/SC 7
ISO 4064-3:2014
Water meters for cold potable water and hot water -- Part 3: Test report format
60.60 ISO/TC 30/SC 7
ISO 4064-4:2014
Water meters for cold potable water and hot water -- Part 4: Non-metrological requirements not covered in ISO 4064-1
60.60 ISO/TC 30/SC 7
ISO 4064-5:2014
Water meters for cold potable water and hot water -- Part 5: Installation requirements
60.60 ISO/TC 30/SC 7
ISO/TR 4191:1989 [Withdrawn]
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply -- Recommended practice for laying
95.99 ISO/TC 138/SC 2
ISO/TR 4191:2014
Plastics piping systems for water supply -- Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) -- Guidance for installation
60.60 ISO/TC 138/SC 2
ISO 4422:1990 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO 4422-1:1996 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 1: General
95.99 ISO/TC 138/SC 2
ISO 4422-2:1996 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 2: Pipes (with or without integral sockets)
95.99 ISO/TC 138/SC 2
ISO 4422-3:1996 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 3: Fittings and joints
95.99 ISO/TC 138/SC 2
ISO 4422-4:1997 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 4: Valves and ancillary equipment
95.99 ISO/TC 138/SC 2
ISO 4422-5:1997 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 4427:1996 [Withdrawn]
Polyethylene (PE) pipes for water supply -- Specifications
95.99 ISO/TC 138/SC 2
ISO 4427-1:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General
90.92 ISO/TC 138/SC 2
ISO 4427-1:2007/Amd 1:2015
Melt mass-flow rate (MFR) for PE 80 and PE 100
60.60 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO/NP 4427-1 [Under development]
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General
10.99 ISO/TC 138/SC 2
ISO 4427-2:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 2: Pipes
90.92 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO/NP 4427-2 [Under development]
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 2: Pipes
10.99 ISO/TC 138/SC 2
ISO 4427-3:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings
90.92 ISO/TC 138/SC 2
ISO/NP 4427-3 [Under development]
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings
10.99 ISO/TC 138/SC 2
ISO 4427-5:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system
90.92 ISO/TC 138/SC 2
ISO/NP 4427-5 [Under development]
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system
10.99 ISO/TC 138/SC 2
ISO 4633:1983 [Withdrawn]
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:1996 [Withdrawn]
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:2002 [Withdrawn]
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:2015
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
60.60 ISO/TC 45/SC 4
ISO 6600:1980 [Withdrawn]
Ductile iron pipes -- Centrifugal cement mortar lining -- Composition controls of freshly applied mortar
95.99 ISO/TC 5/SC 2
ISO 6992:1986 [Withdrawn]
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply -- Extractability of cadmium and mercury occurring as impurities
95.99 ISO/TC 138/SC 5
ISO 7259:1988 [Withdrawn]
Predominantly key-operated cast iron gate valves for underground use
95.99 ISO/TC 153
ISO 7858-1:1985 [Withdrawn]
Measurement of water flow in closed conduits -- Meters for cold potable water -- Combination meters -- Part 1: Specifications
95.99 ISO/TC 30
ISO 7858-1:1998 [Withdrawn]
Measurement of water flow in closed conduits -- Combination meters for cold potable water -- Part 1: Specifications
95.99 ISO/TC 30/SC 7
ISO 7858-2:1987 [Withdrawn]
Measurement of water flow in closed conduits -- Meters for cold potable water -- Combination meters -- Part 2: Installation requirements
95.99 ISO/TC 30
ISO 7858-2:2000 [Withdrawn]
Measurement of water flow in closed conduits -- Combination meters for cold potable water -- Part 2: Installation requirements
95.99 ISO/TC 30/SC 7
ISO 7858-3:1992 [Withdrawn]
Measurement of water flow in closed conduits -- Meters for cold potable water -- Combination meters -- Part 3: Test methods
95.99 ISO/TC 30/SC 7
ISO 8795:1990 [Withdrawn]
Plastics pipes for the transport of water intended for human consumption -- Extractability of constituents -- Test method
95.99 ISO/TC 138/SC 5
ISO 8795:1998 [Withdrawn]
Plastics piping systems for the conveyance of water intended for human consumption -- Migration assessment -- Determination of migration values for plastics pipes
95.99 ISO/TC 138/SC 5
ISO 8795:2001
Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints
90.20 ISO/TC 138/SC 5
ISO 9631:1991 [Withdrawn]
Rubber seals -- Joint rings for hot water supply pipelines up to 110 degrees C -- Specification for the material
95.99 ISO/TC 45/SC 4
ISO 10221:1993 [Withdrawn]
Ductile iron pipelines -- Rubber sealing rings for pipelines carrying potable water
95.99 ISO/TC 5/SC 2
ISO 10385-1:2000 [Withdrawn]
Measurement of water flow in closed conduits -- Meters for hot water -- Part 1: Specifications
95.99 ISO/TC 30/SC 7
ISO 10508:1995 [Withdrawn]
Thermoplastics pipes and fittings for hot and cold water systems
95.99 ISO/TC 138/SC 2
ISO 10508:2006
Plastics piping systems for hot and cold water installations -- Guidance for classification and design
90.93 ISO/TC 138/SC 2
ISO 10508:2006/DAmd 1 [Under development]
40.00 ISO/TC 138/SC 2
ISO 10639:2004 [Withdrawn]
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
95.99 ISO/TC 138/SC 6
95.99 ISO/TC 138/SC 6
ISO 10639:2017
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
60.60 ISO/TC 138/SC 6
ISO 11177:2016
Vitreous and porcelain enamels -- Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply -- Quality requirements and testing
90.92 ISO/TC 107
ISO/DIS 11177 [Under development]
Vitreous and porcelain enamels -- Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply -- Quality requirements and testing
40.00 ISO/TC 107
ISO 13056:2011
Plastics piping systems -- Pressure systems for hot and cold water -- Test method for leaktightness under vacuum
90.93 ISO/TC 138/SC 5
ISO 13844:2000 [Withdrawn]
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure
95.99 ISO/TC 138/SC 2
ISO 13844:2015
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes -- Test method for leaktightness under negative pressure, angular deflection and deformation
60.60 ISO/TC 138/SC 5
ISO 13845:2000 [Withdrawn]
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection
95.99 ISO/TC 138/SC 2
ISO 13845:2015
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes -- Test method for leaktightness under internal pressure and with angular deflection
60.60 ISO/TC 138/SC 5
ISO 14236:2000 [Withdrawn]
Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
95.99 ISO/TC 138/SC 2
ISO 15874-1:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO 15874-1:2013
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General
90.93 ISO/TC 138/SC 2
ISO 15874-2:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO 15874-2:2013
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 15874-2:2013/DAmd 1 [Under development]
40.60 ISO/TC 138/SC 2
ISO 15874-3:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15874-3:2013
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 15874-3:2013/DAmd 1 [Under development]
40.60 ISO/TC 138/SC 2
ISO 15874-5:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 15874-5:2013
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO 15874-5:2013/DAmd 1 [Under development]
40.60 ISO/TC 138/SC 2
ISO/TS 15874-7:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 7: Guidance for the assessment of conformity
90.92 ISO/TC 138/SC 2
ISO 15875-1:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 1: General
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 15875-2:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 2: Pipes
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 15875-3:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 15875-5:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO/TS 15875-7:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 7: Guidance for the assessment of conformity
90.92 ISO/TC 138/SC 2
ISO 15876-1:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 1: General
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO 15876-1:2017
Plastics piping systems for hot and cold water installations -- Polybutene (PB) -- Part 1: General
60.60 ISO/TC 138/SC 2
ISO 15876-2:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 2: Pipes
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO 15876-2:2017
Plastics piping systems for hot and cold water installations -- Polybutene (PB) -- Part 2: Pipes
60.60 ISO/TC 138/SC 2
ISO 15876-3:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15876-3:2017
Plastics piping systems for hot and cold water installations -- Polybutene (PB) -- Part 3: Fittings
60.60 ISO/TC 138/SC 2
ISO 15876-5:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 15876-5:2017
Plastics piping systems for hot and cold water installations -- Polybutene (PB) -- Part 5: Fitness for purpose of the system
60.60 ISO/TC 138/SC 2
ISO/TS 15876-7:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 7: Guidance for the assessment of conformity
90.92 ISO/TC 138/SC 2
ISO 15877-1:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General
95.99 ISO/TC 138/SC 2
ISO 15877-1:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 15877-2:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 2: Pipes
95.99 ISO/TC 138/SC 2
ISO 15877-2:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 2: Pipes
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 15877-3:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15877-3:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 3: Fittings
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 15877-5:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 15877-5:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO/TS 15877-7:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 15877-7:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity
90.92 ISO/TC 138/SC 2
ISO 16422:2006 [Withdrawn]
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications
95.99 ISO/TC 138/SC 2
ISO 16422:2014
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications
60.60 ISO/TC 138/SC 2
ISO 16631:2016
Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement
60.60 ISO/TC 5/SC 2
ISO 21003-1:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 1: General
90.93 ISO/TC 138/SC 2
ISO 21003-2:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 2: Pipes
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 21003-3:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 21003-5:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO/TS 21003-7:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 7: Guidance for the assessment of conformity
90.92 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 22158:2011
Input/output protocols and electronic interfaces for water meters -- Requirements
90.93 ISO/TC 30/SC 7
ISO 22391-1:2007 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General
95.99 ISO/TC 138/SC 2
ISO 22391-1:2009
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General
90.93 ISO/TC 138/SC 2
ISO 22391-2:2007 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes
95.99 ISO/TC 138/SC 2
ISO 22391-2:2009
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 22391-3:2007 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 22391-3:2009
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 22391-5:2007 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 22391-5:2009
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO/CD TS 22391-7 [Under development]
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 7: Guidance for the assessment of conformity
30.00 ISO/TC 138/SC 2
ISO/TS 22391-7:2011
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 7: Guidance for the assessment of conformity
90.92 ISO/TC 138/SC 2
ISO 23711:2003
Elastomeric seals -- Requirements for materials for pipe joint seals used in water and drainage applications -- Thermoplastic elastomers
90.93 ISO/TC 45/SC 4
ISO/TS 24520:2017
Service activities relating to drinking water supply systems and wastewater systems -- Crisis management -- Good practice for technical aspects
60.60 ISO/TC 224
ISO 25780:2011
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques
90.92 ISO/TC 138/SC 6
ISO/TR 27165:2012
Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
90.93 ISO/TC 138/SC 2

No matching records found